Skip to content

A Superior Mechanical Property Nanocrystalline Diamond Film for Extremely Thin Terahertz Traveling Wave Tube Window

MetadataDetails
Publication Date2019-08-09
JournalResearch & Development in Material Science
AuthorsMing Ding
InstitutionsBeijing Vaccum Electronic Research Institute
AnalysisFull AI Review Included
  • Material Innovation: High-quality freestanding Nanocrystalline Diamond (NCD) films were grown via Microwave Plasma Chemical Vapor Deposition (MPCVD) using a relatively low CH4/H2 ratio and high substrate temperature to achieve superior mechanical strength.
  • Exceptional Mechanical Strength: The freestanding NCD films (100-260 µm thick) demonstrated an average fracture strength of ~1814 MPa, matching or surpassing the performance of UNCD films.
  • Structural Density: Cross-sectional SEM imaging confirmed that the 70 µm thick NCD consists of densely packed nano-granules (≤20 nm) from the bottom substrate interface to the top surface, ensuring excellent vacuum air-tightness.
  • Application Breakthrough: The optimized NCD process was integrated into a seven-layered 60 µm thick Microcrystalline Diamond (MCD)/NCD composite film, fabricated specifically for 850 GHz Traveling Wave Tube (TWT) windows.
  • Manufacturing Efficiency: Window components were manufactured using laser-cut MCD/NCD disks directly, bypassing the need for lapping or polishing, which is highly advantageous for preventing cracking in sub-100 µm thin diamond.
  • RF Performance: CST simulations verified that the 60 µm thick composite window achieved a bandwidth of approximately 44.2 GHz for a return loss ≤-30 dB and 71.4 GHz for a return loss ≤-20 dB.
ParameterValueUnitContext & Notes
Average Fracture Strength~1814MPaMeasured across freestanding NCD films (100-260 µm thick)
NCD Film Thickness Range100 - 260µmEvaluated for mechanical testing
Composite Window Thickness60µmSeven-layered MCD/NCD film for the 850 GHz TWT window
NCD Grain Size≤ 20nmDensely packed granules confirmed via cross-section SEM
Target Operating Frequency850GHzSub-terahertz traveling wave tube (TWT) window application
Simulated Bandwidth (≤ -30 dB)~44.2GHzReturn loss characteristic
Simulated Bandwidth (≤ -20 dB)~71.4GHzReturn loss characteristic
Operating Window Diameter71.418mmCritical TWT window disk dimension
Standard Substrate Size40mmN-type (100) silicon wafer diameter
Nucleation Density~1 x 1011/cm3Achieved via mechanical polishing with 0.3 µm diamond powder
CH4/H2 Ratio2.0 - 3.5%Relatively low ratio to minimize sp2 defects
Microwave Power (Pp)1.7 - 2.0kW2.45 GHz microwave plasma reactor
Chamber Pressure (P)17.3 - 18.6kPaHigh-pressure deposition regime
Substrate Temperature (Ts)855 - 890°CHigh temperature required for low sp2 content
Raman Diamond Peak1332cm-1Well-defined peak across all NCD films
Comparative UNCD Process1.2/6/243 (CH4/H2/Ar)sccmReference parameters for UNCD layers
Comparative UNCD Power1.5kWUsed for the 3 µm UNCD base layer
Comparative UNCD Pressure12kPaLower pressure environment for UNCD
  • Substrate Preparation: Utilized N-type (100) silicon wafers (40 mm diameter), mechanically polished with 0.3 µm diamond powder to achieve a nucleation density of ~1 x 1011 /cm3.
  • MPCVD System Setup: Operated a 6 kW, 2.45 GHz microwave plasma reactor under high-pressure conditions.
  • NCD Growth Recipe: Maintained a low CH4/H2 ratio of 2.0-3.5% to suppress re-nucleation defects.
  • Thermal Management: Sustained a high substrate temperature (Ts) of 855-890 °C to drive out non-diamond carbon phases.
  • Energy Input: Applied a microwave power (Pp) of 1.7-2.0 kW at a chamber pressure (P) of 17.3-18.6 kPa.
  • Composite Fabrication: Built a seven-layered 60 µm film by alternating MCD layers with the optimized NCD process.
  • Substrate Removal: Etched away the silicon substrate entirely, yielding freestanding NCD and composite films.
  • Component Shaping: Utilized laser cutting to manufacture the window disks directly from the thick composite film, eliminating the lapping and polishing stages.
  • Window Assembly: Integrated the disk into a housing featuring a circular-to-rectangular waveguide transition (WR0.65 standard interface).
  • Validation: Characterized structural quality using high-resolution SEM, Raman spectroscopy, and X-ray diffraction (XRD). Verified RF transmission properties using CST simulations.

This pioneering research in sub-terahertz vacuum electronics requires exceptionally thin, mechanically robust, and RF-transparent diamond membranes. 6CCVD possesses the precise MPCVD capabilities and post-processing infrastructure required to fabricate these advanced composite architectures.

  • Applicable Materials:

    • Optical Grade Nanocrystalline Diamond (NCD): Directly aligns with the paper’s core requirement. We can deposit freestanding NCD films with tightly controlled sp2 content and grain sizes (≤20 nm) necessary for >1800 MPa fracture strength.
    • Optical Grade Polycrystalline Diamond (PCD) / Microcrystalline Diamond (MCD): Essential for the robust alternating layers of the 60 µm seven-layered composite film.
    • Optical Grade Single Crystal Diamond (SCD): As highlighted by the authors, SCD is an alternative for these windows, though cost-prohibitive due to polishing and epitaxial layer separation. Our SCD plates (up to 500 µm thick) offer a viable pathway for researchers opting for single-crystal alternatives.
  • Customization Potential:

    • Ultra-Thin Membrane Fabrication: We specialize in freestanding diamond wafers and films ranging from 0.1 µm to 500 µm. For window applications, we can manufacture membranes at the specific 40-60 µm thickness range discussed in the paper, or push toward the predicted 40 µm theoretical minimum.
    • Large Format Dimensions: Our PCD plates and wafers can be scaled up to 125 mm, providing ample area for laser cutting multiple 71.418 mm diameter window disks from a single host wafer, significantly reducing material waste.
    • Integrated Metallization: For brazing the diamond window into the TWT housing (a challenge noted in the paper’s conclusion regarding brazing reliability), 6CCVD offers in-house metallization services with Au, Pt, Pd, Ti, W, and Cu. A Ti/Pt/Au stack would provide excellent hermetic sealing and brazability.
    • Laser Cutting Services: We provide precision laser cutting to deliver final disk dimensions ready for assembly, perfectly matching the paper’s strategy of bypassing traditional lapping and polishing.
  • Engineering Support:

    • The transition from 100 GHz to 850 GHz TWT windows involves managing returning loss and vacuum integrity at microscopic scales. Our in-house PhD engineering team can provide material consultation to optimize the CH4/H2 ratio, deposition pressure, and layer architecture to maximize RF transmission bandwidth and minimize internal stress for your specific TWT design.
    • Whether you are developing radar, spectroscopy, or 6G communication systems, we can tailor the polycrystalline grain boundaries to optimize dielectric loss in the THz regime.

For custom specifications, metallization stacks, or material consultation regarding your THz window or high-power vacuum electronic device, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

In the past decades, Nanocrystalline diamond (NCD) and Ultrananocrystalline diamond (UNCD) films have been exploited intensively due to their wide variety of applications in several areas, such as heat spreading, tribology, biology, micro/nano-technology