Skip to content

Preliminary study on design and processing of diamond compound refractive lens

MetadataDetails
Publication Date2023-01-01
JournalJournal of Applied Optics
AuthorsMeng Li-min, HE Xu, Yuncan Ma, Jun Li, Du Liangliang
AnalysisFull AI Review Included
  • Application: Compound Refractive Lens (CRL) manufacturing for Hard X-ray Free Electron Laser (XFEL) beam focusing, replacing conventional mirrors with compact, transmissive optics.
  • Material Selection: Single Crystal Diamond (SCD) is identified as the preferred CRL material due to its superior thermal stability, low X-ray absorption, and high refractive index compared to Be, Al, PMMA, and Sapphire.
  • Manufacturing Method: Femtosecond laser ablation is presented as the primary machining technique for structuring parabolic 2D X-ray focusing profiles directly into the diamond bulk.
  • Process Shift: High-repetition-rate fiber femtosecond lasers (up to 500 kHz) are recommended over traditional low-repetition-rate titanium:sapphire systems (1 kHz) for machining thick (> 500 µm) diamond substrates efficiently.
  • Geometry: 2D parabolic refractive structures with 10 µm radius and 500 µm depth produce focal lengths on the order of ~7,000 mm for high-energy X-rays.
  • Industry Impact: Establishes a replicable pathway for producing monolithic diamond X-ray optics used in beamlines, microscopy, and high-resolution imaging.

ParameterValueUnitContext
Target X-ray Energy10 keV (Standard), up to 100keVXFEL beam focusing range
Target Photon Flux1012 - 1013photons/pulseXFEL pulse characterization
Pulse Width~100fsXFEL pulse duration
Lens TypeCompound Refractive Lens (CRL)—Optical configuration
Lens GeometryParabolic 2D profile—Focusing profile
Parabola Radius (R)10µmMinimum feature size
Lens Thickness (d)500µmWall thickness of CRL unit
Theoretical Focal Length (f)~7,000mmCalculated optical path
Target MaterialSingle Crystal Diamond (SCD)—Preferred XFEL optics substrate
Femtosecond Laser TypeFiber Femtosecond—High-repetition-rate machining
Repetition Rate200 - 500kHzHigh-throughput ablation
Pulse Duration~200fsFemtosecond pulse width
Alternative LaserTi:Sapphire—Low-rep-rate reference (1 kHz)
Surface Roughness TargetRa < 1 nm (Optical Grade)nmRequired for low wavefront distortion
Wafer Dimension CapabilityUp to 125mmLarge-area processing

  1. CRL Geometric Design — Derive focal length equation from Snell’s law applied to N stacked parabolic lenses of radius R, thickness d, and refractive index decrement δ.
  2. Material Performance Modeling — Calculate transmission, attenuation length, and refractive power of Be, Al, PMMA, Sapphire, Polycrystalline Diamond, and Single Crystal Diamond across the 5-100 keV X-ray band.
  3. Material Selection — Select SCD based on lowest X-ray absorption and highest thermal stability among candidates.
  4. Femtosecond Laser Ablation — Use high-repetition-rate (200-500 kHz), ~200 fs fiber laser pulses to drill and shape parabolic microstructures.
  5. Process Optimization — Compare high-repetition-rate fiber laser ablation against conventional 1 kHz Ti:Sapphire ablation for thick (> 500 µm) diamond machining.
  6. Throughput Verification — Demonstrate that high-repetition-rate systems overcome the low material-removal-rate limitation of Ti:Sapphire systems on thick diamond.
  7. Optical Validation — Characterize ablated parabolic profiles for dimensional accuracy and surface quality suitable for X-ray transmission.

Applicable Materials This research requires Optical Grade Single Crystal Diamond (SCD) with ultra-low bulk absorption and sub-nanometer surface roughness. 6CCVD manufactures Optical Grade SCD via MPCVD with bulk thickness from 0.1 µm to 500 µm, and offers polished substrates up to 10 mm thick for applications requiring thick transmissive windows. Custom (100), (110), and (111) crystallographic orientations are available to control ablation geometry and minimize wavefront distortion.

Customization Potential The 10 µm parabolic radius and 500 µm depth referenced in this work demand tight dimensional control and post-processing capability. 6CCVD provides:

  • Custom Dimensions: Plates and wafers up to 125 mm for polycrystalline, with flexible SCD sizing to support large-aperture CRL arrays.
  • In-House Laser Cutting & Dicing: Shaping of thick diamond substrates into the lens geometry required for monolithic CRL devices.
  • Surface Polishing: Ra < 1 nm on SCD to meet the low-scattering requirement of X-ray refractive optics.
  • Custom Metalization (if required for hybrid assemblies): Ti, Pt, Au, W, Cu available for mounting fixtures, heat-spreader layers, or electrode bonding.

Engineering Support 6CCVD’s in-house PhD engineering team supports material selection for X-ray optics, beamline instrumentation, and high-energy photonics. Whether replicating this CRL study or scaling it toward multi-kilogram XFEL focusing stacks, our team can recommend crystallographic orientation, thickness grade, and surface-preparation protocols matched to your target photon energy and focal-length specification.

Call to Action For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

复合折射透镜(compound refractive lens, CRL)因具有结构紧凑、焦距可调、准直方便等优点,被用作硬X射线自由电子激光(X-ray free electron laser, XFEL)装置的光束聚焦器件。面向XFEL光束高精度聚焦对高性能CRL的实际需求,从CRL的几何结构设计原理出发,分析了不同材料CRL的性能参数,证明了单晶金刚石材料是适用于XFEL光束聚焦的CRL优选材料。同时,考虑超硬金刚石材料的难加工特性以及低重频钛宝石飞秒激光不能实现大厚度材料高效加工的实际问题,探索了高重频光纤飞秒激光对大厚度单晶金刚石材料进行高效加工的可行性。研究结果表明,高重频飞秒激光精密加工技术是实现金刚石CRL制备的有效手段。