NANODIAMOND THICK FILMS FOR THERMAL MANAGEMENT
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2025-11-11 |
| Journal | IMAPSource Proceedings |
| Authors | Matthew R. Bauer |
| Institutions | L3Harris (United Kingdom) |
| Analysis | Full AI Review Included |
Technical Documentation: Nanodiamond Thick Films for Thermal Management
Section titled “Technical Documentation: Nanodiamond Thick Films for Thermal Management”Executive Summary
Section titled “Executive Summary”- Core Challenge Addressed: Rising heat densities in miniaturized modern electronics require advanced thermal management solutions that surpass the limits of traditional metallic conductors.
- Solution Validated: Electrophoretic deposition (EPD) of detonation nanodiamond particles (~5 nm) to form dense, thick films exhibiting exceptional thermal conductivity.
- Key Performance Metric: Measured in-plane thermal conductivity of ~1,600 W/mK, reaching approximately 73% of pristine bulk single crystal diamond and 400% higher than copper or silver.
- Material Advantages: Diamond offers a rare combination of extreme thermal conductivity (~1000-2200 W/mK), electrical insulation, low density (3.51 g/cm³), and robust mechanical hardness.
- Process Innovation: Utilization of an iodine/acetone reaction in a 1:1:1 DI Water:IPA:Acetone solvent system to generate a strong positive zeta potential, enabling uniform cathodic deposition of nanodiamond.
- Demonstration: Successfully coated large-area copper foil substrates and fabricated multi-layer laminates with high adhesion, indicating scalability for industrial integration.
- Dielectric Potential: Validated material properties (dielectric constant ~5.7, breakdown strength ~100 MV/m) highlight the dual-functionality of these films for integrated thermal and electrical management.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Nanodiamond Particle Size | ~5 | nm | Detonation-synthesized carbon particles |
| Measured Film Thermal Conductivity | ~1,600 | W/mK | Measured via 3-Omega technique |
| Calculated Film Thermal Conductivity (k) | 1,639 | W/mK | Derived from linear regression of 3ω signal |
| Bulk Diamond Reference | ~2,200 | W/mK | Theoretical maximum for single crystal diamond |
| Copper/Silver Reference | ~400 | W/mK | Conventional metallic thermal conductors |
| Diamond Density | 3.51 | g/cm³ | Significantly lighter than metals |
| Diamond Dielectric Constant | ~5.7 | (unitless) | Favorable for RF/microelectronic integration |
| Diamond Breakdown Strength | ~100 | MV/m | High voltage tolerance for insulating layers |
| Diamond Dielectric Loss Tangent | 0.00005 | (unitless) | Measured at 145 GHz |
| EPD Solvent Ratio | 1:1:1 | (volume) | DI Water : IPA : Acetone |
| EPD Chemical Modifier | Iodine + Acetone | (chemical) | Generates H⁺ to protonate nanodiamond surface |
| Measurement Temperature | Ambient | °C | Room temperature thermal characterization |
| Substrate Thermal Conductivity (Ignored) | 0.08 | W/mK | Negligible compared to nanodiamond film |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: Surface treatments applied to copper foil to optimize roughness, surface tension, and short-range attractive forces (tested micro-etch, oxidation, and various plasma treatments).
- Nanodiamond Functionalization: Suspension of ~5 nm detonation nanodiamonds in a tailored solvent system.
- Zeta Potential Tuning: Introduction of iodine and acetone to drive a chemical reaction (CH₃−CO−CH₃ + 2I₂ → ICH₂−CO−CH₂I + 2H⁺ + 2I⁻), protonating the nanodiamond surface to achieve a strong positive charge for cathodic deposition.
- Solution Engineering: Formulation of a 1:1:1 DI Water : IPA : Acetone mixture to balance high permittivity, low surface tension, and low evaporation rate.
- Electrophoretic Deposition (EPD): Application of an electric field to drive charged nanodiamonds to the substrate, building thick, dense films.
- Post-Processing Anneal: Thermal treatment to finalize the ND film and enhance adhesion.
- Lamination: Multi-layer bonding of nanodiamond-coated large-area copper foils to fabricate robust thermal laminates.
- Thermal Characterization (3-Omega Method): Utilization of a Wheatstone bridge configuration inside an insulated Faraday cage to measure the 3ω voltage response and calculate in-plane thermal conductivity.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials: For research and engineering applications requiring the extreme thermal conductivity validated in this study, our Optical Grade Single Crystal Diamond (SCD) and Polycrystalline Diamond (PCD) are ideal candidates. While this paper utilized nanodiamond thick films, 6CCVD provides the bulk and thin-film diamond substrates necessary for next-generation thermal spreaders and heat sinks. We supply both SCD and PCD wafers/plates up to 125mm, with thicknesses ranging from 0.1µm to 500µm, allowing engineers to match the optimal geometry to their thermal resistance budget. For applications requiring electrical conductivity alongside thermal management, our Boron-Doped Diamond (BDD) offers tunable electrical properties.
Customization Potential: Scaling this research from laboratory demonstrations to production-ready microelectronics requires precise material integration. 6CCVD offers fully internal custom metalization capabilities (Au, Pt, Pd, Ti, W, Cu) to ensure optimal thermal interface bonding, directly analogous to the copper foil lamination demonstrated in the paper. Furthermore, our precision laser cutting and shaping services allow for the exact geometric tailoring required for complex microfluidic channels, small-area thermal test structures, or multi-layer lamination stacks.
Engineering Support: Transitioning from nanodiamond thick films to high-purity diamond interfaces involves critical decisions regarding surface preparation, defect management, and metallization adhesion. 6CCVD’s in-house PhD engineering team specializes in material selection for advanced thermal management and high-power microelectronic projects. We can assist in selecting the appropriate diamond grade, orientation, and metal stack to mitigate common integration challenges such as cracking, delamination, or suboptimal thermal boundary resistance.
Call to Action: For custom specifications, material consultation, or prototype development for your thermal management architecture, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
The decreasing size of modern electronic devices, combined with increasing performance demands, leads to higher heat density in smaller spaces. Efficient diffusion or extraction of this thermal energy may limit the miniaturization of these heat-generating electronics. To enable denser packaging of higher performance chips, innovations are required in thermally conductive materials, liquid or liquid-vapor based heat removal methods, and thermal buffering materials. Diamond has the highest thermal conductivity among all known materials while being uniquely electrically insulating. This is due to its strong covalent bonds, which facilitate high phonon-based thermal conduction, unlike the electron-based thermal conduction found in metals like copper. However, the use of macroscale diamond as a thermal conduction material in electronics is limited by its cost and machinability. In contrast, detonation nanodiamond is relatively inexpensive, produced from a TNT/RDX explosion in an oxygen-poor environment. Furthermore, electrophoretic deposition allows these nanodiamonds to be incorporated into electronics as conformal coatings. Here, we present advancements in the electrophoretic deposition of nanodiamond thick films, their thermal conductivity characterization, and potential applications. This includes suspending nanodiamonds in a solution with high zeta potential, improving deposition chemistry and drying processes to mitigate film cracking, and performing 3-omega thermal conductivity measurements on the deposited films.