Skip to content

Widely tunable and narrow-linewidth hybrid-integrated diode laser at 637 nm

MetadataDetails
Publication Date2024-07-09
JournalOptics Express
AuthorsLisa V. Winkler, Kirsten Gerritsma, Albert van Rees, Philip P. J. Schrinner, Marcel Hoekman
InstitutionsToptica Photonics (Germany), LioniX (Netherlands)
Citations16
AnalysisFull AI Review Included

Widely Tunable Hybrid-Integrated Diode Laser at 637 nm: Technical Analysis

Section titled “Widely Tunable Hybrid-Integrated Diode Laser at 637 nm: Technical Analysis”
  • Breakthrough Achievement: First hybrid-integrated Extended Cavity Diode Laser (ECDL) demonstrating continuous tuning centered at 637 nm, packaged in a standard 14-pin butterfly housing.
  • Optical Performance: Achieved a narrow intrinsic linewidth down to < 10 kHz using a low-coupling configuration, and a record 97 GHz manual mode-hop free tuning range with the high-coupling variant.
  • Target Applications: Precisely addresses the zero-phonon line of Nitrogen-Vacancy (NV) centers in diamond for quantum sensing, while also providing a chip-scale alternative to 633 nm HeNe metrology lasers.
  • Waveguide Engineering: Utilized a proprietary double-stripe Si3N4 waveguide cross-section (22 nm / 48 nm core layers, 100 nm spacing) achieving ultra-low propagation loss of 0.33 dB/cm at 637 nm.
  • Wavelength Coverage: Broad spectral coverage spanning 8.6 nm (632.9 nm - 641.5 nm) restricted only by the gain bandwidth of the GaAs semiconductor optical amplifier.
  • Integration Scalability: Complete photonic, thermal, and electronic packaging (thermoelectric cooler, NTC thermistor, 9-channel fiber array) provides intrinsic stability required for portable quantum optical platforms.
ParameterValueUnitContext
Center Wavelength637nmTunable range targeting NV centers and HeNe replacement
Spectral Coverage (High-κ)8.6 (632.9 - 641.5)nmRange limited by gain chip bandwidth
Spectral Coverage (Low-κ)7.7 (635.8 - 643.6)nmRange limited by gain chip temperature
Intrinsic Linewidth (Low-κ)< 10kHzSchawlow-Townes limit; white noise floor of 3 kHz2/Hz
Intrinsic Linewidth (High-κ)198 (± 50)kHzDerived from 63 kHz2/Hz white noise level
Mode-Hop Free Tuning (High-κ)97GHzManual tuning using MRR1, MRR2, PS, and TC
Mode-Hop Free Tuning (Low-κ)43GHzManual continuous tuning range
Automatic MHFT (High-κ)55GHzFeed-forward control without active feedback
Propagation Loss0.33 (± 0.05)dB/cmMeasured via 47-cm spiral at 637 nm
Waveguide GeometryDouble-Stripe Si3N4-22 nm & 48 nm cores, 800 nm width, 82° sidewall angle
Bend Radius100µmMinimum bend radius with negligible bend loss
Round-Trip Propagation Loss0.9 / 3.8dBHigh-coupling laser / Low-coupling laser
Maximum Fiber Output Power2.5mWLow-coupling laser, monitor port 1
Maximum On-Chip Power4.0mWCorresponding internal power
Slope Efficiency (Low-κ)0.10W/ALinear fit above threshold
Threshold Current (Low-κ)40.7mALinear fit threshold
ASE-SNR (Low-κ)~24dBAmplified spontaneous emission suppression
Gain Chip MaterialGaAs-EXALOS custom SOA, 638 nm peak
Heater Step (Coarse)11mWIncrements for MRR tuning (FSR of 0.35 nm)
  1. Waveguide Fabrication: Patterned using DUV stepper lithography (248 nm source, 250 nm minimum feature size) to define a double-stripe Si3N4 cross-section optimized for minimal sidewall scattering.
  2. Loss Characterization: Quantified propagation losses via transmission measurements through a 47-cm waveguide spiral against a straight reference using a supercontinuum source.
  3. Hybrid Integration: Aligned and bonded a GaAs semiconductor optical amplifier (SOA) to the Si3N4/SiO2 feedback chip, utilizing lateral tapers for mode matching and epoxy bonding for assembly stability.
  4. Photonic Packaging: Encapsulated the hybrid device in a 14-pin butterfly package equipped with a thermoelectric cooler (TEC), NTC thermistor, and a 9-channel fiber array to monitor all optical ports.
  5. Thermal Tuning Protocol: Coarse tuning executed by stepping MRR heater power by ~11 mW increments (triggering mode hops of 0.35 nm), followed by fine-tuning of phase section (PS) and tunable coupler (TC) heaters for maximum output power.
  6. Automated Feed-Forward Tuning: Ramped heater powers linearly in a 1:1:8 ratio (MRR1:MRR2:PS) via serial commands, achieving 55 GHz of mode-hop free tuning without active feedback loops.
  7. Linewidth Measurement: Evaluated intrinsic laser linewidth via delayed self-heterodyne detection using a 20-m fiber delay line and a 40-GHz acousto-optic modulator to extract white noise floor.

The photonic packaging demonstrated in this work demands diamond materials with exceptionally precise dimensions, ultra-low surface roughness, and robust metallization to handle thermal expansion mismatches between bonded semiconductor and dielectric platforms.

  • Applicable Materials: To replicate or extend the thermal management and mounting architectures used here, our Optical Grade Single Crystal Diamond (SCD) or Polycrystalline Diamond (PCD) substrates are required. Diamond’s unmatched thermal conductivity (≥ 1800 W/m·K for SCD) is essential for dissipating heat generated by the TEC, resistive heaters, and gain chip, preventing the ~3 nm redshift observed when sensor placement is suboptimal.
  • Customization Potential: Achieving the ultra-precise mode matching and assembly reliability shown in the 14-pin butterfly package requires tailored heat spreaders and submounts. 6CCVD provides custom laser cutting and shaping for diamond plates and wafers up to 125 mm (PCD), with thicknesses ranging from 0.1 µm to 10 mm, allowing exact integration into hybrid photonic assemblies.
  • Engineering Support: The target application—addressing the 637 nm zero-phonon line of NV centers in diamond—directly relies on high-purity diamond hosts. 6CCVD’s in-house PhD engineering team can assist with material selection, isotopic purity analysis, and custom growth recipes for quantum sensing substrates or NV-center experiments requiring tight wavelength stability.
  • Metallization Integration: 6CCVD offers internal metallization capabilities (Ti, Pt, Au, Pd, W, Cu) suitable for bonding diamond submounts into semiconductor laser packages, ensuring reliable thermal and electrical interfaces. Surface polishing down to Ra < 1 nm (SCD) and Ra < 5 nm (inch-size PCD) provides the optical-grade flatness needed for epoxied or soldered photonic stacks.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We present hybrid-integrated extended cavity diode lasers tunable around 637 nm, with a gain-wide spectral coverage of 8 nm. This tuning range addresses the zero-phonon line of nitrogen-vacancy centers and includes the wavelength of HeNe lasers (633 nm). Best performance shows wide mode-hop free tuning up to 97 GHz and a narrow intrinsic linewidth down to 10 kHz. Also, the maximum output power is 2.5 mW in a single-mode fiber, corresponding to an on-chip power of 4.0 mW. Full integration and packaging in standard housing with fiber pigtails provide high intrinsic stability and enable integration into complex optical systems.