Raman spectroscopy for studying the synthesis of conducting BC3 hetero-diamonds in diamond anvil cell under high temperature
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2020-05-01 |
| Journal | Journal of Physics Conference Series |
| Authors | A. A. Bykov, Pavel V. Zinin, Kamil M. Bulatov, В. П. Филоненко, Igor B. Kutuza |
| Institutions | Moscow Power Engineering Institute, Federal State Budgetary Institution of Science “Scientific and Technological Center of Unique Instrumentation” of the Russian Academy of Sciences |
| Citations | 1 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Novel Phase Discovery: Direct transformation of a sintered graphite-like BC3 (g-BC3) phase into a diamond-like BC3 (d-BC3) phase, achieved inside a diamond anvil cell (DAC) at extreme conditions of 2500 K and 22 GPa.
- Material Composition: The quenched specimen is identified as a mixture of graphite and heavily boron-doped hetero-diamond, supporting research into high-temperature superconductivity and metallic conductivity in boron-carbon systems.
- Synthesis Method: Starting material is a powder compact of nanodiamonds (0.1 µm) mixed with 25% boron microparticles (0.1-0.3 µm), sintered initially at 6.0 GPa and 1200 °C before the high-pressure laser heating.
- Advanced Diagnostic Technique: Heating performed with a 1064 nm CW fiber laser (23 W output) utilizing a π-shaper for flat-top beam profiling, monitored by a tandem acousto-optical tunable filter (TAOTF) synchronized with a high-speed camera to map 2D temperature distribution.
- Key Raman Signatures: Phase transformation confirmed by characteristic Raman shifts at 417 cm-1, 970 cm-1, 1215 cm-1, and a sharp 1324 cm-1 peak indicating high boron concentration within the diamond lattice.
- Future Outlook: The research aims to investigate conductivity via conductive atomic force microscopy (c-AFM), linking this heavily doped diamond phase to potential superconducting applications.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Max Laser Heating Temperature | 2500 | K | Peak temperature achieved at the center of the laser spot during DAC synthesis |
| Synthesis Pressure | 22 | GPa | Pressure applied within the Diamond Anvil Cell during laser heating |
| Initial Sintering Pressure | 6.0 | GPa | Pressure used to create the starting g-BC3 compact |
| Initial Sintering Temperature | 1200 | °C | Temperature applied to sinter the nanodiamond/boron mixture |
| Heating Laser Wavelength | 1064 | nm | Continuous Wave (CW) Ytterbium fiber laser |
| Heating Laser Power | 23 | W | Power applied to the specimen during the 5-minute heating phase |
| Sintering Exposure Time | 150 | s | Duration of the initial high-pressure sintering step |
| Laser Heating Duration | 5 | minutes | Total time the sample was held at peak conditions |
| Heated Area Diameter | ~15 | µm | Diameter of the laser spot on the sample surface |
| Raman Excitation (Material) | 532 | nm | Stabilized diode CW laser used for post-synthesis analysis |
| Raman Excitation Power | 150 | µW | Power used to probe the quenched sample without burning |
| Raman Detector Exposure | 60 | s | Integration time for the Raman scattering measurement |
| Primary Diamond Peak | 1324 | cm-1 | Sharp peak indicating diamond lattice with high boron concentration |
| Graphite (G-band) Peak | 1612 | cm-1 | Broad band indicating the presence of a graphitic phase |
| Disordered Carbon (D-band) | 1346 | cm-1 | Peak characteristic for disordered graphite in the starting material |
| B-B Dimer Stretching Mode | 417 | cm-1 | Broad peak attributed to Raman active stretching modes of B-B dimers |
| Boron-Rich Hetero-Diamond Peak | 970 | cm-1 | Peak often detected in boron-rich hetero-diamond lattices |
| Insulating Medium | NaCl | N/A | Medium used in the gasket to insulate the sample during compression |
| Starting Boron Concentration | 25 | % | Weight/Volume percentage of boron microparticles in the initial powder mix |
Key Methodologies
Section titled “Key Methodologies”- Starting Material Preparation: Mixed nanodiamond powder (0.1 µm) with 25% boron microparticles (0.1-0.3 µm).
- Initial Sintering: Compressed the powder mixture to 6.0 GPa and heated to 1200 °C for 150 seconds to form the graphite-like BC3 (g-BC3) precursor.
- Sample Loading: Placed the sintered specimen into a steel gasket within the DAC, using NaCl as an insulating medium.
- High-Pressure Compression: Compressed the DAC assembly to a working pressure of 22 GPa.
- Laser Heating Setup: Deployed a 1064 nm CW fiber laser (23 W) equipped with a π-shaper to ensure a flat-top beam profile for uniform heating.
- Thermal Monitoring: Utilized a tandem acousto-optical tunable filter (TAOTF) and a high-speed camera (309 fps) to capture the 2D spatial temperature distribution in real-time.
- Phase Transformation: Held the sample at 2500 K and 22 GPa for 5 minutes, then quenched the specimen to room conditions.
- Material Characterization: Analyzed the crystal structure using a Huber G670 imaging-plate Guinier camera (Cu Kα1 radiation, λ = 1.5405981 Å).
- Microstructural Analysis: Examined the morphology and elemental composition via FEI Helios NanoLab 660 SEM equipped with an EDAX microanalysis system.
- Spectroscopic Verification: Collected Raman spectra at room temperature using a TriVista 555 triple grating spectrometer with a liquid-nitrogen-cooled CCD, excited by a 488 nm Ar+ ion laser at 0.5 µW to prevent overheating.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Advancing research into heavily boron-doped hetero-diamonds (d-BC3) and superconducting materials requires exceptional precision in Chemical Vapor Deposition (CVD) and material processing. 6CCVD provides the foundational building blocks for your extreme-pressure and high-temperature investigations.
-
Applicable Materials:
- For replicating or extending the heavily boron-doped diamond lattices discussed in this research, Heavy Boron-Doped PCD (Polycrystalline Diamond) from 6CCVD is the ideal starting substrate.
- If your research requires highly ordered crystalline structures to isolate specific superconducting properties, our Optical Grade SCD (Single Crystal Diamond) can be custom-doped to achieve the necessary carrier concentrations.
- Our BDD (Boron-Doped Diamond) electrodes and wafers provide a highly conductive, chemically inert platform perfectly suited for conductive atomic force microscopy (c-AFM) follow-up studies.
-
Customization Potential:
- The extreme pressures and localized laser heating utilized in this paper demand exceptionally uniform and defect-free diamond anvils. 6CCVD manufactures Custom SCD plates and wafers up to 125mm, ensuring you have large-area, ultra-flat surfaces for your DAC experiments.
- We offer extensive Custom Thickness ranges for both SCD and PCD (0.1 µm - 500 µm), allowing you to tailor the thermal conductivity and structural integrity of your diamond anvils or substrates.
- For integrating these doped diamonds into complex measurement systems or electrical testbeds, 6CCVD provides Custom Metalization (Au, Pt, Pd, Ti, W, Cu) and precision laser cutting to match your exact experimental geometries.
-
Engineering Support:
- Navigating the complexities of boron-carbon phase transitions and superconductivity requires a partner who understands the material at a fundamental level. Our in-house PhD engineering team can collaborate with you on material selection, doping concentrations, and metallization schemes tailored for specific high-pressure physics applications.
For custom specifications, high-pressure material consultation, or to discuss your experimental geometry, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract A direct transformation of the sintered BC 3 phase to a novel diamond-like d -BC 3 phase was observed in a diamond anvil cell (DAC) at high temperature, 2500 K and high pressure, 22 GPa. For heating a specimen in a DAC a laser heating (LH) system combined with an acousto-optical filter and synchronized with a video camera was used. Combining the LH system with the acousto-optical filter allows measurement of the temperature distribution under infrared (1064 nm) LH of a specimen under high pressure in a DAC. The starting material with a composition BC 3 was obtained by sintering a powder of nanodiamonds with a powder of boron microparticles at 6.0 GPa during 150 s heating at 1200 °C. The quenched BC 3 specimen was studied by the Raman spectroscopy.