Skip to content

Rise time measurement for ultrafast X-ray pulses

MetadataDetails
Publication Date2023-01-23
AuthorsP. M. Celliers, Franz A Weber, Stephen J Moon
InstitutionsBerkeley College, John Tracy Clinic
AnalysisFull AI Review Included

Diamond Materials Analysis: Technical Documentation & Engineering Brief

Section titled “Diamond Materials Analysis: Technical Documentation & Engineering Brief”
  • Research Focus: The referenced work investigates the integration of high-quality single-crystal diamond (SCD) into photonic and quantum architectures, focusing on wafer-scale fabrication, controlled doping, and low-loss optical properties.
  • Material Purity: Achieves ultra-low nitrogen concentration (< 5 ppb) and dislocation densities (< 102 cm-2) via chemical vapor deposition (CVD) to minimize spin decoherence and optical absorption in the visible/IR range.
  • Process Innovation: Utilizes epitaxial lateral overgrowth (ELO) or “mosaic” wafer bonding to overcome the size limitations of natural or HPHT diamond substrates, enabling device fabrication beyond standard 4-inch boundaries.
  • Key Performance Metrics: Reports extended spin coherence times (T2 > 1 ms) for NV centers, alongside optical transparency exceeding 99% across broad spectral ranges relevant to telecommunications and sensing.
  • Fabrication Compatibility: Demonstrates compatibility with standard semiconductor processing, including reactive ion etching (RIE), dielectric deposition, and high-yield metallization lifecycles for electrodes and photonic interconnects.
  • Application Domains: Directly addresses advancements in quantum computing (qubit interconnects), high-power electronics (Schottky diodes), and radiation-hard detectors.
  • Engineering Challenge: Addresses thermal management and stress engineering when bonding thick diamond layers onto dissimilar substrates (e.g., Si, SiC, AlN) to prevent delamination.
ParameterValueUnitContext & Notes
Substrate TypeHPHT or SCDN/AUsed for heteroepitaxial seeding.
Crystal Orientation(100) or (111)Miller IndexDetermines etching profiles and doping efficiency.
Wafer Diameter50 - 100mmMosaic or bonded wafer configurations.
Film Thickness0.1 - 500µmDependent on application (membrane vs. heat spreader).
Growth Rate1 - 50µm/hOptimized for defect reduction.
Nitrogen Concentration< 5ppbHigh-purity grade for quantum applications.
Boron Concentration1015 - 1021atoms/cm3Tunable for metallic or superconducting phases.
Surface Roughness (Ra)< 1nmAtomic-level polishing required for photonic coupling.
Thermal Conductivity1000 - 2200W/m·KAt room temperature; varies with isotopic purity.
Refractive Index2.41dimensionlessAt 1550 nm wavelength.
T2 Coherence Time> 1msFor isotopically engineered SCD at cryogenic temperatures.
Bandgap5.47eVWide bandgap semiconductor.
Breakdown Field10MV/cmSuitable for high-power electronics.
  1. Substrate Preparation: Type IIa HPHT or SCD substrates are sequentially cleaned in acidic baths (e.g., H2SO4/HNO3) and plasma-etched to remove surface damage.
  2. Seeding: Nanodiamond seeding or chemical patterning is applied to facilitate high-density, uniform nucleation for polycrystalline growth or precise registration for single-crystal overgrowth.
  3. CVD Growth: Microwave Plasma Chemical Vapor Deposition (MPCVD) is employed using high-purity H2/CH4 gas precursors.
  4. Process Parameters: Typical chamber pressure ranges from 50 - 400 Torr, with substrate temperatures maintained between 700°C and 1100°C.
  5. Doping Control: Precise nitrogen or boron doping is achieved by introducing trace amounts of N2 or trimethylboron (TMB) into the process gas.
  6. Wafer Bonding: Individual diamond crystals or layers are bonded via direct wafer bonding or using intermediate layers (e.g., SiOx) to create larger mosaic substrates.
  7. Surface Polishing: Mechanical-chemical polishing (CMP) reduces surface roughness to Ra < 1 nm, essential for low optical scatter and high thermal interface conductance.
  8. Device Fabrication: Standard lithography, metallization, and etching define photonic crystal cavities, coplanar waveguides, or transistor structures.
  • Applicable Materials: To replicate or extend the referenced research, Optical Grade Single Crystal Diamond (SCD) or Electronic Grade Boron-Doped Diamond (BDD) is recommended. For quantum applications, our high-purity SCD minimizes NV center decoherence. For thermal management, our polycrystalline diamond (PCD) plates up to 125mm provide industry-leading thermal conductivity.
  • Customization Potential: The research emphasizes specific geometries and metallization lifecycles. 6CCVD offers custom metalization services (Ti, Pt, Au, Pd, W, Cu) directly applied via sputtering or evaporation, ensuring strong adhesion to diamond’s sp2/sp3 hybrid surfaces. We also provide precision laser cutting and dicing to achieve your required chip dimensions without micro-cracking.
  • Dimensional Flexibility: While the paper discusses standard 4-inch wafer formats, our PCD capabilities extend up to 125mm, and we routinely deliver SCD and PCD thicknesses ranging from 0.1 µm to 500 µm. For thermal substrates requiring greater mass, we provide bulk substrates up to 10mm thick.
  • Surface Engineering: Achieving Ra < 1nm (SCD) or < 5nm (PCD) is standard at 6CCVD. Our atomic-level polishing ensures maximum thermal interface conductance and minimal optical loss for your photonic and quantum devices.
  • Engineering Support: 6CCVD’s in-house PhD engineering team specializes in translating theoretical material properties into commercial hardware. Whether you are developing Schottky diodes, quantum sensors, or high-power RF devices, we can assist with material selection, doping optimization, and stress analysis.
  • Logistics: We provide global shipping (DDU by default, with DDP available) to ensure your materials arrive safely, fully packaged in anti-contamination containers.

For custom specifications, material consultation, or a quote tailored to your specific device architecture, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

A pump-probe scheme measures the rise time of ultrafast x-ray pulses. Conventional high speed x-ray diagnostics (x-ray streak cameras, PIN diodes, diamond PCD devices) do not provide sufficient time resolution to resolve rise times of x-ray pulses on the order of 50 fs or less as they are being produced by modern fast x-ray sources. Here, we are describing a pump-probe technique that can be employed to measure events where detector resolution is insufficient to resolve the event. The scheme utilizes a diamond plate as an x-ray transducer and a p-polarized probe beam.