Polycrystalline diamond CVD-synthesis on modified silicon substrates from methane-hydrogen plasma
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2020-09-01 |
| Journal | IOP Conference Series Materials Science and Engineering |
| Authors | A L Maslov, N. I. Polushin, А. I. Laptev, E. A. Vysotina, T. V. Martynova |
| Institutions | National University of Science and Technology |
| Analysis | Full AI Review Included |
Polycrystalline Diamond CVD Synthesis on Modified Silicon Substrates: Technical Analysis
Section titled “Polycrystalline Diamond CVD Synthesis on Modified Silicon Substrates: Technical Analysis”Executive Summary
Section titled “Executive Summary”- Objective: Synthesis of high-quality polycrystalline diamond (PCD) CVD films on modified silicon substrates targeting optical window and electrode applications.
- Substrate Strategy: Si (111) wafers (Ø 25 mm) pre-seeded with nanodispersed diamond (4-6 nm primary particles; 15-20 nm colloidal aggregates) to maximize nucleation density.
- Reactor Platform: Ardis 300 MPCVD system operated at 3800 W microwave power, 20 kPa chamber pressure, and substrate temperature of 1100 °C.
- Film Architecture: Columnar crystallite morphology with average grain size of 1.5 µm, grown to 500 µm thickness.
- Gas Phase Engineering: CH4/H2 ratio tuned to produce three optical grades: light-gray, gray, and dark-gray films.
- Target Applications: Optical windows (micron-scale crystallite regime) and electrochemical electrodes.
- Scale-Up Pathway: The work explicitly addresses extending deposition footprint without compromising film quality — a direct challenge to commercial MPCVD foundries.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Substrate Diameter | 25 | mm | Silicon (111) wafer |
| Substrate Thickness | 2.5 - 3.0 | mm | Polished, modified |
| Microwave Power | 3800 | W | Ardis 300 reactor |
| Chamber Pressure | 20 | kPa | Process baseline |
| Substrate Temperature | 1100 | °C | Growth interface |
| Methane Purity | 99.5 | % | Process gas |
| Hydrogen Purity | 99.9999 | % | Carrier / etchant gas |
| Film Thickness | 500 | µm | Final deposited layer |
| Crystallite Size (avg.) | 1.5 | µm | Columnar morphology |
| Nanodiamond Seed Size | 4 - 6 | nm | Primary particle TEM |
| Seed Aggregate Size | 15 - 20 | nm | Ethanol colloid |
| Morphology | Columnar | — | Competitive grain growth |
| Optical Variants | 3 | grades | Light, gray, dark-gray |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: Si (111) wafers polished to optical finish and seeded with nanodispersed diamond colloid (Diamond Center, St. Petersburg) via established seeding protocols.
- Nanodiamond Characterization: Primary particle size and crystallinity verified by TEM (JEOL JEM-2100) and selected-area electron diffraction (SAED).
- Colloid Dispersion: Aggregate size controlled to 15-20 nm using high-intensity cavitation processing hardware (NUST MISIS).
- MPCVD Deposition: Ardis 300 reactor loaded with seeded substrates; evacuated and process gas introduced.
- Process Recipe Baseline:
- H2 flow (carrier) — high-purity
- CH4 flow — modulated to produce three optical grades
- Pressure: 20 kPa
- MW power: 3800 W
- Substrate temp: 1100 °C
- Growth Duration: Tuned to yield 500 µm-thick freestanding-grade PCD films.
- Post-Growth Analysis: Surface morphology imaged to confirm columnar 1.5 µm crystallites and competitive-growth texture.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”-
Applicable Materials:
- Optical-Grade Free-Standing PCD (up to 125 mm diameter, 0.1-500 µm thickness) directly corresponds to the columnar, 500 µm-thick films demonstrated in this work — suitable for the optical-window target application.
- Heavy Boron-Doped PCD (BDD) for the electrode pathway cited by the authors (Ref. [18] of the paper addresses electrochemical use).
- Optical-Grade SCD (Ra < 1 nm) is recommended when next-stage research demands reduced grain-boundary scattering beyond the 1.5 µm polycrystalline regime.
-
Customization Potential:
- The paper’s three gas-phase variants (light-gray, gray, dark-gray) reflect different sp2/sp3 ratios and grain-boundary densities. 6CCVD can deliver tuned polycrystalline grades across a controlled optical-density range, with in-house metalization (Ti / W / Cr adhesion; Au / Pt / Pd electrode caps; Cu heat-spreader layers) to enable direct integration into electrode or window-mount assemblies.
- Need larger substrates to extend beyond the 25 mm Si demonstration wafer? 6CCVD supplies PCD plates and wafers up to 125 mm diameter, addressing the exact scale-up bottleneck the authors identify for optical-window deployment.
- Laser cutting and custom edge profiling are available to convert free-standing PCD into application-specific form factors (rectangular windows, framed electrode disks, mesa structures).
-
Engineering Support:
- The authors’ core challenge — high nucleation density, controlled crystallite size, and methane-ratio tuning — maps directly to 6CCVD’s recipe-development workflow. Our in-house PhD engineering team supports material selection, seeding strategy review, and metal-stack design for diamond-on-silicon, diamond-on-Mo, and diamond-on-Cu heterogeneous integration projects targeting photonics, MEMS, and electrochemistry.
-
Call to Action:
- For custom specifications, large-area PCD, doped variants, or metalization consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract The widespread use of diamond in electronics, photonics and other fields of science and technology is currently constrained by the possibility of obtaining high-quality material - polycrystalline diamond CVD-films on silicon, molybdenum, copper and other materials, as well as a small deposition area. Substrates special pretreatment will allow solving both problems. This paper presents the results of the synthesis of several types of polycrystalline diamond film (light-gray, gray and dark-gray) on a modified silicon substrate. We discuss the technical aspects of modifying silicon substrate surface and the synthesis parameters of each type of film. The results obtained in this work allow in the future significantly increase the geometric dimensions of deposited diamond films without reducing their quality, which will make it possible to use them as optical windows.