Skip to content

Simulation of Substrate Temperature Distribution in Diamond Films Growth on WC-Co Tools Using HFCVD Method

MetadataDetails
Publication Date2018-01-01
JournalJournal of Materials Science and Chemical Engineering
AuthorsJianguo Zhang, Yigao Yuan, Jinjiang Zhang
InstitutionsDonghua University
AnalysisFull AI Review Included

Technical Documentation: Simulation of Substrate Temperature Distribution in Diamond Films Growth on WC-Co Tools Using HFCVD Method

Section titled “Technical Documentation: Simulation of Substrate Temperature Distribution in Diamond Films Growth on WC-Co Tools Using HFCVD Method”
  • Objective: Optimize Hot Filament Chemical Vapor Deposition (HFCVD) parameters for depositing high-quality polycrystalline diamond (PCD) films on Tungsten Carbide-Cobalt (WC-Co) cutting tools.
  • Methodology: Three-dimensional finite element simulation combined with empirical validation to analyze the thermal field distribution on complex tool geometries.
  • Key Variables: Filament separation distance (D) and vertical distance between filaments and the drill point (H) were isolated as the primary thermal control parameters.
  • Optimal Parameters Identified: A filament separation (D) of 35 mm and a vertical offset (H) of −10 mm yielded the most uniform substrate temperature distribution across the rake and flank faces of the drill.
  • Material Quality Achieved: Continuous PCD films with an average grain size of approximately 2 µm were deposited, confirmed by a sharp characteristic diamond Raman peak at 1332 cm−1, indicating high sp3 bond purity.
  • Process Boundary Conditions: Filament temperature held constant at 2200 °C; reactor pressure maintained between 2000-3000 Pa; carbon source via hydrogen/acetone mixture with 4 vol% acetone concentration.
  • Significance: Demonstrates that geometric arrangement of filaments is critical for achieving thermal uniformity, directly impacting grain size, film continuity, and adhesion on WC-Co substrates.
ParameterValueUnitContext
Deposition MethodHFCVD—Hot Filament Chemical Vapor Deposition
Filament MaterialTantalum—Filament composition
Filament Diameter0.5mmExcitation hot filament geometry
Filament Temperature2200°CConstant during deposition process
Optimal Filament Separation (D)35mmDistance between parallel filaments
Optimal Vertical Offset (H)−10mmFilaments positioned below drill point
Reaction Pressure2000 - 3000PaOperating chamber pressure range
Acetone Concentration4vol%Carbon source concentration in H2 carrier
Bias Current0.2AApplied substrate bias
Deposition Time5hTotal deposition duration
Initial Chamber Temperature25°CBaseline ambient condition
Initial Chamber Pressure3000PaSimulation starting condition
Average Diamond Grain Size~2µmSEM measurement of as-deposited film
Diamond Raman Peak1332cm−1Characteristic sp3 bond signature
Fluid Flow RegimeLaminar—Defined simulation boundary condition
Substrate MaterialWC-Co—Tungsten Carbide with Cobalt binder
  • Geometric Modeling: Established a three-dimensional finite volume model of the HFCVD reactor chamber, incorporating five drill positions (tools 1-5) to simulate spatial thermal gradients across the workpiece array.
  • Simulation Setup: Defined the fluid zone (hydrogen/acetone gas mixture) as a laminar incompressible-ideal-gas region; neglected chemical reaction heat and the radiative effect of hydrogen.
  • Parameter Isolation Studies: Varied filament separation (D = 25, 30, 35 mm) while holding vertical offset constant; then varied vertical offset (H = −10, 0, +5 mm) while holding separation constant at the optimum.
  • Boundary Conditions: Fixed filament temperature at 2200 °C; initial chamber temperature at 25 °C; pressure at 3000 Pa.
  • Experimental Validation: Deposited diamond films on pretreated WC-Co drills using the simulated optimum parameters (D = 35 mm, H = −10 mm).
  • Characterization Protocol: Surface morphology evaluated via Scanning Electron Microscopy (SEM); chemical bond quality assessed via Raman spectroscopy targeting the 1332 cm−1 diamond peak.
  • Applicable Materials:

    • High-Quality Polycrystalline Diamond (PCD): For replicating the cutting tool coatings in this study, 6CCVD’s standard PCD is ideally suited, offering grain size control and uniform film morphology matching the ~2 µm grain structure demonstrated in this paper.
    • Custom PCD for Coated Tools: For applications requiring diamond-coated WC-Co substrates, 6CCVD can provide freestanding PCD plates or work with clients to deposit PCD onto customer-supplied tool geometries, leveraging expertise in thermal management during CVD growth.
  • Customization Potential:

    • Thickness Versatility: The paper emphasizes film uniformity, a property directly tied to substrate temperature control. 6CCVD’s PCD thickness range (0.1 µm to 500 µm) provides full flexibility to match the exact film thickness required for specific tool coating applications.
    • Large-Area Capability: While the paper discusses five-tool arrays, 6CCVD’s capability to produce PCD plates up to 125 mm enables scaling of uniform diamond coatings for larger tooling batches without sacrificing thermal homogeneity.
    • Metalization Options: Although the paper focuses on direct diamond-on-WC-Co deposition, 6CCVD’s internal metalization capabilities (Au, Pt, Pd, Ti, W, Cu) support hybrid tooling designs requiring brazed interfaces or electrical contacts.
  • Engineering Support:

    • Thermal Modeling Assistance: 6CCVD’s in-house PhD engineering team can support clients in finite element thermal simulations for novel CVD reactor geometries, replicating the parameter optimization approach demonstrated in this study.
    • Material Selection Consultation: For projects targeting cutting tool enhancement, thermal management substrates, or wear-resistant coatings, our engineers provide guidance on optimal PCD grade, grain size, and thickness selection.
    • Reactor Design Insight: The paper’s emphasis on filament arrangement (D, H parameters) underscores the importance of CVD reactor design. 6CCVD can advise on substrate-fixturing strategies to achieve uniform deposition on complex geometries.
  • Call to Action: For custom specifications, thermal modeling support, or material consultation on diamond-coated tooling and PCD film applications, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

The substrate temperature is an important factor for diamond films fabricated by hot filament chemical vapor deposition (HFCVD), which affects the grain size and quality of diamond films. In order to deposit polycrystalline diamond films with good quality on the cutting tool, the substrate temperature distribution needs to be further studied. Thus three-dimensional finite element simulations are used to investigate the temperature field with different arrangements of filaments which have profound influences on substrate temperature distribution. Based on the simulation results, the optimum parameters of distance away from drill points and gap between filaments are founded. Subsequently, experiments of depositing diamond films on WC-Co drills are conducted with the optimum values gained from the simulation results. Then, the as-fabricated diamond films are investigated by scanning electron microscopy (SEM) and Raman spectroscopy. The results indicate that the surface of drill are covered with a layer of continuous diamond films, which validate that the simulated deposition parameters are conducive and provide a new method to adjust the substrate temperature distribution in the CVD reactor for depositing diamond films.