Skip to content

Electroreduction of carbon dioxide using platinum-iridium modified boron-doped diamond (BDD) with various platinum-iridium ratios

MetadataDetails
Publication Date2020-02-01
JournalIOP Conference Series Materials Science and Engineering
AuthorsMillati H. Saprudin, Shafrizal Rasyid Atriardi, Jarnuzi Gunlazuardi, Yasuaki Einaga, Tribidasari A. Ivandini
InstitutionsUniversity of Indonesia, Keio University
Citations5
AnalysisFull AI Review Included
  • Objective: Evaluate the performance of Boron-Doped Diamond (BDD) electrodes modified with bimetallic Platinum-Iridium (Pt-Ir) catalysts for the electrochemical reduction of CO2 in aqueous media.
  • Fabrication Method: Hybrid approach combining wet chemical seeding followed by electrochemical deposition to anchor Pt-Ir nanoparticles onto the BDD surface.
  • Catalyst Ratios Investigated: Three precursor ratios were tested — Pt-Ir (1:1), Pt-Ir (1:2), and Pt-Ir (2:1) — to optimize dispersion and electrochemical response.
  • Electrolyte System: 0.1 M NaCl aqueous solution, chosen for its relevance to seawater-like matrices and its non-interfering ionic conductivity.
  • Potential Window: Reduction studies performed at -1.1 V, -1.2 V, -1.3 V, and -1.5 V (vs Ag/AgCl) over a 60-minute electrolysis window.
  • Key Result: Pt-Ir (2:1)-BDD at -1.1 V (vs Ag/AgCl) produced formic acid, methanol, and hydrogen as the primary products with the most favorable efficiency.
  • Stability Concern: Post-electrolysis XPS analysis revealed significant mass loss of deposited particles (Pt loss up to 56.68%, Ir loss up to 100%), indicating limited electrode reusability and a need for more robust anchoring strategies.
ParameterValueUnitContext
Substrate MaterialBoron-Doped Diamond (BDD)—Working electrode base
Catalyst SystemBimetallic Pt-Ir—Nanoparticles deposited on BDD
Pt-Ir Ratios Tested1:1, 1:2, 2:1mol ratioPrecursor ratio in deposition bath
Deposition MethodWet chemical seeding + electrodeposition—Hybrid fabrication
Electrolyte0.1 M NaClMAqueous CO2-saturated medium
Applied Potentials-1.1, -1.2, -1.3, -1.5V (vs Ag/AgCl)Electroreduction driving force
Electrolysis Duration60minPer experiment
Main Products DetectedFormic acid, methanol, H2—At PtIr(2:1)-BDD, -1.1 V
Pt Mass (2:1) Before/After4.42 / 3.84%13.12% mass loss
Ir Mass (2:1) Before/After0.41 / 0.39%4.88% mass loss
Pt Mass (1:1) Loss56.68%Significant detachment
Ir Mass (1:1) Loss100.00%Complete Ir depletion
Working Potential Window (BDD)~+2.0 to -1.6V (vs Ag/AgCl)Inferred from cyclic voltammogram
Particle AggregationObserved at higher Ir ratios—SEM characterization
  1. Substrate Preparation: BDD electrodes prepared via Microwave Plasma Chemical Vapor Deposition (MPCVD) to ensure high sp3 content, wide potential window, and low capacitive background.
  2. Wet Chemical Seeding: BDD surfaces pre-treated with seeding solution to create nucleation sites for subsequent metal deposition.
  3. Electrochemical Deposition: Pt and Ir co-deposited onto seeded BDD at controlled precursor stoichiometries (1:1, 1:2, 2:1).
  4. Surface Characterization: Electrode morphology and composition verified via Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS), confirming Pt 4f and Ir 4f binding energy signatures.
  5. Electrochemical Profiling: Cyclic voltammetry (CV) performed to confirm wide working window and enhanced electroactive surface area post-modification.
  6. CO2 Electroreduction: Electrolysis conducted in CO2-saturated 0.1 M NaCl at four discrete potentials (-1.1 V to -1.5 V vs Ag/AgCl) for 60 minutes.
  7. Product Analysis: Liquid products (formic acid, methanol) quantified via chromatographic or spectroscopic methods; gaseous H2 quantified accordingly.
  8. Stability Assessment: XPS repeated post-electrolysis to quantify residual Pt and Ir mass percentages and calculate catalyst loss.

Applicable Materials

This research demands a high-quality Boron-Doped Diamond electrode with a wide electrochemical potential window, low background current, and excellent chemical inertness — properties intrinsic to MPCVD-grown BDD. 6CCVD provides Heavy Boron-Doped PCD (Polycrystalline Diamond) substrates ideally suited for electrocatalytic platforms. For researchers requiring single-crystal precision or epitaxial smoothness, our Optical Grade SCD with controlled boron incorporation can also be specified. Both are manufactured in-house via MPCVD, ensuring the sp3 phase purity and grain-boundary control that this study implicitly requires.

Customization Potential

The paper’s primary limitation — catalyst particle detachment during electrolysis (up to 100% Ir loss at 1:1 ratio) — highlights a critical need for improved adhesion strategies. 6CCVD addresses this with:

  • Custom Metalization Services: Internal Ti, W, Cr, and Pt seed layers can be sputtered or evaporated onto BDD prior to catalyst deposition, dramatically improving mechanical anchoring and electrical contact. A Ti/Pt underlayer is a common route for noble-metal catalyst adhesion.
  • Laser Cutting & Shaping: Electrodes can be diced to precise geometries (down to sub-mm features) to fit custom flow-cell or H-cell architectures without introducing micro-cracks that compromise the diamond matrix.
  • Dimensional Flexibility: Plates and wafers up to 125 mm (PCD) and thickness ranges from 0.1 µm to 500 µm (SCD/PCD) or up to 10 mm for substrates, enabling both lab-scale screening and scaled reactor prototyping.
  • Surface Finishing: Polishing to Ra < 5 nm on polycrystalline substrates ensures reproducible catalyst loading and uniform current distribution — both critical for the Faradaic efficiency comparisons made in this work.

Engineering Support

6CCVD’s in-house PhD team specializes in matching diamond morphology (SCD vs PCD), doping concentration, and surface termination to specific electrochemical applications. For projects in CO2 electroreduction, water electrolysis, or electrochemical sensor development, our engineers can recommend optimal boron-doping levels, crystal grain size, and metalization stacks to extend the operational lifetime of modified electrodes — directly addressing the catalyst-loss bottleneck identified in this paper.

Call to Action

For custom specifications, metalization consultations, or material selection guidance for your next electrocatalysis or CO2 reduction project, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Abstract Modification of boron-doped diamond (BDD) electrodes with bimetallic platinum-iridium was studied. Combination techniques of wet chemical seeding and electrochemical deposition were performed with various Pt-Ir precursor ratios of (1:1), (1:2) and (2:1). These electrodes were then applied for electrochemical reduction of CO 2 dissolved in 0.1 M NaCl solution at the potentials of -1.1 V, -1.2 V, -1.3 V, and -1.5 V (vs Ag/AgCl) for 60 min. Electroreduction of CO 2 applied at PtIr(2:1)-BDD at the potential of -1.1 V (vs Ag/AgCl) produced formic acid, methanol and hydrogen as the main products.