Digital to Wave - Paradigm Shift in Quantum Wave-Based Computing and Lab-Grown Diamond Memory
Paper details
Section titled “Paper details”| Field | Value |
|---|---|
| Journal | Zenodo (CERN European Organization for Nuclear Research) |
| Published | 2026-07-21 |
| Authors | MUN SEOK LEE |
| DOI | 10.5281/zenodo.21464223 |
The paper’s central result is a theoretical wave-computing architecture, not a demonstrated device. Its capacity model gives 37.5 PB inside a proposed 10 mm × 10 mm × 3 mm lab-grown diamond cube. The design also claims sub-nanosecond addressing, 1,024 to more than 4,096 multiplexed modes, and zero operational power after writing. These performance figures are model outputs or design targets.
Model status and result boundaries
Section titled “Model status and result boundaries”The 2026 Zenodo manuscript is marked as a preprint submitted to PNAS. Its contribution is a set of equations and architecture proposals for Quantum Wave Computing and Quantum Wave Memory. The numerical results come from analytical wave equations, phase and amplitude rules, and a lattice-point count. The manuscript reports no ESR measurement, microscopy, electrical test, or timing experiment.
GPASC encodes geometry, phase, amplitude, wavelength or frequency, and coding in one wave packet. Geometry acts as one dimension, while phase, amplitude, and spectral properties supply the other three. The architecture addresses data through physical electrode intersections in three dimensions rather than wavelength.
Matrix contractions occur at converging wave paths and avoid sequential software loops. The paper attributes speed of light operation to this physical convergence. That statement describes wave propagation rather than a measured end-to-end system latency.
Memory material and signal encoding
Section titled “Memory material and signal encoding”The QWM treats lab-grown diamond containing nitrogen-vacancy centers as a non-volatile spin ensemble memory at room temperature. Applying GHz current pulses at selected nano-electrode crossings produces local alternating magnetic fields. Those fields drive ESR near 2.87 GHz through the NV centers’ Zeeman response. The model retains spin phase and standing-wave state after the write pulse.
Addressing follows the sequence of physical crossings, which the paper says bypasses diffraction limits. A mu-metal and graphene housing is intended to suppress external electromagnetic and thermal noise. The paper does not report a measured signal-to-noise ratio for this arrangement.
The paper reports two spatial scales. The diamond unit cell is 0.356 nm. The capacity calculation instead assumes approximately 10 nm between projected electrodes. The model therefore does not wire every atomic site.
Numerical encoding is linear in amplitude. Zero maps to zero, 1 maps to the minimum amplitude, and 2 maps to twice that amplitude. Positive values use 45° phase, while negative values use 225°. FDM and WDM channels around the ESR band separate data attributes and modalities. The paper lists numerical, character, acoustic, color, and matter-wave content for this encoding. The claimed zero post-write power comes from phonon confinement in high-Debye-temperature diamond.
Wave logic and spatial operations
Section titled “Wave logic and spatial operations”The spatial operation maps indices 0 to 9 onto a 3 × 3 grid. Eight perimeter directions have 45° phase separation, and opposing nodes differ by 180°. Constructive interference represents addition, while destructive interference represents subtraction. The central positions 0 and 5 form the mixer node. Nonlinear ESR modulation supplies multiplication, and an amplitude control loop supplies division.
Because the lattice is atomic, the paper replaces continuous derivatives with finite differences between adjacent i-index nodes. Each x-direction step corresponds to 0.356 nm. The contraction time is claimed not to increase with matrix dimension because waves converge through the central node.
AND and OR use thresholds of 1.5 and 0.5 times the baseline amplitude, respectively. XOR cancels opposite sign phases, and NOT shifts positive 45° phase to negative 225° phase. These are functional specifications rather than measured gate delay, energy, or noise margin results.
Capacity, latency, and benchmarks
Section titled “Capacity, latency, and benchmarks”The capacity calculation provides the paper’s most concrete numerical result.
| Quantity | Paper value | Condition or basis |
|---|---|---|
| Storage estimate | 37.5 PB | 10 mm × 10 mm × 3 mm cube, 10 nm wiring, 1 bit per lattice point |
| Physical addressing | Sub-nanosecond | Claimed three-dimensional tensor addressing |
| In-memory search | Within 1 ns | Resonance matching of consonant or vowel frequencies |
| Multiplexed modes | 1,024 to over 4,096 | FDM or WDM channels at one lattice point |
The 37.5 PB estimate is the paper’s minimum case. The maximum discussion invokes spatial multiplexing and the yottabyte class without a numerical result. The paper provides no numeric benchmark against CMOS, cryogenic qubits, DRAM, or NAND. It also omits energy per operation and a measured end-to-end benchmark.
Two latency statements differ. The abstract claims sub-nanosecond physical addressing, while the supporting text states a consonant or vowel search within 1 ns. The manuscript does not reconcile those claims. The 1 ns search applies to resonance matching at selected intersections rather than a complete processor workload.
Reasoning and cryptographic functions
Section titled “Reasoning and cryptographic functions”The 5W1H memory layout separates six contexts: Who, When, Where, What, Why, and How. Each context occupies a frequency and phase channel at a lattice address. The Sinograph extension reserves memory for 400 primitive characters in five spatial regions.
QIS extracts What and How, then couples them at a nonlinear mixer. High-probability paths serve conventional answers, while low-probability paths serve creative alternatives. A threshold rejects candidates below the baseline semantic amplitude. The approach reduces sequential autoregressive work, but the paper reports no accuracy or latency test.
WIC links bio-impedance with vacancy-based PUF spectra. Its six stages use time-varying addresses, an asymmetric spin diode, Dirac-delta matching, liveness detection, partial-trace coherence, and T1 stress gating. The proposed stress filter locks the device when the NV-center spin relaxation time shortens under coercion. Smartphone pulses in the 24 GHz to 60 GHz band support biometric modulation. No cryptanalysis, hardware replication test, or false-positive rate is reported.
Engineering gaps and device implications
Section titled “Engineering gaps and device implications”Fabrication is the main unresolved step. The paper calls for localized nano-electrode cross-points and finite element analysis under continuous high-frequency GHz excitation. Its discussion identifies phonon leakage and cross-talk when multiplexing exceeds 4,096 modes. Precise gating is also needed to avoid amplifying white noise on low-probability creative paths. The biometric filter needs an FFT window that avoids false lockdowns during transient anxiety.
For material selection, the paper requires NV centers, microwave-accessible spin states, and a lattice suitable for the proposed addressing. It does not specify nitrogen concentration, NV density, defect uniformity, or a measured spin-coherence criterion. Device work must also resolve the difference between 0.356 nm lattice physics and 10 nm wiring assumptions.
Useful first measurements are write retention, addressed ESR response, readout signal, energy, latency, and crosstalk. Until then, speed, capacity, and power figures remain design targets.
Materials and support
Section titled “Materials and support”6CCVD’s diamond materials catalog lists single-crystal and polycrystalline diamond grown by MPCVD, with metallization available in Au, Pt, Pd, Ti, W, or Cu. The proposed QWM application needs an NV-center-bearing 10 mm by 10 mm by 3 mm substrate, a 0.356 nm lattice, and patterned nano-electrodes for ESR operation. Engineering support can help assess whether those base material and metallization choices match the paper’s fabrication requirements, because the paper gives no nitrogen concentration or defect-uniformity target.
View Original Abstract
Abstract Conventionally, information has been processed and conceptualized within a digital binary paradigm, wherein ‘0’ and ‘1’ are dictated by voltage thresholds and the discrete presence of electrons or currents. However, shifting the fundamental unit of information from digital bits to continuous wave-states enables the representation and utilization of an infinite spectrum of configurations inherent in wave dynamics. Crucially, waves exhibit the physical characteristic of mutual interference—a natural mechanism of interaction among distinct informational waves. This enables the scientific exploitation of a multi-faceted harmony and operational freedom of information that fundamentally resonates with the physical realities of inter-informational relationships. This paper theoretically formulates a novel paradigm for wave computing and lab-grown diamond (LGD) memory networks, designed to fundamentally transcend the intrinsic physical limitations, capacity thresholds, and scaling challenges of conventional digital computing and transistor-based semiconductor and quantum computing architectures. It establishes a model that substantiates this paradigm as a rigorous mathematical standard. The proposed Quantum Wave Computing (QWC) and Quantum Wave Memory (QWM) framework seeks to completely replace discrete electrical charge operations and unstable, cryogenic quantum bits with continuous, deterministic spin-wave interactions within a room-temperature LGD crystal lattice. By exploiting the harmonic wave dynamics inside a 0.356 nm diamond lattice, this integrated hardware-software architecture is an attempt to directly resolve the critical bottlenecks of the memory wall, the power wall, and thermal runaway. The system operates as a deterministic spatial wave computer that executes multi-modal data compression, complex logical mapping, and non-volatile data retention entirely within the electromagnetic resonance spectrum at the speed of light. Structurally, the architecture utilizes three-dimensional tensor addressing via time-varying physical address functions, achieving sub-nanosecond physical addressing and near-zero operational power while aiming for linear scaling expansion. Furthermore, this paper implements the 5W1H wave-filtering protocol, which enables the instantaneous physical extraction of high-probability conventional responses and low-probability creative alternative solutions through engineered constructive and destructive interference spaces. To protect this volatile cryptographic domain against advanced hardware replication and coercive exploitation, a multi-stage on-chip quantum biometrics pipeline is introduced. This framework physically synchronizes user bio-impedance vectors with inherent carbon-vacancy physical unclonable function (PUF) spectrums, utilizing Dirac delta integrations, density matrix partial traces, and limbic system-linked spin relaxation (T_1) gating to control gate opening and forced lockdowns. Concurrently, by factoring in the logographic and ideographic properties of Chinese characters, the character-phoneme composition architecture presented herein could offer a novel alternative for character-based computing within the Sinosphere. Future engineering deployments will focus on fabricating localized nano-electrode array cross-points to empirically map the thermodynamic stability limits and scaling attributes of the physical diamond lattice. Ultimately, this comprehensive theoretical framework serves as a foundational blueprint for next-generation artificial intelligence infrastructure and massive system simulations. It urges subsequent researchers to empirically validate and physically demonstrate this proposed paradigm across wave computing, quantum biometrics, and the structural formation theory of Chinese characters, thereby transcending these paradigms to catalyze advanced scientific and technological developments and contribute to the ecosystem of shared human knowledge.
High Concentration Quantum Grade Single Crystal Diamond
View Specs →Products
View Specs →