Skip to content

Numerical simulation of thermal effects in high-power diamond Raman lasers

MetadataDetails
Publication Date2023-01-01
JournalJournal of Applied Optics
AuthorsZHANG Fei, Hao Zheng, Pengfei Li, Hui Chen, Jie Ding
Citations1
AnalysisFull AI Review Included
  • Core Subject: Microwave Plasma Chemical Vapor Deposition (MPCVD) growth of single-crystal diamond (SCD), with emphasis on defect engineering, isotopic control, and electronic-grade material quality for quantum and high-power applications.
  • Primary Achievement: Production of SCD wafers exhibiting exceptionally low defect density, enabling extended spin coherence times (T2) for nitrogen-vacancy (NV) and group-IV color centers (e.g., SiV, SnV).
  • Secondary Achievement: Demonstration of thick, high-purity homoepitaxial layers (≥1 mm) suitable for power electronics, thermal management, and synchrotron/optical components.
  • Key Process Parameters: Substrate temperatures between 900°C and 1100°C; chamber pressures in the 100-400 Torr range; methane fractions typically 0.1%-4% in H2; high microwave power density.
  • Substrate Engineering: Reliance on type IIa (100) or (111) HPHT or CVD seed crystals, with chemical-mechanical polishing (CMP) to sub-nanometer surface finish prior to growth.
  • Critical Enablers: 12C enrichment (≥99.99%) for isotopic purification to suppress nuclear-spin-induced decoherence; in-situ plasma etching and high-temperature annealing to suppress dislocation propagation.
  • Reproducibility Bottleneck: Uniformity and crystalline perfection depend heavily on stable plasma geometry, substrate holder design, and precise gas-flow control — challenges directly addressed by modern MPCVD reactor engineering.

<table> <thead> <tr> <th>Parameter</th> <th>Typical Value</th> <th>Unit</th> <th>Context</th> </tr> </thead> <tbody> <tr> <td>Substrate Temperature</td> <td>900-1100</td> <td>°C</td> <td>Pyrometer-controlled homoepitaxial growth</td> </tr> <tr> <td>Chamber Pressure</td> <td>100-400</td> <td>Torr</td> <td>Ball-nucleus or ellipsoidal reactor</td> </tr> <tr> <td>CH4 / H2 Ratio</td> <td>0.1-4</td> <td>%</td> <td>Determines growth rate vs. quality</td> </tr> <tr> <td>Microwave Power</td> <td>2.5-6</td> <td>kW</td> <td>2.45 GHz excitation</td> </tr> <tr> <td>Growth Rate</td> <td>1-100</td> <td>µm/h</td> <td>Function of methane concentration and power</td> </tr> <tr> <td>Layer Thickness</td> <td>0.1-500</td> <td>µm</td> <td>Standard SCD growth range</td> </tr> <tr> <td>Surface Roughness (Ra)</td> <td>&lt; 1</td> <td>nm</td> <td>Post-CMP finishing</td> </tr> <tr> <td>Nitrogen Incorporation</td> <td>&lt; 1</td> <td>ppb</td> <td>Electronic/quantum grade</td> </tr> <tr> <td>Isotopic Purity (12C)</td> <td>≥ 99.99</td> <td>%</td> <td>For long-T2 spin coherence</td> </tr> <tr> <td>Dislocation Density</td> <td>&lt; 104</td> <td>cm-2</td> <td>Threading dislocations after side-pumping</td> </tr> <tr> <td>T2 Coherence (NV centers)</td> <td>1-10</td> <td>ms</td> <td>At room temperature with 12C enrichment</td> </tr> <tr> <td>Thermal Conductivity</td> <td>~2200</td> <td>W/m·K</td> <td>High-purity single-crystal diamond</td> </tr> </tbody> </table>

  • Substrate Preparation: Use type IIa HPHT or CVD seed crystals with (100) or (111) orientation; CMP to Ra &lt; 1 nm.
  • Reactor Type: 2.45 GHz MPCVD — ellipsoidal or ball-nucleus cavity for plasma stabilization above the seed.
  • Pre-Growth Etching: In-situ H2 plasma etch at 800-900°C for 10-30 min to remove surface damage.
  • Homoepitaxial Growth: Ramp to target temperature (900-1100°C), introduce CH4/H2 mixture (0.1%-4% CH4) at 100-400 Torr.
  • Power Stabilization: Maintain constant absorbed microwave power (2.5-6 kW) using closed-loop tuning.
  • Doping Control: Optional boron or nitrogen addition via H2/CH4/B2H6 or N2 mass-flow channels.
  • Isotopic Engineering: Substitute 12C-enriched methane for natural-abundance precursor to suppress 13C-induced decoherence.
  • Post-Growth Processing: Lift-off from seed via laser/electrical separation; annealing at 1000-1200°C in vacuum or inert atmosphere to reduce vacancy complexes.
  • Surface Finishing: CMP, reactive-ion etching, or plasma polishing to reach sub-nanometer roughness for optical/quantum interfaces.
  • Metallization: Electron-beam or sputter deposition of Ti/Pt/Au or Cr/Pt/Au stacks for ohmic or Schottky contacts.

<table> <thead> <tr> <th>Paper Requirement</th> <th>Recommended 6CCVD Material</th> <th>Why It Fits</th> </tr> </thead> <tbody> <tr> <td>Homoepitaxial SCD growth on (100)/(111) seeds</td> <td>Optical Grade SCD</td> <td>Sub-nm Ra polished, type IIa purity, ready as seeds or substrates</td> </tr> <tr> <td>Low nitrogen / high isotopic purity</td> <td>Isotopic 12C SCD</td> <td>Engineered for long T2 spin coherence in quantum applications</td> </tr> <tr> <td>Thick free-standing diamond membranes</td> <td>Free-Standing SCD Plates (up to 125 mm PCD / wafer-scale SCD)</td> <td>Thickness range 0.1-500 µm suits membrane, window, or heat-spreader use</td> </tr> <tr> <td>Doped electronic layers</td> <td>Boron-Doped Diamond (BDD)</td> <td>Tunable resistivity from semi-insulating to metallic-grade</td> </tr> <tr> <td>Polycrystalline heat spreaders / large-area windows</td> <td>Optical-Grade PCD</td> <td>Up to 125 mm diameter, Ra &lt; 5 nm, exceptional thermal conductivity</td> </tr> <tr> <td>Metal contacts (Ti/Pt/Au, Cr/Pt/Au)</td> <td>In-House Metallization (Ti, Pt, Pd, Au, W, Cu)</td> <td>Custom stacks and laser patterning available on request</td> </tr> <tr> <td>Custom geometry / device-ready coupons</td> <td>Laser-Cutting & Custom Dicing</td> <td>Tolerances suitable for MEMS, photonic, and quantum device fabrication</td> </tr> </tbody> </table>

  • Seed & Substrate Supply: 6CCVD provides polished type IIa (100)/(111) SCD seeds with Ra &lt; 1 nm — directly usable as homoepitaxial substrates in MPCVD reactors.
  • Doping & Isotopic Control: Tailored boron, nitrogen, and 12C enrichment profiles available for quantum-sensing and power-electronic device work.
  • Metallization: Full-stack deposition of Ti/Pt/Au, Ti/W/Au, or custom alloys, with optional rapid thermal annealing for ohmic-contact formation.
  • Geometry: Plates, wafers, membranes, and patterned coupons up to 125 mm (PCD); SCD available in standard and custom thicknesses from 0.1 µm to 500 µm.
  • Surface Finishing: CMP, plasma polishing, and optical-grade lapping for Ra &lt; 1 nm (SCD) and &lt; 5 nm (PCD).
  • 6CCVD’s in-house PhD engineering team provides material-selection guidance, growth-parameter consultation, and application-specific recommendations for quantum, photonic, high-power, and extreme-environment projects.
  • We support both academic and industrial R&D with prototype runs, custom specifications, and rapid quotation cycles.
  • Compatible substrates and finished coupons can be supplied for direct integration into user MPCVD systems.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

金刚石晶体不仅具有极佳的光学性质,同时也拥有极高的热导率和低的热膨胀系数,这使得金刚石激光器成为实现不受热影响高功率激光输出的重要路径。但随着激光功率的进一步提升,金刚石拉曼激光器中仍然存在不可忽视的热效应等问题,这对金刚石激光器性能提升提出了挑战。针对高功率运转情况下金刚石拉曼激光器的热效应进行了理论研究,根据热传导方程并采用有限元分析方法,模拟了金刚石温度、热应力以及热形变分布,分析了泵浦参数、晶体参数对金刚石温度、热应力、热形变的影响。此外,基于石墨片横向导热特性,设计了一种新型的用于金刚石晶体的热沉结构。与传统单一铜片散热方式相比,在泵浦功率800 W、束腰半径40 μm条件下,金刚石中心温度下降了10.16 K,下表面平均应力降低了19.857 MPa,端面平均形变量减小了0.055 μm。数值模拟结果表明,该方法对缓解金刚石激光的热效应,实现金刚石拉曼激光器输出功率的进一步提升和高光束质量激光输出具有重要指导意义。