Skip to content

Be and Be-related impurities in diamond - density functional theory study

MetadataDetails
Publication Date2025-12-22
JournalCondensed Matter Physics
AuthorsK. M. Etmimi, M. A. Ojalah, A. M. Abotruma
InstitutionsUniversity of Tripoli
AnalysisFull AI Review Included
  • Objective: First-principles density functional theory (DFT) investigation of beryllium (Be) and beryllium-nitrogen (Be-N) complexes in diamond to identify viable n-type dopant pathways.
  • Method: AIMPRO plane-wave pseudopotential code with GGA-PBE exchange-correlation functional on 216-atom supercells (3 × 3 × 3 diamond lattice) and 64-atom cells for reorientation barrier calculations.
  • Key Finding — Substitutional Be: Bes with Td symmetry and S = 1 spin state is the most stable configuration, exhibiting a double acceptor level at Ev + 0.71 eV (impractical for room-temperature n-type conduction).
  • Key Finding — Interstitial Be: Off-axis Cs symmetry configuration (Bei,oa1) is the lowest energy interstitial state with a 0.11 eV motional averaging barrier to D3d symmetry.
  • Key Finding — Be-N Co-doping: Nitrogen incorporation progressively reduces formation energy (from +0.28 eV for Bes-N1 down to −4.64 eV for Bes-N4), with Bes-N3 and Bes-N4 complexes creating shallow donor levels at 1.0 eV and 1.16 eV below the conduction band minimum, respectively.
  • Implication: Be-N co-doping (specifically 3 or 4 nitrogen neighbors) represents a promising route toward n-type diamond semiconductors, addressing long-standing challenges with phosphorus and sulfur dopants.

ParameterValueUnitContext
Supercell size (standard)216atoms3 × a0 simple-cubic diamond supercell
Supercell size (NEB)64atomsClimbing Nudged Elastic Band reorientation barriers
Total energy convergence threshold10−5a.u.Geometry optimization criterion
Brillouin zone sampling2 × 2 × 2Monkhorst-Pack meshSpecial k-points
Plane-wave cutoff300a.u.Charge density / Kohn-Sham potential expansion
Basis functions per C / Be atom22Gaussianss, p augmented with d-polarization
Basis functions per N atom40GaussiansSeparate s, p, d sets of four widths
Exchange-correlation functionalGGA-PBE—Perdew-Burke-Ernzerhof
Bes formation energy4.62eVSubstitutional configuration
Bei formation energy10.28eVInterstitial configuration
Bes-N1 formation energy+0.28eVSingle N neighbor
Bes-N2 formation energy−4.07eVTwo N neighbors
Bes-N3 formation energy−4.35eVThree N neighbors
Bes-N4 formation energy−4.64eVFour N neighbors
Reorientation barrier (Cs → D3d)0.11eVInterstitial Be motional averaging
Bes acceptor level (double)Ev + 0.71eVTd symmetry, S = 1
Bes acceptor level (single)Ev + 0.60eVS = 0 configuration
Bes-N1 acceptor levelEv + 0.85eVC3v symmetry
Bes-N3 donor levelEc − 1.0eVShallow donor, C1 symmetry
Bes-N4 donor levelEc − 1.16eVCs symmetry
Be-C bond length (Bes)1.67ÅTd configuration
Be-N bond length (Bes-N1)1.60Å3.9% longer than C-C bond
Be-C bond lengths (Bei,oa1)1.44 / 1.49ÅShortest neighbor distances
Covalent radius (Be)0.96ÅComparative reference
Covalent radius (C)0.77ÅComparative reference
Covalent radius (N)0.734ÅSmaller than C, reduces lattice strain
Be chemical potential sourcehcp Be bulk—Reference state
N chemical potential sourceNH3—Reference state
Computational codeAIMPRO—Plane-wave pseudopotential DFT

  • Code & Framework: First-principles DFT simulations using the AIMPRO plane-wave pseudopotential package with GGA-PBE exchange-correlation functional.
  • Supercell Construction: 216-atom simple-cubic supercell with side length of 3 × a0; reduced to 64-atom cells for climbing Nudged Elastic Band (NEB) reorientation barrier calculations.
  • Brillouin Zone Sampling: Monkhorst-Pack scheme with a uniform 2 × 2 × 2 k-point mesh for structural relaxation and electronic property evaluation.
  • Basis Set Definition: Gaussian-type orbital basis — 22 functions per C/Be atom (fixed s/p linear combinations + d-polarization); 40 functions per N atom (separate s, p, d Gaussian sets of four widths).
  • Convergence Criteria: Geometry optimization via conjugate gradient scheme until total energy change < 10−5 a.u.
  • Plane-Wave Expansion: Matrix elements evaluated with plane-wave cutoff of 300 a.u. for charge density and Kohn-Sham potential.
  • Defect Configurations Investigated: Interstitial Be at BC, AB, H, Td, and off-axis sites; substitutional Be with Td, C3v, C2v symmetries; Bes-Nn complexes (n = 1, 2, 3, 4 nearest nitrogen substitutions).
  • Electrical Level Calibration: Donor levels referenced against Ns0 (Ec − 1.7 eV); acceptor levels referenced against Bs0 (Ev + 0.37 eV) using the marker system method.
  • Diffusion & Reorientation Barriers: Climbing Nudged Elastic Band (cNEB) approach for transition state identification.
  • Hyperfine Tensor Reconstruction: All-electron wave functions reconstructed in the core region using Blöchl-style projector augmentation for EPR parameter prediction.

This DFT study maps out the electronic landscape of an exotic dopant system (Be and Be-N complexes) for prospective n-type diamond semiconductor development. Translating such theoretical predictions into functional devices requires a materials partner capable of precise dopant incorporation, lattice-matched substrates, and validated electronic-grade surfaces.

Applicable Materials:

  • Optical Grade SCD (Single Crystal Diamond): For replicating the substitutional Bes and Bes-Nn geometries with minimal grain boundary effects that would otherwise mask intrinsic point defect signatures. Our SCD is grown via MPCVD with controlled impurity profiles suitable for EPR and Hall-effect characterization of co-doping experiments.
  • Heavy Boron-Doped PCD (BDD): Where co-doping studies require a counter-doping baseline or p-type substrate for junction fabrication, our boron-doped polycrystalline diamond provides a tunable carrier concentration platform.
  • Low-Nitrogen Intrinsic SCD: For isolating the EPR signatures of Bei,oa1 and Bes defects against nitrogen background interference — the paper notes that hyperfine tensors are sensitive to N-donor compensation effects.

Customization Potential:

  • Thickness Engineering: SCD and PCD thin films ranging from 0.1 µm to 500 µm permit fabrication of both bulk-like supercell analogs and thin-film device layers suitable for shallow donor characterization in Bes-N3/N4 complexes.
  • Wafer-Scale Geometry: Plates and wafers up to 125 mm (PCD) enable multi-sample comparative studies across doping concentrations on a single substrate batch.
  • Surface Preparation for Epitaxial Overgrowth: Ra < 1 nm (SCD) and < 5 nm (inch-size PCD) polishing ensures the atomic-scale surface flatness required for epitaxial regrowth and ohmic contact formation on doped layers.
  • Metallization Integration: In-house Ti / Pt / Au, W, and Pd metalization capabilities support immediate fabrication of Hall-bar structures and Schottky contacts for electrical level verification (Ec − 1.0 eV and Ec − 1.16 eV donor states).
  • Laser Cutting & Dicing: Custom die geometries can be produced without contaminating the doped active region — critical for preserving the hyperfine signatures identified in this study.

Engineering Support: The research team at 6CCVD includes PhD-level materials scientists experienced in doping kinetics, MPCVD process optimization, and semiconductor-grade diamond characterization. We can assist with material selection, expected carrier concentrations based on your target Be/N co-doping ratios, and recommendations on polishing and metallization schemes optimized for diamond semiconductor device fabrication. Whether your application targets deep-UV photonics, high-power electronics, or quantum-grade defect centers, our engineering team can provide material consultation grounded in reproducible MPCVD growth.

Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

First-principles density functional simulations were employed to investigate the geometries, electrical properties, and hyperfine structures of various beryllium-doped diamond configurations, including interstitial (Bei), substitutional (Bes), and beryllium-nitrogen (Be-N) complexes. The incorporation of Be into the diamond lattice is more favorable as a substitutional dopant than as an interstitial dopant, although both processes are endothermic. Interstitial Be could potentially exhibit motional averaging from planar to axial symmetry with an activation energy of 0.1 eV. The most stable Bes configuration has Td symmetry with a spin state of S = 1. Co-doping with nitrogen reduces the formation energy of Bes-Nn (n = 1-4) complexes, which further decreases as the number of nitrogen atoms increases. This is attributed to the smaller covalent radius of nitrogen compared to carbon, resulting in reduced lattice distortion. Bes-N3 and Bes-N4 co-doping introduces shallow donors, while Bes exhibits n-type semiconductivity, but the deep donor level renders it impractical for room-temperature applications. These findings provide valuable insights into the behavior of beryllium as a dopant in diamond and highlight the potential of beryllium-nitrogen co-doping for achieving n-type diamond semiconductors.