Skip to content

Near-zero-field microwave-free magnetometry with nitrogen-vacancy centers in nanodiamonds

MetadataDetails
Publication Date2024-04-24
JournalOptics Express
AuthorsOmkar Dhungel, Mariusz Mrózek, T. Lenz, Viktor Ivády, Ádám Gali
InstitutionsJohannes Gutenberg University Mainz, Linköping University
Citations4
AnalysisFull AI Review Included
  • Core Achievement: Demonstration of a microwave-free, all-optical magnetometry modality utilizing the characteristic near-zero-field fluorescence dip in Nitrogen-Vacancy (NV-) centers, eliminating the need for complex RF delivery infrastructure.
  • Method: Analysis of the Zero-Field Feature (ZFF) contrast and linewidth across varying nanodiamond sizes (30 nm - 3000 nm) and transverse bias fields, correlated with Optically Detected Magnetic Resonance (ODMR) strain splitting data.
  • Sensitivity: Achieved a photon shot-noise limited sensitivity of approximately 200 nT/√Hz using a 140 nm nanodiamond at 0.75 mW laser power.
  • Key Finding: The ZFF originates from cross-relaxation effects among degenerate NV orientations, making the technique highly robust against the random crystallographic orientation typical in nanodiamond ensembles.
  • Application: Proposed a “salt-and-pepper” magnetic imaging technique using randomly oriented nanodiamonds for inspection of printed circuit boards (PCBs) and biomedical imaging.
  • Size Dependency: Identified an optimal nanodiamond size (~500 nm) that maximizes fluorescence contrast by balancing surface charge instability (fluctuators) against bulk spin properties.
  • Strain Correlation: Validated that increased strain in smaller nanodiamonds broadens the zero-field resonance, directly impacting sensor resolution.
ParameterValueUnitContext
Tested Nanodiamond Sizes30, 40, 50, 70, 100, 140, 250, 300, 750, 3000nmRange of particle diameters tested
Bulk Sample NV Concentration~7ppmReference bulk CVD diamond sample
ND Sample NV Concentration1.5 - 3.5ppmRange across tested nanodiamonds
Bulk Sample Orientation[100]-Crystallographic orientation of reference diamond
Tested Magnetic Field Range±40GaussRange of scanned static magnetic fields
XY Coil Constants16.94 (X), 7.34 (Y)G/AMagnetic field generation per ampere
Current Sweep Range0 to 3AProgrammed current ramp (110 points)
Averaging Cycles512-Number of fluorescence signal averages
Transverse Bias Fields3.67, 7.34, 11.01, 25.69GTransverse magnetic fields applied
Test Laser Powers0.75, 1, 2.5, 7.5, 12.5, 25, 75, 125mWExcitation power levels for fluorescence
Optimal Laser Power0.75mWPower used for 140 nm ND sensitivity calculation
Detected Fluorescence~16nWFluorescence from 140 nm ND at 0.75 mW
Resonance Width (140 nm)2mTLinewidth of the zero-field dip
Contrast (140 nm)4%Depth of the fluorescence dip
Photon Shot-Noise Sensitivity~200nT/√HzMagnetic field sensitivity limit
MW GeneratorSRS SG386-Microwave source for ODMR reference
MW AmplifierK&L 0842M47A-Microwave amplification stage
MW Antenna TypeResonant PCB-2mm central opening for uniform field
  1. Sample Preparation: Ensembles of nanodiamonds (Adamas Nanotechnologies & Petr Cigler group) with sizes ranging from 30 nm to 3000 nm were prepared on microscope slides.
  2. Static Magnetic Field Generation: A custom XY coil system driven by a HAMEG HMP4040 power supply was used to generate the scanned static magnetic field. The current was ramped linearly across 110 points.
  3. Fluorescence Detection (Microwave-Free Mode): A laser beam was directed through a dichroic mirror and microscope objective (10X). The resulting fluorescence was collected, passed through the dichroic mirror, and recorded on a scope.
  4. Optically Detected Magnetic Resonance (ODMR) Protocol: The apparatus was augmented with a microwave (MW) delivery system (generator + amplifier + resonant PCB antenna) to perform standard ODMR measurements for strain characterization.
  5. T1 Relaxation Measurement: Longitudinal spin relaxation times were quantified using the “relaxation-in-the-dark” method to correlate spin dynamics with fluorescence intensity.
  6. Zero-Field Feature (ZFF) Profiling: Fluorescence intensity was recorded as a function of magnetic field sweep to determine the linewidth and contrast of the near-zero-field dip.
  7. Bias Field Application: Transverse magnetic fields (3.67 G to 25.69 G) were superimposed to probe the energy level degeneracy and cross-relaxation behavior of the NV centers.
  8. Power Dependence Analysis: Laser excitation power was varied from 0.001 mW to 125 mW to observe the light-narrowing effect on the ZFF.

This groundbreaking microwave-free magnetometry research relies heavily on the precise engineering of the diamond host material and its spin-active defect density. To replicate or extend this work, consider the following 6CCVD material pathways.

  • Applicable Materials:

    • Optical Grade Single Crystal Diamond (SCD): For the reference bulk sample and high-sensitivity vector magnetometry, our SCD plates with sub-nanometer roughness (Ra < 1nm) provide the ideal platform for high NV density integration and reduced surface defects.
    • High-Pressure High-Temperature (HPHT) or Custom CVD Nanodiamonds: To manufacture the 30 nm-3000 nm NV-doped particles, we offer custom bulk diamond crystals with tailored NV concentrations (1.5 ppm to 7 ppm) which can be processed down to specific size distributions.
    • Polycrystalline CVD (PCD) Plates: For the proposed wide-field “salt-and-pepper” imaging of PCBs, our PCD wafers (up to 125mm diameter) offer a scalable, cost-effective substrate that can be milled into NV-active sensing layers.
  • Customization Potential:

    • Substrate Engineering: The paper notes that the strain and electric-field noise vary significantly with particle size and surface proximity. We provide custom SCD substrates up to 10mm thick, allowing researchers to control the defect depth profile via our precision polishing services.
    • Tailored Doping: Achieving optimal cross-relaxation requires precise nitrogen concentration control. We engineer custom boron-doped and nitrogen-doped profiles to meet specific relaxometry (T1, T2) requirements.
    • Advanced Metallization: While the “salt-and-pepper” technique requires bare particles, integration into MEMS or lab-on-chip devices demands reliable contacts. We offer in-house metallization with Au, Pt, Pd, Ti, W, and Cu for hybrid quantum sensor packaging.
  • Engineering Support:

    • The research highlights the critical balance between spin coherence (T1) and surface charge stability (fluctuators). Our in-house PhD engineering team specializes in quantum material selection and can assist in optimizing the trade-off between NV concentration and surface defect density for your specific quantum sensing application.
    • Whether your project involves standard ODMR, this novel microwave-free modality, or deep-tissue biomedical imaging, our team can provide material consultation to ensure your diamond host matrix matches your experimental parameters.

Call to Action: For custom specifications, specific NV concentration requirements, or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We study the fluorescence of nanodiamond ensembles as a function of static external magnetic field and observe characteristic dip features close to the zero field with potential for magnetometry applications. We analyze the dependence of the feature’s width and the contrast of the feature on the size of the diamond (in the range 30 nm-3000 nm) and on the strength of a bias magnetic field applied transversely to the field being scanned. We also perform optically detected magnetic resonance (ODMR) measurements to quantify the strain splitting of the zero-field ODMR resonance across various nanodiamond sizes and compare it with the width and contrast measurements of the zero-field fluorescence features for both nanodiamonds and bulk samples. The observed properties provide compelling evidence of cross-relaxation effects in the NV system occurring close to zero magnetic fields. Finally, the potential of this technique for use in practical magnetometry is discussed.

  1. 2009 - Development and use of fluorescent nanodiamonds as cellular markers