Skip to content

A three-dimensional multimode lumped-element resonator for collective spin manipulation and dispersive readout

FieldValue
JournalApplied Physics Letters
Published2026-06-01
AuthorsZ Y Chen, Wen-Hua Qin, Han-Yu Ren, Ziyi Liu, Kae Nemoto
DOI10.1063/5.0321656
Citations1

A macroscopic ensemble of negatively charged nitrogen-vacancy centers in diamond coupled to two antisymmetric modes of a three-dimensional X-shaped resonator. The experiment ran at 28 mK and extracted a collective coupling of 5.0 MHz. A readout mode detuned by 67.7 MHz showed a 0.27 MHz shift without direct spin-resonator energy exchange.

Collective control and dispersive readout require different frequency relationships with the spins. One mode must exchange energy with the spins during a collective drive. A second mode must remain detuned so it can detect spin polarization through a dispersive frequency shift. Both modes need a homogeneous magnetic field over the same ensemble to support uniform collective dynamics.

Two-dimensional higher-harmonic and cascaded coplanar-waveguide resonators can provide multimode operation, but the paper reports poorer magnetic-field homogeneity for those approaches. The bowtie-inspired, cross-shaped three-dimensional geometry concentrates magnetic fields in the central slots and makes the two antisymmetric modes overlap the same spins. Earlier multimode concepts reduced cross-talk, but the authors identify integration with homogeneous collective coupling as the unresolved challenge.

Four triangular, wing-like elements form the inner structure. The gaps between the wings and the top lid create most of the capacitance. Current around the X-shaped slot supplies geometric inductance, giving the lumped-element relation (f = 1/\sqrt{LC}). The RF current lies near the metallic surface within a skin depth of several micrometers. Four microwave connectors sit near the wings, and up to four spin ensembles can occupy the central slots.

The electric-potential symmetry defines four modes. The all-symmetric mode (S(x,y)) sends its magnetic field away from the center. The antisymmetric modes (A(x)) and (A(y)) concentrate the field in the central slots. The hybrid mode (A(S(x),S(y))) distributes the field in both regions. Mode (A(y)) has the higher resonance because its y-axis wings are shorter. The shorter wings reduce effective capacitance, which raises the resonance frequency.

Other symmetry combinations are forbidden in this structure. Modes (A(x)) and (A(y)) are mutually decoupled and decoupled from the other modes. Orthogonal connector placement reinforces that separation.

The base and enclosure were made from oxygen-free copper and plated with silver approximately 7 µm thick. Mirror-level polishing reduced skin-effect loss, and the silver offered higher conductivity and oxidation resistance than the copper. Four ports were integrated into the enclosure.

Fabrication, polishing, and assembly deviations partly broke the intended symmetry. Even so, transmission measurements gave cross-talk suppression exceeding 30 dB. The result supports the use of geometric symmetry to isolate the modes while they share the spin region.

Resonance frequencies remained sensitive to geometric deviations. Attaching dielectric films such as Teflon to the wing surfaces increased capacitance and reduced the resonance frequency. Turning the connectors changed the coupling capacitance and external coupling rate. The undercoupled resonator reached a total quality factor of up to 1800. Inserting a connector farther into the cavity produced coupling rates above 6 MHz and a total quality factor below 300. Each port was independently tunable.

The experiment used one dark, nontransparent HPHT-grown single-crystal diamond with an NV center concentration of 55 ppm. Its dimensions were 3.17 × 3.15 × 0.52 mm³, and the estimated total NV population was (4 \times 10^{16}). The crystal sat at the center of a superconducting three-dimensional Helmholtz vector magnet inside a dilution refrigerator.

The static magnetic field was aligned with the [100] crystallographic direction. This alignment made the four NV sub-ensembles degenerate. The setup treated all spins as homogeneously coupled to the resonator field.

The strong-coupling map measured port 1 to port 2 for mode (A(x)) and port 3 to port 4 for mode (A(y)) as the static field changed. Each mode showed an avoided crossing when its frequency reached the NV transition.

ModeResonance frequencyHWHMStatic field for NV resonance
(A(x))3.1598 GHz0.995 MHzapproximately 14.2 mT
(A(y))3.2275 GHz0.911 MHzapproximately 17.0 mT

The extracted collective coupling was 5.0 MHz for both antisymmetric modes. This coupling was larger than either measured mode HWHM, consistent with the reported strong-coupling regime. The inhomogeneous broadening of the spin ensemble was estimated at 6 MHz HWHM.

At zero external magnetic field, the (m_s = -1) and (m_s = +1) NV states were degenerate at 2.87 GHz. A static field then raised the (m_s = 0) to (m_s = +1) transition into resonance with mode (A(x)) at 3.1598 GHz. Mode (A(y)) remained 67.7 MHz away from the spin transition.

A weak probe continuously monitored mode (A(y)) through its transmission from port 4 to port 3. The spins remained well polarized in their ground state at 28 mK. The measured transmission amplitude and phase gave a dispersive shift of 0.27 MHz.

The readout met the paper’s dispersive condition because the 67.7 MHz detuning was much larger than the 5.0 MHz collective coupling. The readout mode therefore did not exchange photons directly with the spins. Both the (m_s = 0) to (m_s = -1) and (m_s = 0) to (m_s = +1) transitions contribute to the dispersive shift.

The authors estimated that (2 \times 10^{16}) NV spins participated in the (m_s = +1) state. Using (g_{\mathrm{col}} = g_0\sqrt{N}), they obtained a single-spin coupling of (g_0/2\pi = 35) mHz. The observed shift was insensitive to the inhomogeneous broadening because that broadening was much smaller than the readout detuning.

The experiment used one HPHT-grown crystal with one NV concentration. The paper does not report how performance changes with defect concentration, crystal growth method, or temperature. Readout was measured with spins polarized in the ground state at 28 mK, so operation with thermal spin populations was not established.

The Hamiltonian neglects hyperfine and spin-spin interactions. The total defect count, participating defect count, and inhomogeneous broadening were also estimates rather than direct counts.

The dispersive measurement produced a slight reduction in transmission amplitude and quality factor relative to the bare resonance. The authors attributed this change to residual spin-induced loss. Thus, the readout did not produce a perfectly unchanged resonator response.

Engineering implications for diamond devices

Section titled “Engineering implications for diamond devices”

The result separates driving and readout into two frequency conditions. Resonant tuning supports collective energy exchange, while the 67.7 MHz detuning enables a 0.27 MHz dispersive signal without direct photon exchange.

For diamond selection, the demonstrated reference points are a single crystal, 55 ppm NV centers, and a [100] crystallographic alignment. The crystal must fit the central slots and overlap the mode field. The paper does not establish these values as general performance specifications.

The resonator also shows why mode symmetry and assembly control matter. Imperfections leave residual leakage, while dielectric loading and connector adjustment provide in situ control of frequency and coupling.

The authors suggest use in hybrid spin-photon systems, multimode solid-state quantum technologies, and studies of collective nonlinear behavior such as superradiance and superabsorption. The demonstrated architecture supports collective drive and microwave-only readout in one device near 3 GHz without optical elements.

View Original Abstract

We report a three-dimensional lumped-element multimode microwave resonator that enables homogeneous collective manipulation and dispersive readout of a macroscopic spin ensemble. By exploiting geometric symmetry, two anti-symmetric modes with strongly suppressed crosstalk are engineered to spatially overlap and couple to the same ensemble at distinct frequencies. Using negatively charged nitrogen-vacancy (NV−) centers in diamond at 28 mK, we observe a collective coupling strength of 5.0 MHz, which is in the vicinity of strong-coupling regime, and demonstrate nondestructive dispersive readout via a detuned mode. The compact design, tunable coupling, and high field homogeneity make this resonator a versatile device for hybrid spin-photon systems and multimode solid-state quantum technologies.

  1. 1992 - Observation of normal-mode splitting for an atom in an optical cavity [Crossref]
  2. 2010 - Strong coupling of a spin ensemble to a superconducting resonator [Crossref]
  3. 2011 - Cavity QED with magnetically coupled collective spin states [Crossref]
  4. 2014 - Fast, low-power manipulation of spin ensembles in superconducting microresonators [Crossref]
  5. 2014 - Multimode storage and retrieval of microwave fields in a spin ensemble [Crossref]
  6. 2015 - Microwave multimode memory with an erbium spin ensemble [Crossref]
  7. 2017 - Coherent rabi dynamics of a superradiant spin ensemble in a microwave cavity [Crossref]
  8. 2018 - Loop-gap microwave resonator for hybrid quantum systems [Crossref]
  9. 2016 - Collective strong coupling with homogeneous rabi frequencies using a 3D lumped element microwave resonator [Crossref]
  10. 2014 - Three-dimensional cavity quantum electrodynamics with a rare-earth spin ensemble [Crossref]