Skip to content

Impact of grain-dependent boron uptake on the nano-electrical and local optical properties of polycrystalline boron doped CVD diamond

MetadataDetails
Publication Date2023-12-05
JournalSemiconductor Physics Quantum Electronics & Optoelectronics
AuthorsА.С. Ніколенко, P. M. Lytvyn, V. V. Strelchuk, Ihor Danylenko, S.V. Malyuta
Citations1
AnalysisFull AI Review Included
  • Core Focus: Nanoscale investigation of how boron dopant distribution varies across individual grains in polycrystalline MPCVD diamond films and its impact on local electrical and optical properties.
  • Material Analyzed: Free-standing polycrystalline boron-doped diamond (BDD) film with {110} texture, ~100 µm thick, featuring 200…800 nm surface grains and crystallites up to tens of microns in size.
  • Doping Regime: Moderate boron concentration of ~3·1019 cm−3 (SIMS measurement), placing the material in the intermediate hopping conduction regime.
  • Key Methodology: Correlative multi-technique approach combining Scanning Spreading Resistance Microscopy (SSRM), Conocal Raman/PL micro-mapping, and conductive AFM with Pt tips (< 20 nm radius).
  • Critical Finding: Multi-modal resistivity distribution with 20…120% disparity between grains, directly linked to grain-orientation-dependent boron uptake (~10× preferential incorporation into {111} versus {100} orientations).
  • Quantum Relevance: Identification of NV0 (2.15 eV), NV− (1.946 eV), and Donor-Acceptor Pair (DAP) bands demonstrates utility for color-center engineering and quantum information applications.
  • Engineering Implication: Precise control of synthesis conditions (strain fields, defects) is essential to homogenize local chemical potentials for uniform boron incorporation in electronic, electrochemical, and quantum devices.

ParameterValueUnitContext
SubstrateSi (100)—Growth substrate for MPCVD deposition
Film Texture{110} columnar—Polycrystalline orientation
Boron Concentration2.8…3·1019at./cm3Measured by SIMS
Film Thickness100µmAfter back-thinning and polishing
Surface Roughness (RMS)< 15nmAcross 15×15 µm AFM field
Surface Grain Size200…800nmAfter polishing from seed side
Bulk Crystallite Size60 ± 20µmColumnar crystallites
Preferential B Uptake Ratio~10×—{111} versus {100} grains
Metallization StackTi (28) / Pd (100) / Au (200)nmMagnetron sputtered, substrate at 350 °C
Contact TypeOhmic—Confirmed via TLM and I-V curves
SSRM Resistance (BDD)~100MΩAcross nanograins
SSRM Resistance (Au Surface)~0.2MΩTi/Pd/Au contact top layer
Resistance Disparity (Grains)20…120%Multi-modal distribution
Grain Boundary Resistance (Au)+10…13%Elevated versus grain interior
He-Cd Laser 1325 (3.82 eV)nm (eV)UV excitation source
He-Cd Laser 2442 (2.81 eV)nm (eV)Visible excitation source
Solid-State Laser532 (2.33 eV)nm (eV)Green excitation source
Laser Spot Diameter~0.6µm100× / NA 0.9 objective
Mapping Step0.1µmMotorized XYZ stage
Low-Temperature PL77KLiquid N2 cooled Linkam THMS600 cell
NV0 Center Emission2.155eVCharacteristic PL band
NV− Center Emission1.946eVCharacteristic PL band
DAP Emission2.59…2.65eVDonor-Acceptor Pair recombination
Diamond Raman Peak (F2g)~1332cm−1Fano-broadened at high [B]
Conductivity Threshold (Semiconductor)~1018cm−3Insulator-to-semiconductor transition
Metallic Threshold> 1021cm−3Hopping-to-metallic transition

  • Film Growth: Microwave Plasma CVD (MPCVD) on Si substrate producing free-standing polycrystalline BDD wafer after Si chemical etching.
  • Wafer Preparation: Mechanical thinning and polishing to 100 µm final thickness with RMS < 15 nm.
  • Metallization: Magnetron sputtering of Ti (28 nm) / Pd (100 nm) / Au (200 nm) at substrate temperature of 350 °C, followed by photolithography for Transmission Line Method (TLM) test structures.
  • Morphological Characterization: Atomic Force Microscopy (AFM) using a NanoScope IIIa Dimension 3000™ SPM for surface height mapping.
  • Nano Electrical Mapping: Scanning Spreading Resistance Microscopy (SSRM) in contact mode with solid Pt probes (nominal tip radius < 20 nm), using the Ti/Pd/Au planar contact as ground electrode.
  • Spectroscopy — Raman Mapping: Horiba Jobin-Yvon T-64000 spectrometer with Olympus BX41 microscope; three excitation wavelengths (325, 442, 532 nm); backscattering geometry at ambient temperature.
  • Spectroscopy — PL Mapping: Confocal micro-PL at 77 K using a Linkam THMS600 liquid-N2 cooled stage; 2D spatial mapping at 0.1 µm step size.
  • Compositional Analysis: Secondary Ion Mass Spectrometry (SIMS) for absolute boron concentration calibration.

Paper RequirementRecommended 6CCVD Material
Polycrystalline BDD with {110} texture for nano-electrical studiesHeavy Boron Doped PCD with controlled [B] in the 1019…1021 cm−3 range
Moderate doping regime (~3·1019 cm−3)Custom-engineered BDD films with SIMS-verified boron concentration
Free-standing 100 µm wafersPCD substrates and free-standing films up to 500 µm thickness
High crystal quality with low sp2 contentOptical-grade PCD with Ra < 5 nm surface finish on inch-size parts
NV center engineering for quantum applicationsCustom PCD films with controlled nitrogen incorporation for color-center density tuning
  • Metalization: 6CCVD offers in-house sputtering of Au, Pt, Pd, Ti, W, and Cu. The exact Ti/Pd/Au stack used in this study (28/100/200 nm) can be replicated or modified to specification, eliminating reliance on third-party foundries.
  • Dimensional Control: PCD plates and wafers available up to 125 mm diameter. Custom thickness from 0.1 µm to 500 µm (films) and up to 10 mm (substrates).
  • Laser Cutting & Patterning: Photolithography-compatible test structures (TLM patterns, coplanar contacts) can be prepared via in-house laser micromachining for rapid prototyping.
  • Polishing: Sub-15 nm RMS finishes achievable on both seed and growth sides for correlative SSRM/spectroscopy workflows identical to the paper’s methodology.
  • Texture Engineering: Both {100}-dominant and {110}-textured PCD films producible to systematically investigate the ~10× {111}/{100} boron uptake differential reported in the paper.
  • 6CCVD’s in-house PhD engineering team can assist with material selection for nano-electrical characterization projects, NV-center quantum sensor development, and electrochemical BDD electrode design.
  • Consultation available on optimal doping regimes (semiconducting ~1018 cm−3 versus metallic > 1021 cm−3) for specific device targets.
  • Custom SIMS-calibrated boron concentration lots available to ensure reproducibility across research campaigns.
  • Support for correlative SPM/PL/Raman workflows including pre-patterned metallized chips for immediate SSRM measurement upon receipt.

For custom specifications, SIMS-verified boron doping concentrations, metallization stacks, or material consultation on boron-doped diamond research and device prototyping, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Boron-doped diamond (BDD) films grown by chemical vapor deposition (CVD) exhibit unique electrical and optical properties owing to the non-uniform uptake of boron dopants across grains. This study utilizes scanning probe microscopy and confocal micro- spectroscopy techniques to elucidate the influence of grain-dependent boron incorporation on the nano-electrical and local optical characteristics of polycrystalline BDD. The CVD- grown BDD film contained crystallites up to tens of microns, while the surface comprised 200…800 nm grains. Scanning spreading resistance microscopy (SSRM) revealed significant nanoscale resistance variations among individual grains, attributable to differential boron distributions. No distinct grain boundary features were discernible in SSRM data, likely due to the high boron doping of ~ 3·10 19 cm -3 . SSRM of the Au surface of a BDD/Ti/Pd/Au contact indicated a comparable granular morphology but three orders lower resistance. A network of more resistive grain boundaries was evident, modulated by underlying BDD grain clusters. Photoluminescence spectroscopy showed characteristic bands of nitrogen-vacancy centers and donor-acceptor pairs. Confocal Raman and photoluminescence mapping elucidated substantial spatial heterogeneity in micrometer- scale grains regarding crystal quality, boron and nitrogen concentrations, related to preferential incorporation. The observed peculiarities in BDD’s structural and nano- electrical characteristics stem from inherent growth inhomogeneities and grain-dependent boron uptake influenced by defects and strain fields modifying local chemical potentials. This multifaceted nanoscale examination provides critical insights into optimizing electrical and optical properties of BDD films by controlling synthesis conditions and minimizing defects for tailored performance in electronic, electrochemical, and quantum applications.