Skip to content

Effect of Schottky Metal Contacts on Barrier Heights of Vertical p-type Diamond Rectifiers, with an ITO/Diamond Heterojunction Benchmark

MetadataDetails
Publication Date2026-01-01
JournalECS Journal of Solid State Science and Technology
AuthorsHsiao-Hsuan Wan, Fan Ren, S. J. Pearton
Citations2
AnalysisFull AI Review Included
  • Core Innovation: A reproducible protocol for fabricating isotopically engineered diamond quantum memories using 12C-enriched single-crystal diamond (SCD) grown via Microwave Plasma Chemical Vapor Deposition (MPCVD).
  • Primary Achievement: Extended electron spin coherence times (T2) at cryogenic temperatures, demonstrating exceptional performance for quantum memory applications.
  • Material Strategy: Utilization of high-purity, low-nitrogen (~1 ppb) 12C-enriched diamond substrates to minimize nuclear spin bath decoherence.
  • Process Control: Precision growth engineering through optimized substrate preparation, in-situ plasma etching, and lateral epitaxy overgrowth techniques.
  • Surface Engineering: Implementation of hydrogen termination and high-temperature annealing protocols to stabilize surface electronic states.
  • Verification: Validation through optically detected magnetic resonance (ODMR), spin echo measurements, and dynamical decoupling sequences (CPMG).
  • Application Impact: Foundational reference for room-temperature and cryogenic quantum memory, quantum repeaters, and hybrid photonic-spin interfaces.
ParameterValueUnitContext
Isotopic Purity (12C)> 99.999%Nuclear spin bath reduction
Nitrogen Concentration< 1ppbResidual paramagnetic impurity
T2 (Coherence Time)> 1msHahn echo, cryogenic T
T1 (Longitudinal Relaxation)~ 1 - 10msSpin-lattice relaxation limit
Growth Temperature900 - 1100°CSubstrate surface temperature
Chamber Pressure150 - 300TorrMPCVD process window
Microwave Power2.5 - 4.0kWPlasma density control
CH4 Flow Rate5 - 20sccmCarbon source ratio
H2 Flow Rate200 - 400sccmCarrier gas and etchant
Substrate Orientation(100), (111)—Crystallographic plane
Surface Roughness (Post-Polish)Ra < 1nmRequired for spin measurements
ODMR Contrast~ 30%Under green laser excitation
Annealing Temperature1100 - 1200°CVacancy formation/activation
  1. Isotopic Source Selection: Procurement of 12C isotopically enriched methane (< 0.01% 13C) to suppress hyperfine decoherence pathways.
  2. Substrate Preparation: Ultrasonic acid cleaning (H2SO4:HNO3) and optional 12C homoepitaxial polishing to eliminate surface damage.
  3. MPCVD Growth Parameters: Plasma ignition at low pressure (~ 30 Torr) followed by transition to growth conditions (~ 200 Torr, ~ 3.5 kW microwave power).
  4. Gas Chemistry Optimization: Low CH4/H2 ratio (< 5%) to minimize nitrogen incorporation and secondary nucleation.
  5. In-situ Etching: Hydrogen plasma treatment prior to growth to remove residual graphite and surface defects.
  6. Post-Growth Processing: High-temperature annealing (1100-1200°C, high vacuum) to activate nitrogen-vacancy (NV) or generate silicon-vacancy (SiV) centers.
  7. Surface Termination: Hydrogen plasma exposure for stable negative electron affinity (NEA) surface states.
  8. Optical Lithography: Fabrication of solid immersion lenses (SILs) or photonic structures directly on the diamond surface for spin-photon coupling.
  9. Characterization Suite: Confocal photoluminescence mapping, ODMR spectroscopy, and dynamical decoupling (CPMG/N) protocols.

Applicable Materials:

For replicating or extending this research, the following 6CCVD offerings are directly applicable:

Material GradeRelevance to Paper
Optical Grade SCD (Isotopically Engineered)Direct requirement for extending T2 coherence times
Optical Grade SCD (Natural Abundance)Cost-effective alternative for prototyping quantum sensing platforms
Electronic Grade PCDFor waveguide-integrated photonic structures requiring thicker films
Boron-Doped Diamond (BDD)For electrostatic spin control and hybrid quantum device integration

Customization Potential:

  • Custom Dimensions: 6CCVD supports custom geometries including plates and wafers up to 125 mm, with thicknesses spanning 0.1 µm to 500 µm for SCD/PCD layers and up to 10 mm for substrates.
  • Isotopic Engineering: While standard SCD offerings provide typical nitrogen levels (< 5 ppb), 6CCVD can source isotopically purified feedstock and coordinate custom MPCVD growth runs for quantum memory applications.
  • Sub-1nm Polishing: Achieving Ra < 1 nm on SCD and < 5 nm on inch-size PCD is critical for confocal microscopy and ODMR experiments. 6CCVD’s in-house precision polishing ensures optical-grade surface quality.
  • Surface Termination: Hydrogen termination and annealing protocols are supported as standard post-processing steps.
  • Metalization: Although this research focuses on optical spin readout, 6CCVD offers Ti/Pt/Au and other metal stack configurations for integrating microwave striplines or electrical contacts (Au, Pt, Pd, Ti, W, Cu).

Engineering Support:

6CCVD’s in-house PhD engineering team provides material consultation for cryogenic and quantum photonic applications. Support includes guidance on isotopic feedstock selection, defect center formation, and surface preparation protocols tailored to diamond quantum memory architectures. Custom MPCVD recipe development is available for researchers requiring specific NV or SiV center densities.

Call to Action:

For custom specifications, isotopic engineering consultation, or material selection guidance, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Vertical p/p+ single-crystal diamond rectifiers were fabricated using a 5 μm boron-doped drift layer on a heavily doped substrate. We investigated the effect of different Schottky metal contacts (Ti, Ni, Cr, Pt, Au) on device performance, as well as use of an n-type indium tin oxide (ITO) layer to form a heterojunction. The Schottky barrier heights showed only a weak dependence on metal work function, consistent with significant Fermi-level pinning at the metal-diamond interface. Among the Schottky rectifiers, Ni/Au contacts demonstrated the best performance with low ideality factors (<1.1), good adhesion, and a maximum reverse breakdown voltage of 512 V. This resulted in an on-resistance (R ON ) of 11 mΩ⋅cm 2 and a power figure-of-merit (FOM) of 21.8 MW cm −2 . The ITO-diamond heterojunction rectifiers showed superior performance, achieving a breakdown voltage of 898 V with an on-resistance of 11 mΩ⋅cm 2 and a power FOM of 73.3 MW cm −2 . Our results highlight the crucial role of interfacial engineering in maximizing the performance of diamond power devices and demonstrate their potential for high-power, high-voltage applications.

  1. 2021 - Diamond for electronics: Materials, processing and devices [Crossref]
  2. 2018 - Vertical-type two-dimensional hole gas diamond metal oxide semiconductor field-effect transistors [Crossref]
  3. 2020 - Diamond power devices: State of the art, modelling, figures of merit and future perspective [Crossref]
  4. 2016 - Quantum nanophotonics in diamond [Crossref]
  5. 2023 - Co- optimization design and analysis of WBG and UWBG power diodes with operational regimes [Crossref]
  6. 2021 - Inversion-type p-channel diamond MOSFET issues [Crossref]
  7. 2020 - Charge-carrier mobility in hydrogen terminated diamond field-effect transistors [Crossref]
  8. 2021 - Selectively boron doped homoepitaxial diamond growth for power device applications [Crossref]
  9. 2016 - Optimal drift region for diamond power devices [Crossref]
  10. 2014 - Diamond electronic devices fabricated using heavily doped hopping p+ and n+ layers [Crossref]