Skip to content

Heavily boron doped nano-crystalline diamond growth by MW-LA-PECVD

MetadataDetails
Publication Date2017-01-01
JournalDeposito de Investigacion Universidad de Sevilla (University of Seville)
AuthorsAndy Taylor, Petr Ashcheulov, Pavel Hubı́k, Ladislav Klimša, Jaromı́r Kopeček
AnalysisFull AI Review Included
  • Methodology: Microwave Linear Antenna Plasma Enhanced Chemical Vapor Deposition (MW-LA-PECVD) used to grow heavily boron-doped nano-crystalline diamond (BNCD) films over large substrate areas.
  • Key Achievement: Demonstrated high electrical conductivity (> 25 S·cm-1) in BNCD layers without silicon carbide (SiC) contamination at the grain boundaries.
  • Process Window: Investigated deposition temperatures from 250 °C to 750 °C using temperature-controlled substrate stages, expanding the low-temperature coating capability for temperature-sensitive substrates.
  • Electrochemical Performance: 300 nm thick hydrogen-terminated BNCD layers achieved a wide potential window of ~1.5 V in PBS electrolyte vs. Ag/AgCl, with a capacitance of 13 µF/cm2—comparable to standard BNCD layers with metallic conduction.
  • Material Purity: STEM-EDX analysis confirmed a sharp diamond/Si interface, homogeneous boron content, and a native SiO2 layer with no Si migration into the diamond grain boundaries.
  • Optical Properties: ~350 nm thick highly conductive layers maintained optical transmission between 55% and 75% at 450 nm, decreasing with higher boron incorporation.
  • Scalability: Successfully demonstrated coating on 6-inch (15 cm) quartz wafers, with current capability extended to 8-inch and modular scalability for larger formats.
ParameterValueUnitContext
Substrate SizeUp to 8 (potential for larger)inchScalable modular deposition on quartz
Layer Thickness~300 to 350nmThin film conductive BNCD
Deposition Temperature250 - 750°CWide range, low-T capability demonstrated
Electrical Conductivity0.8 - 25S·cm-1Range across 250 °C to 730 °C
Hall Carrier Concentration2 × 1021cm-3Measured at 730 °C
Hall Mobility0.08cm2·V-1·s-1Measured at 730 °C
Potential Window~1.5VH-terminated BNCD in PBS electrolyte vs. Ag/AgCl
Capacitance13µF/cm2Comparable to standard metallic-conduction BNCD
Optical Transmission (450 nm)55 - 75%Inversely proportional to boron content
Raman Diamond Peak1300 - 1320cm-1Broadened and downshifted (Fano + domain size)
Raman Boron-Related Band~1200 and ~500cm-1Attributed to PDOS, B dimers, or B-C modes
Comparative SCD Conductivity~103S·cm-1Heavily B-doped single crystal benchmark
Comparative PCD Conductivity~102S·cm-1Heavily B-doped polycrystalline benchmark
  1. Deposition Technique: MW-LA-PECVD utilizing a linear antenna configuration for uniform plasma distribution over large areas.
  2. Substrate Preparation: Silicon and quartz wafers used; native SiO2 layer confirmed at the interface via STEM-EDX.
  3. Gas Chemistry Optimization: Systematic variation of B/O and B/C atomic ratios to map the ternary parameter space. CO2 addition was tuned to suppress SiC formation without limiting boron incorporation.
  4. Temperature Control: Substrate stages with active temperature regulation tested from 250 °C (low-T regime) to 750 °C (high-T regime).
  5. Boron Source: Heavy boron doping achieved using trimethylborate (TMB)-type precursors in hydrogen/methane gas mixtures with CO2 additive.
  6. Structural Characterization: Cross-sectional STEM-HAADF combined with EDX mapping for B, C, O, and Si distribution analysis.
  7. Electrochemical Testing: Cyclic voltammetry in PBS electrolyte with Ag/AgCl reference electrode to determine potential window and capacitance.
  8. Optical Characterization: UV-Vis transmission spectroscopy from 300 to 800 nm to quantify transparency vs. boron content.
  9. Raman Spectroscopy: Excitation to identify diamond peak position, Fano broadening, and boron-related vibrational modes.
  10. Electrical Characterization: Four-point probe conductivity measurements and Hall effect measurements for carrier concentration and mobility.
  • Applicable Materials: For replicating or extending the electrochemical and conductive thin-film work in this study, 6CCVD’s Heavy Boron-Doped Nano-Crystalline Diamond (BNCD) is the direct match. Our polycrystalline and nanocrystalline BDD grades provide the metallic-like conduction required for electrode and sensing applications. For research requiring the highest conductivity benchmarks (approaching 103 S·cm-1), our Optical Grade Single Crystal Diamond (SCD) with heavy boron doping offers the ultimate electrochemical stability.
  • Customization Potential: The paper demonstrates 6-inch and 8-inch wafer-scale deposition. 6CCVD supports custom dimensions up to 125 mm for polycrystalline diamond (PCD) substrates and substrates up to 10 mm thick. For thin-film conductive coatings on non-diamond substrates (Si, quartz, etc.), we provide custom metallization stacks including Ti, Pt, Au, Pd, W, and Cu—critical for creating reliable ohmic contacts on BDD electrodes. Laser cutting and precision dicing are available to deliver application-ready geometries.
  • Thickness Control: Our thin-film diamond deposition covers 0.1 µm to 500 µm for both SCD and PCD, aligning with the ~300-350 nm conductive layers specified in this work and allowing easy scaling to thicker free-standing membranes.
  • Surface Finishing: For electrochemical sensor development, surface quality is critical. 6CCVD delivers Ra < 1 nm on SCD and < 5 nm on inch-size PCD, ensuring reproducible double-layer capacitance and low background currents—directly supporting the ~1.5 V potential window and 13 µF/cm2 capacitance benchmarks highlighted in this paper.
  • Engineering Support: The paper highlights the delicate balance between B/O/C ratios to avoid SiC formation while maximizing conductivity. 6CCVD’s in-house PhD engineering team can assist with material selection, doping concentration optimization, and electrode architecture design for your specific electrochemistry, biosensing, or large-area coating project. We translate peer-reviewed recipes into production-ready material specifications.
  • Call to Action: For custom specifications, metallization design, or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

Diamond is a unique semiconductor with a wide bandgap which is easily doped with boron and is acknowledged as one of the best materials for electrochemical applications. Heavily boron doped, high quality single crystal synthetic diamond can reach electrical conductivity of c.a. 103 S.cm, whereas polycrystalline material can reach c.a. 102 S.cm. However, many potential applications are restricted by the deposition temperature and limited coating area of conventional MW PECVD systems. Deposition of boron doped nano-crystalline diamond (BNCD) layers using a microwave PECVD system with linear antenna delivery (MW-LA-PECVD), enabling large area coating, was first reported in 2014. However, layers showed lower electrical conductivity in comparison to layers deposited using conventional PECVD systems. In addition, deposition of BNCD by MW-LA-PECVD is complicated by the necessity for the addition of oxygen species, which are known to limit boron incorporation and the competitive growth of silicon carbide at low CO2 concentrations. In this work, we further investigate the effect of deposition conditions on the synthesis of BNCD using the MW-LA-PECVD technique. In order to produce highly conductive BNCD, we have investigated the effect of CO2 concentration, boron to oxygen ratio and boron to carbon ratio (to well above standard values). The effect of deposition temperature was also studied (from 250 °C up to 750 °C) using temperature controlled substrate stages.