Skip to content

Democratizing Quantum Regime Engineering - From Homeostatic Quantum Computing Concepts to Backyard Shed Experiments

FieldValue
JournalZenodo (CERN European Organization for Nuclear Research)
Published2026-02-13
AuthorsSmith John Richard, SHAI / HATI
DOI10.5281/zenodo.18629168

The revision adds a $0 to $200 cloud bridge between Earth’s-field NMR and hands-on NV diamond sensing. It treats cloud access as a diagnostic training tier, not a replacement for local hardware. The added section defines experiments and limits but reports no qubit measurements or performance claims.

Earth’s-field NMR gives practitioners direct experience with coherent oscillation, dephasing, and refocusing. The next hardware tier requires more costly equipment. The authors argue that Lindblad diagnostics transfer from proton spins to superconducting transmons and trapped ions. Cloud qubits have higher Larmor frequencies, shorter coherence times, and different noise spectra than Tier 2 proton spins.

TierApproximate costMain activityCore capability
Tier 2$500 to $2,000EFNMRRabi, Ramsey, inversion recovery, spin echo
Tier 2.5$0 to $200Cloud accessRabi, Ramsey, inversion recovery, CPMG, noise comparison
Tier 3$1,000 to $5,000NV diamond sensingSolid-state coherence, ODMR, dynamical decoupling
Tier 4Free or low costQuTiP and cloudLindblad backaction and parameter interference simulation

Audio-frequency electronics give way to microwave sources and optical alignment. Required skills move from soldering and signal processing to laser safety and RF engineering. The parts list assigns $0 to IBM Quantum, IonQ, and Rigetti free-tier access. Optional AWS Braket credits are listed at $0 to $200 and enable additional backends and higher shot counts. The recommended progression is 2 to 2.5 to 3 to 4 where resources permit. An alternative path uses 2 to 2.5 to 4 and omits local Tier 3 work.

Cloud hardware preserves the diagnostic logic of EFNMR while changing the measurement timescale and noise sources. Rabi experiments vary the rotation angle and fit the excited-state population to extract oscillation contrast. Departures from unit contrast indicate readout error and incoherent processes during the gate. Ramsey experiments use two pulses, a variable delay, and an intentional pi rotation to introduce detuning. The decay envelope yields the dephasing time. Inversion recovery prepares the qubit with a gate, inserts a delay, and fits exponential decay to obtain the relaxation time. The planned H parameter calculation combines relaxation and dephasing times with the reported gate duration. The Ramsey functional form matches Tier 2, but the timescale differs by approximately six orders of magnitude. The protocol places EFNMR fringes in milliseconds and superconducting fringes in microseconds. The authors present this as a methodological analogy, not an equality of coherence performance.

Noise spectroscopy and cross-platform tests

Section titled “Noise spectroscopy and cross-platform tests”

CPMG sequences extend the Tier 2 Hahn echo method by sweeping total free-evolution time. Filter-function inversion then estimates the environmental noise spectral density from coherence decay. The proposed Python notebook is unavailable because its GitHub repository remains a placeholder. Cross-platform work uses the same Rabi, Ramsey, inversion recovery, and CPMG set on at least two providers. The named providers are IBM Quantum with Qiskit, IonQ with Cirq or its native SDK, and Rigetti with Quil or pyQuil. Identical circuits allow platform-specific results to expose differences in the same diagnostics. The planned comparison sheet includes T1, T2, T2*, their ratios, the H parameter, and noise class. The regime labels cover coherent or incoherent, Markovian or non-Markovian, and relaxation or dephasing dominance. They also include white, 1/f, and Lorentzian noise classes. The authors expect cloud superconducting noise to contain low-frequency charge or flux noise and possible TLS Lorentzian features. EFNMR noise is described as 50 or 60 Hz mains hum, thermal Johnson noise, and mechanical vibration. Documenting this difference is the stated central goal.

The HQC mixing console is a control metaphor for independent channels. Gate pulses map to coherent drive, with amplitude and duration setting the rotation angle. Platform-reported dephasing and damping correspond to parameters that users can measure but not adjust directly. Dynamical decoupling maps to the choice of CPMG or XY sequences. Operating frequency acts as a platform-set bias, with little user control on free tiers.

HQC elementCloud analogueUser control
Coherent driveGate amplitude and durationSet parameterized rotation
Dephasing rateRamsey and echo measurementsCharacterize only
Damping rateInversion recoveryCharacterize only
Dynamical decouplingCPMG and XY sequencesSelect and design sequence
BiasQubit operating frequencyPlatform sets value

Most free tiers restrict pulse-level access, so the mixing console remains an approximation. Cloud users can adjust coherent drive through gate parameters, while the provider fixes most dissipative channels. The proposed regime workflow starts with stability, then computes H and classifies the noise spectrum. The axes cover coherent versus incoherent, Markovian versus non-Markovian, and relaxation versus dephasing dominance. This produces a regime classification with the same decision tree used for EFNMR.

Logging calibration and backend conditions

Section titled “Logging calibration and backend conditions”

Cloud runs require an adapted S0 baseline because users do not control the experimental environment. Each run records the calibration timestamp, job submission time, and job completion time. A calibration update during execution causes the result to be flagged as potentially inconsistent. The platform calibration snapshot becomes the recorded set of environmental conditions. The Appendix H JSON schema applies without modification. Fields include the system identifier, base temperature in millikelvin, qubit frequency in gigahertz, calibration time, and shot count. Provider pulse schedules, backend topology, and reported error rates are logged with the experimental data. Platform properties can change every few hours, so calibration and job timestamps remain part of the measurement record. The protocol also requires noting any logging adaptations used for Tier 2.5.

Cloud data can test the predicted distinction between amplitude damping and pure dephasing through their entropy trajectories. The planned comparison expects nonmonotonic entropy for amplitude damping and monotonic entropy for pure dephasing. Operating-point tests can examine regime-dependent steady states where pulse-level access permits. Interleaved relaxation measurements can probe drift and recovery, although cloud queues limit the perturb-and-recover method. Cross-platform H values test whether one parameter remains consistent across superconducting, trapped-ion, NMR, and NV diamond systems. Tier 4 then compares QuTiP predictions with cloud results and examines model residuals against the H parameter. These checks remain prospective in the revision.

Limits on real-time control and interpretation

Section titled “Limits on real-time control and interpretation”

Cloud job queues can run from minutes to hours and remove the real-time perception-and-action loop available at an EFNMR bench. Results arrive in batches, so parameter changes cannot follow the signal in real time. Users can change coherent drive through gate parameters, but most dissipative channels remain fixed by the hardware. Finite repetitions introduce shot noise, unlike the continuous analog signals produced by EFNMR. The authors warn that statistical noise can obscure physical effects during early practice. Calibration cycles, frequency shifts, and TLS fluctuators can also change results between submissions. Cloud access cannot replace Tier 3’s hands-on optical alignment, microwave engineering, or Lindbladian synthesis. It also cannot supply the practical intuition gained from building a local quantum system. For NV diamond work, cloud data can prepare a practitioner to interpret local noise before commissioning the optical and microwave system. Local alignment and microwave engineering remain necessary for the actual measurement. Cloud results should calibrate expectations, not certify the local system.

Tier 3 calls for open-source NV diamond sensing with optical alignment and microwave engineering. The 6CCVD diamond materials catalog lists MPCVD-grown single-crystal and polycrystalline diamond plates and wafers up to 125 mm, but the revision gives no NV-center specification. The engineering support page can check a listed plate or wafer against the final sensing specification.

View Original Abstract

AbstractThis paper introduces an educational bridge between the conceptual framework ofHomeostatic Quantum Computing (HQC) and accessible, hands-on experiments that canbe performed in a home workshop or classroom setting. HQC reframes open quantumsystem control as a regime engineering problem, replacing binary notions of coherenceversus decoherence with a continuous diagnostic parameter H that separates Darwinian(jump-dominated, H << 1) from geometric (smooth-flow, H >> 1) dynamical regimes. Wepresent a tiered programme of experiments—from polarization optics demonstrations($50-$300) through Earth’s-field nuclear magnetic resonance ($500-$2,000) toopen-source nitrogen-vacancy diamond sensing and QuTiP simulation—designed to buildphysical intuition for Lindblad dynamics, regime characterization, noise spectroscopy, anddissipative control without requiring institutional laboratory resources. Each experiment ismapped to specific elements of the HQC framework and the Regime-First Bench Bookdiagnostic methodology. No claims of quantum computational advantage are made; thiswork is strictly educational, methodological, and outcome-agnostic. All materials arereleased under CC BY-NC-SA 4.0 to encourage community adaptation and extension. Keywords: quantum computing, homeostatic control, Lindblad dynamics, regimecharacterization, open quantum systems, quantum sensing, NV centers, educational outreach, citizen science, backyard quantum experiments, HATI methodology