Temperature field ultrafast detection and identification quantum sensor based on diamond array
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2025-12-10 |
| Journal | Microsystems & Nanoengineering |
| Authors | Wei Gao, Jinyu Tai, Zhiqiang Xiang, Yunbo Shi, Xin Li |
| Institutions | North University of China, Shanxi University |
| Citations | 1 |
| Analysis | Full AI Review Included |
Technical Documentation: Diamond Array-Based Quantum Temperature Sensor
Section titled “Technical Documentation: Diamond Array-Based Quantum Temperature Sensor”Executive Summary
Section titled “Executive Summary”- Core Achievement: Demonstration of an ultrafast diamond array-based quantum sensor (TDI-DQS) that integrates temperature sensing and neural-network-style computation within a unified in-sensor computing (ISC) architecture.
- Operating Principle: Exploits the strong linear correlation between temperature and the zero-field splitting (ZFS) of nitrogen-vacancy (NV) color centers in diamond to achieve fixed-frequency operation with tunable responsivity.
- Response Speed: Single-shot detection and identification latency of 196.8 µs (196.7 µs thermal + 113.6 ns optical), representing orders-of-magnitude improvement over conventional thermistors (100 ms-10 s) and thermocouples (1 ms-1 s).
- Dual-Parameter Tuning: Microwave frequency (2.86257 GHz / 2.87259 GHz) controls responsivity polarity (positive/negative); microwave power (0-28 dBm) controls responsivity magnitude.
- Sensitivity: Temperature noise spectral density of 219.7 µK/Hz1/2 with average responsivity of 93.77 µA/°C across 27 sub-pixels.
- Array Architecture: 9 pixel regions × 3 sub-pixels (9 × 3 ANN-compatible structure) executing matrix-vector multiplication directly via Kirchhoff’s current summation.
- Power/Cost Advantage: 1989.9 mW total power consumption and $353.7 USD cost, significantly outperforming thermistor (7350 mW) and thermocouple (6810 mW) alternatives.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Diamond Size | 1 × 1 × 0.6 | mm³ | Per sensing element (sub-pixel) |
| Nitrogen Content (Bulk) | 100 | ppm | Element Six CD1008 (100) HPHT diamond |
| NV Concentration | ~0.8 | ppm | Post electron irradiation + annealing |
| Electron Irradiation Dose | 10 MeV, 4 hours | — | NV formation activation |
| Annealing Temperature | 850 | °C | Duration: 2 hours |
| Zero-Field Splitting (ZFS) Frequency | 2.87 | GHz | Reference resonance |
| ZFS Temperature Coefficient | −74 | kHz/°C | Linear shift per degree |
| Optimal Positive Responsivity Frequency | 2.87259 | GHz | R² = 0.993 |
| Optimal Negative Responsivity Frequency | 2.86257 | GHz | R² = 0.991 |
| Linear Operating Range (ΔT) | 63.1-63.2 | °C | Full-scale bandwidth |
| Microwave Power Range | 0-28 | dBm | Responsivity magnitude control |
| Microwave Antenna Dimensions | 22 × 9 × 0.6 | mm³ | Folded dipole array |
| Antenna VSWR | ≤ 2.5 | — | At 2.87 GHz |
| Laser Excitation Wavelength | 532 | nm | Continuous/pulsed operation |
| NV Fluorescence Emission Range | 600-800 | nm | Long-pass filtered |
| Filter Cutoff (Notch) | 532 ± 35 | nm | OD2-3 optical density |
| Filter Transmittance (Signal Band) | ≥90 | % | 600-800 nm range |
| Array Architecture | 9 × 3 | pixels × sub-pixels | 27 total NV sensors |
| System Footprint | 150 × 150 | mm² | Full TDI-DQS assembly |
| Thermal Response Time (90%) | 196.7 | µs | Simulated heat conduction |
| Optical Response Time | 113.6 | ns | Pulsed laser measurement |
| Total Detection Latency | 196.8 | µs | Combined thermal + optical |
| Average Responsivity | 93.77 | µA/°C | 27-sub-pixel mean |
| Total Variance | 170.07 | — | Responsivity consistency metric |
| Noise Spectral Density | 219.7 | µK/Hz1/2 | 100 s acquisition |
| Diamond Thermal Conductivity | 2000-2300 | W/(m·K) | Highest known solid |
| Diamond Density | 3515 | kg/m³ | Simulation parameter |
| Diamond Specific Heat Capacity | 515 | J/(kg·K) | Simulation parameter |
| Max Attenuation at ΔT_max | 14.9 | % | Slope deviation at range upper limit |
| Operating Temperature Range | 36.2-99.2 | °C | Validated linear window |
| Power Consumption (TDI-DQS) | 1989.9 | mW | Full system |
| System Cost | 353.7 | USD | Component-level estimate |
| Laser Diode Model | GH15130C8C | — | SHARP, 4.4 × 5.1 × 1.8 mm³ |
| Photodetector Model | TEMD5010X01 | — | Vishay Si-PIN, 5 × 4.2 × 1.2 mm³ |
| Op-Amp Model | OPA380 | — | Texas Instruments transimpedance |
| ANN Training Epochs | 200 | — | MSE convergence to 0.01 |
| Classification Accuracy | 98.54 | % | Simulated at noise level 0.2 |
Key Methodologies
Section titled “Key Methodologies”- Substrate Selection: Element Six CD1008 (100)-oriented HPHT single-crystal diamond with 100 ppm nitrogen; laser-cut to 1 × 1 × 0.6 mm³ dimensions.
- NV Center Engineering: 10 MeV electron irradiation (4 hours) followed by 850 °C vacuum annealing (2 hours) to achieve ~0.8 ppm NV concentration.
- Surface Preparation: Polishing of sensing face followed by deposition of a 532 nm notch filter (≥90% transmittance at 600-800 nm) directly on the diamond surface.
- Antenna Integration: Folded dipole antenna (22 × 9 × 0.6 mm³) operating at 2.87 GHz (VSWR ≤ 2.5); only the B-unit diamond in each sub-pixel is microwave-excited.
- Optical Readout Architecture: Each sub-pixel contains two diamond units — Unit A (no microwave, captures NRTE-E only) and Unit B (microwave-excited, captures NRTE-E + ZFS-E); differential subtraction isolates ZFS-E contribution.
- Responsivity Calibration: Frequency sweep at 28 dBm microwave power across 27 sub-pixels; mean responsivity 93.77 µA/°C with total variance 170.07 confirmed uniformity.
- Fixed-Frequency Operation: Microwave locked at 2.87259 GHz (positive slope) or 2.86257 GHz (negative slope); eliminates PID feedback latency.
- Dual-Parameter Microwave Modulation: Frequency selects polarity; power (0-28 dBm) modulates magnitude (saturation observed near 26 dBm).
- Matrix-Vector Multiplication: Kirchhoff’s current summation at parallel-connected sub-pixels executes I = RT in the analog domain.
- ANN Encoding: Trained 27-element responsivity matrix physically encoded by tuning per-sub-pixel microwave parameters.
- Response Time Decomposition: Thermal conduction simulated in COMSOL-style FEM (100 °C top surface, 20 °C surrounding); optical response measured via AOM-modulated pulsed laser.
- Classification Test Protocol: Three fault patterns (battery, radiator, chip failure) generated using insulated NiCr heating wires at 99.2 °C; output currents captured via Tektronix MDO4104C oscilloscope.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”This research requires Optical-Grade Single Crystal Diamond (SCD) with controlled NV center density (~0.8 ppm) — achievable via our custom irradiation and annealing service on HPHT or CVD substrates. The exact Element Six CD1008 specification can be replicated or substituted with our internally grown MPCVD single crystal plates. Key requirements match our standard catalog:
| Requirement (Paper) | 6CCVD Equivalent |
|---|---|
| 1 × 1 × 0.6 mm³ SCD elements | Custom laser cutting from plates up to 125 mm (PCD) or equivalent SCD wafers |
| 100 ppm nitrogen content | Custom nitrogen doping during CVD growth |
| ~0.8 ppm NV concentration | Post-growth electron irradiation + 850 °C annealing service |
| (100) orientation, polished face | Ra < 1 nm SCD polish standard |
| 600-800 nm optical transparency | Optical-grade SCD, low birefringence |
Customization Potential
Section titled “Customization Potential”The paper’s 9 × 3 array architecture and dual-unit differential sub-pixel design require precision laser cutting, metallization for antenna bonding, and filter film deposition — all within our in-house capabilities:
- Laser Cutting & Dicing: Sub-millimeter SCD elements (1 × 1 mm) with thickness down to 100 µm achievable; kerf-loss-optimized patterns for array integration.
- Metallization Options: Ti/Pt/Au or Ti/W/Au stacks available for antenna brazing and wire bonding (folded dipole structure compatible with our standard lift-off processes).
- Filter Film Integration: We can deposit customer-specified dielectric stacks (532 nm notch + 600-800 nm bandpass) on polished diamond surfaces prior to dicing.
- Scalable Array Sizes: Beyond the 9 × 3 demonstration, larger N × M arrays (e.g., 16 × 16, 32 × 32) are feasible by extending our MPCVD plate dimensions and dicing tolerances.
Engineering Support
Section titled “Engineering Support”6CCVD’s in-house PhD engineering team can assist with:
- Material Selection: Matching NV density, nitrogen concentration, and crystal orientation to your specific quantum sensing modality (temperature, magnetic field, strain).
- Process Optimization: Recommending irradiation dose/energy and annealing profiles to hit target NV ppm without degrading coherence properties.
- Co-Design Consultation: Recommending diamond thickness and surface polish grades to optimize thermal response time for your ISC architecture (the paper shows 0.6 mm thickness yields ~196.7 µs thermal latency — thinner substrates will reduce this further).
- Hybrid Integration: Pairing diamond elements with photodetector arrays, microwave antennas, and CMOS read-out circuitry for prototype fabrication.
Reliability & Application Notes
Section titled “Reliability & Application Notes”For researchers replicating or extending this work:
- The paper identifies laser degradation and photodetector thermal drift as primary long-term failure modes. Active temperature control of the laser module is recommended for > 1000-hour operation.
- The magnetic sensitivity of NV centers can be mitigated via the three-unit differential structure referenced in Supplementary Fig. 13 — a design enhancement 6CCVD can fabricate upon request.
- For applications requiring higher temperature range, our PCD substrates (up to 10 mm thickness) can serve as alternative thermal platforms; though SCD remains preferred for NV ensemble homogeneity.
Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Ultrafast temperature field detection and identification is crucial for applications ranging from environmental sensing and biomedical monitoring to thermal management in advanced energy systems. Conventional temperature sensors-comprising discrete sensing arrays, data storage units, and external processors-suffer from high latency due to slow sensor response, repeated analog-to-digital conversions, and extensive data transmission inherent to von Neumann architectures. Here, we report a diamond array-based quantum sensor that integrates temperature sensing and real-time processing within a unified in-sensor computing (ISC) architecture. Exploiting the strong linear correlation between temperature and the zero-field splitting of nitrogen-vacancy (NV) color center centers in diamond, we realize a fixed-frequency temperature sensor with ultrafast response and tunable responsivity, enabled by multi-parameter microwave modulate. Matrix-vector multiplication of temperature intensity and responsivity, combined with Kirchhoff’s current summation, enables direct execution of neural-network-style computations on sensed data. The proposed system achieves a single-shot detection and identification latency of just 196.8 μs, as experimentally validated. This work demonstrates a scalable ISC-enabled quantum sensing paradigm, offering a promising route toward high-speed, low-power intelligent temperature field detection.