Nitrogen centers in single crystal diamond grown by chemical vapor deposition
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2023-05-24 |
| Journal | Journal of Vacuum Science & Technology A Vacuum Surfaces and Films |
| Authors | D.S. Misra |
| Citations | 4 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Subject: Spectroscopic analysis of nitrogen-related defect centers in two grades of MPCVD-grown single crystal diamond (SCD), correlating nitrogen concentration with optical and fluorescent behavior.
- Application Focus: Understanding defect formation is critical for high-performance applications including particle detectors, high-pressure anvils, laser windows, and gem-grade stones.
- Method: Single crystal diamond plates were grown using an MPCVD reactor on HPHT Type Ib substrates (5 × 5 × 0.5 mm³), with controlled nitrogen (N₂) doping in the gas phase.
- Key Finding: A strong linear correlation (R² = 0.9414) exists between the concentrations of N⁺s and (NVH)⁰ centers, both nitrogen-hydrogen-vacancy complexes that dictate color and fluorescence properties.
- Material Classes Identified: Light (white) low-nitrogen plates (< 50 ppb) versus dark brown high-nitrogen plates (up to 5 ppm) directly tie defect density to optical grade suitability.
- Critical Threshold: Nitrogen concentration below 1 ppb is required for particle detector, anvil, and laser window applications.
- Value for Engineering: Demonstrates that precise control of CVD growth parameters (CH₄%, N₂ ppm, temperature) is essential for tailoring diamond properties to specific quantum, photonic, or industrial uses.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context / Notes |
|---|---|---|---|
| Substrate Material | HPHT Type Ib | — | Seed for homoepitaxial CVD growth |
| Substrate Dimensions | 5 × 5 × 0.5 | mm³ | Small-area seed crystal |
| Deposition Pressure | 145 | mbar | Monitored via capacitance manometer |
| Substrate Temperature | 900-950 | °C | Measured with two-color pyrometer |
| CH₄ Percentage in Gas | 9.4 | % | High methane concentration for growth rate |
| N₂ Concentration Range | 100-500 | ppm | Varied to control nitrogen incorporation |
| Total N Concentration (Light Plates) | ~50 | ppb | Measured error: ±30 ppb |
| Total N Concentration (Dark Brown Plates) | Up to 5 | ppm | Measured error: ±30 ppb |
| CH₄ Gas Purity | 6N (99.9999%) | — | Source gas specification |
| H₂ Gas Purity | 7N (99.99999%) | — | Source gas specification |
| PL Emission Band | ~700 | nm | Fluorescence band in dark brown SCD |
| FTIR Peak — N⁺s Center | 1332 | cm⁻¹ | FTIR detection signature |
| FTIR Peak — (NVH)⁰ Center | 3123 | cm⁻¹ | FTIR detection signature |
| FTIR — C-H Stretch Bands | 2800-3000 | cm⁻¹ | Hydrogen-related absorption |
| Correlation (N⁺s vs. (NVH)⁰) | R² = 0.9414 | — | Strong positive linear relationship |
| Multivacancy Formation Threshold | >1400 | °C | A/B centers appear only above this |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: HPHT Type Ib diamond substrates (5 × 5 × 0.5 mm³) selected as seeds for homoepitaxial MPCVD growth.
- Reactor Configuration: Custom-built MPCVD chamber; gas purity maintained at 6N for CH₄ and 7N for H₂.
- Pressure Control: Chamber pressure held constant at 145 mbar throughout deposition, monitored via capacitance manometer.
- Temperature Monitoring: Substrate surface temperature maintained between 900-950 °C using a two-color pyrometer to avoid multivacancy defect formation.
- Gas Phase Composition: Fixed CH₄ ratio at 9.4% in H₂ carrier; N₂ concentration varied between 100 and 500 ppm to engineer nitrogen incorporation.
- Post-Growth Processing: Grown diamond blocks sectioned into plates with polycrystalline rim material removed.
- Sample Classification: Plates sorted into light (white, low N) and dark brown (high N) categories based on visual color and PL fluorescence at ~700 nm.
- Spectroscopic Characterization: UV-Vis for N⁰s (270 nm), PL for NV centers, and FTIR for N⁺s (1332 cm⁻¹) and (NVH)⁰ (3123 cm⁻¹) quantification.
- Correlation Analysis: Quantitative comparison of defect center concentrations across sample sets to establish the N⁺s — (NVH)⁰ relationship.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”The research demonstrates a fundamental need for ultra-low nitrogen Single Crystal Diamond (SCD) when targeting particle detection, laser window, and high-pressure anvil applications, alongside precisely nitrogen-tuned SCD for gemological and photonic uses.
| Application | Required Nitrogen Level | 6CCVD Solution |
|---|---|---|
| Particle Detectors | < 1 ppb | Optical Grade SCD (Type IIa, < 5 ppm standard; custom ultra-pure variants available) |
| Laser Windows / Anvils | < 1 ppb | High-Purity Optical SCD, custom-grown with controlled CH₄ and N₂-free conditions |
| Gem / Color-Center Research | 0.1-5 ppm (tunable) | Custom Nitrogen-Doped SCD, with full FTIR and PL characterization support |
Customization Potential
Section titled “Customization Potential”The paper emphasizes that specific N₂ gas concentration and substrate temperature windows directly govern defect density — parameters that demand specialized synthesis knowledge. 6CCVD delivers this flexibility through:
- Custom Geometry: Plates and wafers up to 125 mm for polycrystalline diamond (PCD), with laser cutting available for non-standard shapes to support both research and scaled production.
- Thickness Control: SCD and PCD thin films from 0.1 µm to 500 µm; substrates up to 10 mm.
- Material Variants: Single Crystal (SCD), Polycrystalline (PCD), and Heavy Boron-Doped (BDD) diamond for complementary electrochemical or conductive applications.
- Metallization Integration: In-house deposition of Au, Pt, Pd, Ti, W, and Cu for seamless integration into device fabrication, reducing handling risk on pristine CVD diamond surfaces.
- Surface Finishing: SCD polished to Ra < 1 nm and inch-size PCD to Ra < 5 nm, essential for minimizing optical scatter and ensuring clean spectral baselines in FTIR and PL measurements.
Engineering Support
Section titled “Engineering Support”The paper’s central conclusion — that (NVH)⁰ and N⁺s concentrations correlate linearly with growth parameters — highlights the importance of vendor expertise in fine-tuning CVD recipes. 6CCVD’s in-house PhD engineering team can assist with:
- Material Selection: Matching nitrogen specification (sub-ppb vs. controlled ppm) to your specific application — whether quantum sensing, radiation detection, or optical components.
- Recipe Design: Collaborative work to replicate or extend published growth conditions, including substrate geometry, gas chemistry, and post-processing protocols.
- Defect Analysis Guidance: Recommendations on spectroscopic characterization methods (FTIR, PL, UV-Vis) appropriate for your target defect center.
Logistics: Global shipping with DDU as default and DDP available on request, ensuring reliable delivery for time-sensitive research programs.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
The single crystals of diamond grown by chemical vapor deposition (CVD) are getting wider acceptance in the market for gem purposes and various other applications. Most popular applications are gems, particle detectors, high pressure anvils, and laser windows. It is widely accepted that, unless specifically made, the CVD diamond single crystals are type IIa, which implies that they have a nitrogen concentration of less than 5 ppm in the diamond. The concentration of nitrogen in CVD grown single crystal diamond is a serious deterrent for certain applications such as particle detectors, high pressure anvils, and laser windows. The threshold of nitrogen for these specific applications is subparts per billion (less than 1 ppb). On the other hand, the CVD single crystal diamonds for gems could hold nitrogen in subparts per million (less than 1 ppm) range and would still qualify as excellent gems. In this paper, an attempt is made to understand the nature of nitrogen in two types of CVD single crystal diamonds: one that shows very week fluorescence in the PL spectrum (light color or white color) with low nitrogen concentration and the other with high nitrogen concentration that shows strong fluorescence in the PL spectrum (brown to dark brown color). The correlation of nitrogen in different forms of vacancy centers in these two types of single crystals of CVD diamonds is studied. The results indicate that a strong relationship exists in concentrations of the (NVH)0 and NS+ centers in brown and dark brown color CVD grown single crystal diamonds.
Tech Support
Section titled “Tech Support”Original Source
Section titled “Original Source”References
Section titled “References”- 2001 - Optical Properties of Diamonds a Data Handbook [Crossref]