Ultra-long coherence times amongst room-temperature solid-state spins
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2019-08-28 |
| Journal | Nature Communications |
| Authors | Ernst David Herbschleb, Hiromitsu Kato, Yukie Maruyama, Takuya Danjo, Toshiharu Makino |
| Institutions | National Institute of Advanced Industrial Science and Technology, Kyoto University Institute for Chemical Research |
| Citations | 313 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Record-Breaking Coherence: Achieves the longest inhomogeneous spin-dephasing time T2 ≈ 1.54 ms* and Hahn-echo spin-coherence time T2 ≈ 2.43 ms for any solid-state electron spin at room temperature.
- Novel Material Strategy: Uses phosphorus-doped (n-type) 12C-enriched single-crystal diamond (99.998% isotopic purity) to suppress paramagnetic vacancy complexes via Coulomb repulsion during CVD growth.
- Optimal Doping Window: Identifies [P] = 6 × 1016 atoms cm-3 as the sweet spot balancing NV- state stabilization against phosphorus-induced magnetic noise (average T2 = 1.8 ms across 21 NV centers).
- Best-in-Class Sensitivity: Delivers single-NV AC magnetic field sensitivity of η = 9.1 ± 0.3 nT Hz-1/2, improving prior best by nearly 2× through superior Rabi contrast and photon counts.
- Decoherence Source Identification: Noise spectroscopy and single/double quantum T1 measurements pinpoint residual paramagnetic impurities (npara ≈ 3 × 1017 cm-3) as the limiting factor, with magnetic noise dominating over electric-field noise.
- Quantum-Grade Diamond Advancement: Demonstrates that further T2 extension requires reducing paramagnetic defects and optimizing phosphorus concentration, opening a synthesis pathway for next-generation quantum devices.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| T2* (inhomogeneous dephasing) | 1.54 (+1.91 / -0.50) | ms | Longest recorded for solid-state electron spin at room temperature |
| T2 (Hahn-echo coherence) | 2.43 (+0.06 / -0.06) | ms | Longest recorded for solid-state electron spin at room temperature |
| T2,dd (CPMG, 512 π-pulses) | 3.3 | ms | Dynamical decoupling limit |
| T1SQ (longitudinal relaxation) | 7.4 | ms | Single-quantum measurement |
| T1DQ | 3.4 | ms | Double-quantum measurement |
| AC Magnetic Sensitivity (η) | 9.1 ± 0.3 | nT Hz-1/2 | Best single-NV room-temperature sensor |
| DC Magnetic Sensitivity | ~6 | nT Hz-1/2 | Derived from T2* |
| Optimal AC Frequency | ~833 | Hz | Corresponding τoptimum ≈ 1.2 ms |
| Phosphorus Concentration (optimal) | 6 × 1016 | atoms cm-3 | Sample C |
| Phosphorus Concentration Range | 3 × 1015 - 1 × 1017 | atoms cm-3 | Samples A-H |
| 12C Enrichment | 99.998 | % | Reduces nuclear spin bath |
| Residual 13C | 0.002 | % | ~0.002% natural abundance |
| Phosphorus Donor Level | 570 | meV | Activation energy |
| Electron Mobility (300 K) | ~800 | cm2 V-1 s-1 | Hall-effect measurement |
| npara (paramagnetic impurities) | ~3 × 1017 | cm-3 | Extracted from noise spectrum |
| Coupling Strength (Δ) | ≥ 0.1 | MHz | Average NV-bath coupling |
| External Magnetic Field | 1.8 | mT | Applied during experiments |
| Rabi Contrast | 37 | % | High contrast enables better sensitivity |
| Ω (ms = 0 ↔ ±1 relaxation rate) | ~45 | s-1 | Magnetic noise contribution |
| γ (ms = -1 ↔ +1 relaxation rate) | ~1.2 × 102 | s-1 | Electric noise contribution |
| Growth Pressure | 150 | Torr | MPCVD chamber |
| MW Power | 3600 | W | Magnetron generator |
| Substrate | Ib-type (111) diamond | — | Epitaxial growth template |
Key Methodologies
Section titled “Key Methodologies”- Epitaxial CVD Growth: Phosphorus-doped n-type diamond films grown on Ib-type (111)-oriented substrates via microwave plasma-enhanced CVD in a 5-kW magnetron reactor with load-lock system.
- Isotopic Enrichment: 12C-enriched methane (99.998%) purified by zirconium absorber to minimize 13C nuclear spin bath.
- Phosphorus Doping Control: PH3/H2 dilution ratio (1000 ppm) with PH3/CH4 varied from 12.5 to 2000 ppm to achieve target concentrations.
- Gas Chemistry: CH4/H2 ratio held constant at 0.4%; total gas flow 1000 sccm; base pressure < 2 × 10-8 Torr.
- Film Thickness: Tens of micrometres per epitaxial layer.
- Characterization: Secondary ion mass spectrometry (SIMS) for P incorporation; Hall-effect with Van-der-Pauw contacts for mobility/conductivity.
- NV Center Readout: Home-built confocal microscope with single-shot charge-state measurements; MW pulses via thin copper wire; magnetic field via near-sample coil.
- Pulse Sequences: Free-induction decay (FID), Hahn-echo, and Carr-Purcell-Meiboom-Gill (CPMG) dynamical decoupling for coherence time extraction.
- Noise Spectroscopy: Multi-pulse CPMG sequences to extract Lorentzian noise spectrum and identify decoherence sources.
- Sensitivity Measurement: AC magnetic field via synchronized sinusoidal field in Hahn-echo; 100,000 iterations for gradient calibration; 100 repetitions for σ1 uncertainty extraction.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”- Applicable Materials: This research demands Isotopically Enriched Optical-Grade Single-Crystal Diamond (SCD) with 12C > 99.99%, available through 6CCVD’s custom MPCVD growth services. Phosphorus doping at the critical 6 × 1016 atoms cm-3 level requires precise gas-flow control and PH3 handling expertise—6CCVD’s MPCVD platform is engineered for such ultra-light doping regimes.
- Customization Potential: The paper specifies Ib-type (111)-oriented substrates and epitaxial layers with thicknesses “in the order of tens of micrometres.” 6CCVD can supply custom-oriented SCD substrates up to 10 mm thick and epitaxial SCD films from 0.1 µm to 500 µm, enabling exact replication of the layer architectures used here. For researchers building full quantum device stacks, 6CCVD offers in-house metallization (Ti/Pt/Au or other schemes) compatible with Van-der-Pauw Hall-effect contact configurations.
- Surface Engineering for Shallow NVs: The paper references work on shallow NV engineering via sacrificial boron-doped p-type layers. 6CCVD supplies Heavy Boron-Doped PCD (BDD) for such sacrificial layers, with precise thickness control and post-growth etching compatibility.
- Diamond Characterization Support: 6CCVD’s in-house PhD team can assist with material selection—matching phosphorus donor concentration, 12C enrichment level, and crystal orientation—to specific quantum sensing or spintronics project requirements.
- Wafer-Scale & Custom Geometries: For groups scaling up NV-center arrays or diamond quantum device production, 6CCVD offers plates and wafers up to 125 mm (PCD) with laser-cutting services for custom chip dimensions.
- Polishing for Optical Readout: The Rabi contrast and photon count improvements cited here depend critically on surface quality. 6CCVD delivers SCD with Ra < 1 nm polish, maximizing NV fluorescence yield and reducing optical decoherence pathways.
Call to Action: For custom specifications, phosphorus-doping consultation, or material selection for quantum-grade diamond projects, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract Solid-state single spins are promising resources for quantum sensing, quantum-information processing and quantum networks, because they are compatible with scalable quantum-device engineering. However, the extension of their coherence times proves challenging. Although enrichment of the spin-zero 12 C and 28 Si isotopes drastically reduces spin-bath decoherence in diamond and silicon, the solid-state environment provides deleterious interactions between the electron spin and the remaining spins of its surrounding. Here we demonstrate, contrary to widespread belief, that an impurity-doped (phosphorus) n-type single-crystal diamond realises remarkably long spin-coherence times. Single electron spins show the longest inhomogeneous spin-dephasing time ( $$T_2^ \ast \approx 1.5$$ T 2 * ≈ 1.5 ms) and Hahn-echo spin-coherence time ( T 2 ≈ 2.4 ms) ever observed in room-temperature solid-state systems, leading to the best sensitivities. The extension of coherence times in diamond semiconductor may allow for new applications in quantum technology.