Skip to content

NV-center distribution and ODMR spectra in two types of natural diamonds

MetadataDetails
Publication Date2022-03-01
JournalJournal of Physics Conference Series
AuthorsI. D. Breev, V. V. Yakovleva, A. N. Anisimov
InstitutionsNorthern (Arctic) Federal University, Ioffe Institute
AnalysisFull AI Review Included
  • Objective: Investigate nitrogen-vacancy (NV) center distribution and ODMR spectra in two natural diamond samples—one neutron-irradiated (1018/cm2) and one untreated type IaA+Ib.
  • PL Mapping: Confocal photoluminescence scanning revealed a homogeneous NV distribution in the irradiated sample versus a highly anisotropic distribution aligned with sliding planes in the untreated natural sample.
  • ODMR Spectroscopy: Spin Hamiltonian parameters extracted under zero-field conditions show position-dependent fine-structure splitting.
  • Key Metric 1 (Untreated sample): Zero-field splitting D ≈ 2870 MHz; transverse anisotropy 2E ≈ 6.36 MHz.
  • Key Metric 2 (Surface-dependent variation): D values of 2870.4 MHz and 2872.4 MHz, with 2E of 6.91 MHz and 7.44 MHz at different probe positions.
  • Significance: Confirms that natural type IaA+Ib diamond hosts NV centers without artificial irradiation, opening pathways to lattice-defect characterization for quantum sensing.
  • Applications: Quantum sensors for magnetic, electric, and thermal fields; piezodetectors; qubits and quantum memory cells.
ParameterValueUnitContext
Excitation laser wavelength532nmPL mapping source
Excitation laser power5mWConfocal PL excitation
Objective NA0.75—Confocal focusing (100x)
Laser spot diameter~1µmSpatial resolution of PL scan
Collection depth~2.5µmPL sampling volume
Grating density150grooves/mmSpectrometer dispersion
Detection spectral range550-700nmPMT ODMR detection band
NV zero-phonon line (ZPL)637nmIntrinsic NV emission
Neutron irradiation fluence1018/cm2Sample 1 NV creation
Diamond type (Sample 2)IaA + Ib—Untreated natural
Zero-field splitting D (Sample 1)2870MHzODMR fit, homogeneous region
Transverse anisotropy 2E (Sample 1)6.36MHzODMR fit, homogeneous region
D at surface point A (Sample 2)2870.4MHzPosition-dependent ODMR
D at surface point B (Sample 2)2872.4MHzPosition-dependent ODMR
2E at surface point A (Sample 2)6.91MHzPosition-dependent ODMR
2E at surface point B (Sample 2)7.44MHzPosition-dependent ODMR
Electronic g-factor2.0028—NV ground state triplet
Electron spin S1—Triplet sublevels (ms = 0, ±1)
PL scan area (Sample 1)30 × 30µm2Irradiated diamond
PL scan area (Sample 2)50 × 50µm2Untreated natural diamond
  1. Sample Selection: Two natural diamond samples—Sample 1 irradiated with neutrons at fluence 1018/cm2; Sample 2 type IaA+Ib, untreated.
  2. Confocal PL Mapping: Excite with 532 nm laser (5 mW); focus through 100x objective (NA = 0.75) to ~1 µm spot; collect emission over a ~2.5 µm depth window.
  3. Spectroscopic Detection: Disperse emission with a 150 grooves/mm grating; image onto a CCD for spectral acquisition.
  4. PL Intensity Mapping: Scan 30 × 30 µm2 (Sample 1) and 50 × 50 µm2 (Sample 2) regions to map NV spatial distribution.
  5. ODMR Setup: Detect PL in the 550-700 nm band via a photomultiplier tube; drive spin transitions with a microwave antenna + generator; modulate MW amplitude with a low-frequency generator; demodulate with a lock-in amplifier.
  6. Spin Hamiltonian Fitting: Extract fine-structure parameters D and E from ODMR spectra; compare values across surface positions to reveal local strain and defect asymmetry.
  • Optical Grade Single Crystal Diamond (SCD): Engineered SCD with controlled low nitrogen concentration is the ideal substitute for natural type IaA+Ib stones, eliminating the unpredictability of natural sliding-plane NV clustering observed in Sample 2. Polishing to Ra < 1 nm ensures the smooth confocal-mapping interface required for sub-micron ODMR spatial scans.
  • Neutron-/Electron-Irradiation-Ready SCD: Ultra-low-nitrogen SCD, with thickness from 0.1 µm to 500 µm, allows customers to introduce NV centers at a precisely defined density—replicating Sample 1 conditions (1018/cm2) while avoiding the broad D-value spread (2870.4 → 2872.4 MHz) attributed to lattice inhomogeneity in untreated natural material.
  • Custom Polycrystalline Diamond (PCD): For higher-throughput quantum-sensor prototyping, PCD wafers up to 125 mm offer uniform NV-hosting substrates with reproducible ODMR signatures.
  • Dimensional Control: SCD and PCD thickness from 0.1 µm to 500 µm, with substrate thicknesses up to 10 mm, enable tailored optical path lengths matching the ~2.5 µm confocal collection depth referenced in this work.
  • Surface Engineering: Ra < 5 nm polishing on inch-size PCD and sub-nanometer polishing on SCD remove the “surface contamination” caveat noted in the paper, allowing repeatable 1 µm spot focusing without scattering losses.
  • Custom Metalization: For integration with coplanar microwave antennas, coplanar waveguides, or PCB-mounted ODMR rigs, 6CCVD offers in-house deposition of Au, Pt, Pd, Ti, W, and Cu metallization stacks—directly addressing the MW-delivery geometry referenced in the methodology.
  • Laser Cutting & Shaping: Samples can be diced to customer-specified geometries for integration into cryostats or miniaturized sensor heads.

The position-dependent spread of D and 2E observed in natural diamond highlights the value of material selection and process consistency for ODMR reproducibility. 6CCVD’s in-house PhD engineering team can advise on:

  • Selecting the right SCD grade for NV-magnetometry, electrometry, thermometry, or piezodetection projects.
  • Optimizing thickness and crystal orientation to maximize PL yield and minimize ODMR strain broadening.
  • Designing metalization layouts for low-microwave-power, high-uniformity spin drive fields.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Abstract Two types of natural diamonds were investigated by means of PL scanning and ODMR. One was irradiated by neutrons to create NV-centers and the second wasn’t specifically treated. The pattern of NV-center distribution was found such that NV-centers in untreated diamond are localized in a special direction, supposedly sliding planes. Furthermore, the spin Hamiltonian parameters E and D of NV-center ground state, calculated by ODMR spectra in untreated diamond, depend on the surface point.

  1. 2006 - Single defect centres in diamond [Crossref]
  2. 2009 - Excited-state spectroscopy of single NV defects in diamond using optically detected magnetic resonance [Crossref]
  3. 2014 - Measuring the defect structure orientation of a single NV- centre in diamond [Crossref]
  4. 2016 - Photonic Quantum Networks formed from NV- centers [Crossref]