Skip to content

Extraction of second harmonic from an InP based planar Gunn diode using diamond resonator for milli-metric wave frequencies

MetadataDetails
Publication Date2015-12-18
JournalSolid-State Electronics
AuthorsMohamed Ismaeel Maricar, Ata Khalid, David R. S. Cumming, C. H. Oxley
InstitutionsUniversity of Glasgow, University of Nottingham
Citations6

Planar Indium Gallium Arsenide (In0.57Ga0.47As) Gunn diode was fabricated on a semi-insulating indium phosphide substrate with on chip matching circuit to enable the extraction of second harmonic in millimeter and terahertz frequencies. The In0.57Ga0.47As planar Gunn diodes were designed with an active length of 4 μm, channel width of 120 μm and integrated with a novel diamond resonator to suppress the fundamental and extract the second harmonic. The experimental results gave good fundamental suppression and extraction of second harmonic (121.68 GHz) with an RF output power of āˆ’14.1 dBm. This is highest recorded power at the second harmonic from a planar Gunn diode.

  1. 1993 - Microwave oscillations of current in III-V semiconductors [Crossref]
  2. 2007 - Planar Gunn-type triode oscillator at 83GHz [Crossref]
  3. 2007 - A planar gunn diode operating above 100GHz [Crossref]
  4. 2011 - Design, fabrication and characterization of InGaAs-channel planar Gunn diodes for millimeter wave applications [Crossref]
  5. 2013 - In0.53Ga0.47As Planar Gunn Diodes operating at a fundamental frequency of 164GHz [Crossref]
  6. 1982 - Transferred-electron oscillations in In0.53Ga0.47As [Crossref]
  7. 2008 - Terahertz Gunn-like oscillations in InGaAs/InAlAs planar diodes [Crossref]
  8. 2014 - Experimentally estimated dead space for GaAs and InP based planar Gunn diodes
  9. 2014 - Design and characterization of a novel diamond resonator [Crossref]