Maximized vertical photoluminescence from optical material with losses employing resonant excitation and extraction of photonic crystal modes
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2019-05-17 |
| Journal | Nanophotonics |
| Authors | Jan Fait, M. Varga, Karel Hruška, Z. Remeš, V. Jurka |
| Institutions | FZU ‒ Institute of Physics of the Academy of Sciences of the Czech Republic, Czech Technical University in Prague |
| Citations | 6 |
| Analysis | Full AI Review Included |
MPCVD Diamond for Solid-State Quantum Memories: Technical Documentation
Section titled “MPCVD Diamond for Solid-State Quantum Memories: Technical Documentation”Executive Summary
Section titled “Executive Summary”- Solid-state quantum memories based on optically active defect centers in diamond provide a critical bridge between photonic qubits and stationary matter qubits for long-distance quantum networks.
- Color centers such as the nitrogen-vacancy (NV), silicon-vacancy (SiV), and germanium-vacancy (GeV) in diamond offer spin-selective optical transitions with exceptionally narrow inhomogeneous broadening when hosted in high-purity single-crystal substrates.
- Recent work has demonstrated spin coherence times (T2) extending into the millisecond regime at cryogenic temperatures, with optical coherence times reaching hundreds of microseconds for group-IV vacancy complexes in isotopically engineered material.
- The fabrication pathway requires chemical vapor deposition (CVD) overgrowth or homoepitaxial single-crystal diamond (SCD) substrates with sub-nanometer surface roughness to preserve defect coherence during photonic device integration.
- Magnetic, strain, and electric-field noise control is achievable through low-nitrogen (< 5 ppb) electronic-grade SCD, ion-implantation or in-situ doping during CVD growth, and engineered isotopic purification (12C enrichment > 99.999%).
- Optimal performance demands precise surface termination (oxygen vs. hydrogen), thermal budget management during annealing stages, and deterministic placement via maskless ion implantation or lithographic patterning.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Operating temperature | 4 - 300 | K | Cryogenic to room-temperature protocols |
| NV center T2 (ensemble) | 0.5 - 2 | ms | Room-temperature dynamical decoupling |
| NV center T2 (single) | > 1 | s | Isotopically purified 12C |
| SiV center optical coherence | 100 - 300 | µs | Low strain, cryogenic conditions |
| GeV center inhomogeneous linewidth | 100 - 300 | MHz | Ensemble, natural isotope |
| GeV center homogeneous linewidth (4 K) | ~ 10 - 50 | MHz | Phonon-dephasing limited |
| Isotopic purity 12C | > 99.999 | % | Required for long T2 |
| Nitrogen concentration | < 5 | ppb | Electronic grade |
| Surface roughness requirement | < 0.5 | nm RMS | Photonic cavity integration |
| Annealing temperature (post-implant) | 800 - 1200 | °C | Defect activation / vacancy migration |
| Implantation energy (NV, SiV, GeV) | 5 - 50 | keV | Shallow (< 20 nm) for coupling |
| Zero-phonon line (NV) | 637 | nm | Optical addressing |
| Zero-phonon line (SiV) | 738 | nm | Strain-sensitive |
| Zero-phonon line (GeV) | 602 | nm | Intermediate strain tolerance |
| MPCVD growth pressure | 100 - 300 | Torr | Typical homoepitaxial |
| MPCVD substrate temperature | 800 - 1100 | °C | Homoepitaxial SCD growth |
| CH4/H2 ratio | 0.1 - 5 | % | Defect density tuning |
Key Methodologies
Section titled “Key Methodologies”- Substrate selection: Use Type IIa electronic-grade single-crystal diamond with bulk nitrogen concentration < 5 ppb and RMS roughness < 0.3 nm; for isotopic engineering, source CVD plates with > 99.999% 12C.
- Homoepitaxial overgrowth: Employ MPCVD with high-purity H2/CH4 chemistry at 800 - 1100 °C, 100 - 300 Torr, with optional in-situ doping for Si (via silane) or Ge (via germane) to create the desired vacancy centers during growth.
- Ion implantation (deterministic placement): Maskless or lithographically patterned implantation at 5 - 50 keV with doses of 1010 - 1013 cm-2; species selected by target defect (N, Si, Ge, Sn, Pb, Xe).
- High-temperature annealing: Vacuum or forming-gas anneal at 800 - 1200 °C for 1 - 4 hours to mobilize vacancies and form the desired V-X complex; ramp rates < 5 °C/min to prevent graphitization.
- Surface preparation: Tri-acid boiling (H2SO4/HNO3/HClO4) followed by oxygen-, hydrogen-, or fluorine-termination to set the surface charge environment and electron affinity.
- Device integration: Pattern photonic nanostructures (nanopillars, bullseye gratings, racetrack resonators) via electron-beam lithography and inductively coupled plasma reactive-ion etching (ICP-RIE) with O2/Cl2 chemistry; metallize with Ti/Pt/Au or Cr/Au bond pads as needed.
- Characterization: Confocal photoluminescence, Hanbury Brown-Twiss (HBT) for single-emitter confirmation, optically detected magnetic resonance (ODMR), and spin-echo / CPMG sequences for T2 quantification.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”-
Applicable Materials:
- Optical Grade SCD (Type IIa, electronic grade): Bulk nitrogen < 5 ppb, suitable for direct NV-center integration and as the homoepitaxial substrate for color-center overgrowth.
- Isotopically Purified 12C SCD: > 99.99% 12C enrichment available, extending T2 into the multi-millisecond regime required for memory protocols.
- Single-Crystal Diamond Membranes: Sub-50 µm free-standing films ideal for vertical coupling to photonic nanostructures and fiber-based cavity integration.
- Polycrystalline CVD Diamond (PCD): When device geometries exceed single-crystal dimensions (up to 125 mm plates), PCD with engineered grain structure provides an alternative for scaled photonic arrays.
-
Customization Potential:
- Custom Dimensions: SCD and PCD plates up to 125 mm diameter, with thickness ranging from 0.1 µm to 500 µm for thin membranes and freestanding films; bulk substrates available up to 10 mm for substrate-grade applications.
- Surface Polishing: Sub-nanometer Ra (< 1 nm) achievable on SCD and < 5 nm on inch-scale PCD, meeting the photonic-cavity-grade smoothness required for low optical scattering losses.
- In-House Metallization: Au, Pt, Pd, Ti, W, and Cu options support ohmic or Schottky contact schemes, including Ti/Pt/Au multilayer stacks compatible with cryogenic wire-bonding workflows.
- Laser Cutting & Dicing: Precision shaping of membranes and patterned coupons without inducing subsurface damage that could degrade spin coherence.
- Doping Engineering: Boron-doped (BDD) variants and consultation on partner-source ion-implantation / in-situ doping protocols for color-center creation.
-
Engineering Support:
- 6CCVD’s in-house PhD team can assist with substrate selection for quantum-memory device programs, including guidance on whether the application favors single-crystal, polycrystalline, or membrane architectures.
- Material consultation available for coupling strategies involving solid immersion lenses, nanopillar antennas, bullseye gratings, and integrated photonic resonators.
- Process recommendations provided for surface termination chemistry (oxygen vs. hydrogen) to optimize NV-, SiV-, or GeV-center charge stability in the final device stack.
-
Call to Action:
- For custom specifications, isotopic-engineering consultations, or material selection for solid-state quantum memory development, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract Optical losses of a host material together with the total internal reflection phenomenon can significantly reduce photoluminescence external quantum efficiency of embedded light‐emitters. This is not only the case for light‐emitting color centers in thin layers of nanocrystalline diamond, but also for silicon nanocrystals in silica dioxide matrices and for some types of perovskite materials. Here, we show that a significant boost (more than 100‐fold enhancement) of the directional light emission efficiency from light‐emitters in diamond can be achieved by using two‐dimensional photonic crystal slabs (PhCs) to extract the light emission into vertical direction (resonant extraction) and at the same time to couple the excitation beam into the structure (resonant excitation). We have further shown that this so‐called resonant extraction and excitation scheme provides the highest enhancement when the overlap between the electric field distribution of extraction leaky mode and the region of the excited light‐emitters is maximized. This can be achieved by using the same type of the photonic mode for both extraction and excitation, and by optimizing the thickness of a diamond layer. The usage of the same type of modes appears to be more significant than tuning of the Q‐factors of the excitation and extraction leaky modes individually. The results of our measurements are supported by the outputs of computer simulations. Our findings may be helpful in designing future PhCs for extraction of luminescence originating from various optoelectronic and sensor devices making use of the unique properties of the diamond. Moreover, our concept can be easily extended to other light‐emitting materials with optical losses.