Enhanced natural convective heat transfer in a horizontal elliptic annulus using a diamond fin vortex generator and MWCNT-MgO nanofluid

At a Glance

Metadata	Details
Publication Date	2025-05-05
Journal	Case Studies in Thermal Engineering
Authors	Vivek Kumar, S. Ajith Kumar, R. Vikas
Citations	1

Abstract

Optimizing heat transfer within the annular region of concentric horizontal cylinders is critical for improving the efficiency and reliability of industrial cooling systems, particularly in waste heat recovery and thermal management applications. Conventional natural convection technologies face limitations due to the development of a stagnant conductive layer and the suppression of turbulence near the heat exchanger tube. To address this, the study introduces a novel combination of Hybrid Multi-Walled Carbon Nanotube-Magnesium Oxide (MWCNT-MgO) nanofluid with a Diamond Fin Vortex Generator, aimed at enhancing turbulence and thermal conductivity for superior convective heat transfer. Through the disruption of coolant flow, a proposed Diamond Fin Vortex Generator improves heat transfer rates by disrupting boundary layer formation and promoting turbulent mixing to prevent stagnant fluid zones. Furthermore, the cutting-edge Hybrid Multi-Walled Carbon Nanotube-magnesium oxide Nano Coolant, which combines magnesium oxide nanoparticles with multi-walled carbon nanotubes, enhances thermal conductivity and simplifies preparation by eliminating the need for surfactants, thereby reducing risks associated with corrosion and scale formation. The proposed strategy is evaluated through numerical simulations in ANSYS CFD, exploring variations in fin heights and their impact on key metrics such as heat transfer coefficient, turbulence intensity, and pressure drop. The results show that the proposed model outperforms existing designs with a 28 % higher convective heat transfer coefficient and a 10.7 % improvement over standard elliptical annuli. The Hybrid MWCNT-MgO nanofluid achieves a thermal conductivity of 0.278 kW/mK and a 15 % increase in Nusselt number. This results in a surface temperature reduction to 25.8 °C at 1000 W/m2.

Tech Support

Original Source

DOI: https://doi.org/10.1016/j.csite.2025.106099

References

2021 - Effect of fin number and position on non-linear characteristics of natural convection heat transfer in internally finned horizontal annulus [Crossref]
2021 - Eccentricity optimization of an inner flat-tube double-pipe latent-heat thermal energy storage unit [Crossref]
2021 - Natural convection over vertical and horizontal heated flat surfaces: a review of recent progress focusing on underpinnings and implications for heat transfer and environmental applications [Crossref]
2023 - Numerical analysis of magneto-radiated annular fin natural-convective heat transfer performance using advanced ternary nanofluid considering shape factors with heating source
2022 - Investigation of a Delta wing Vortex generator
2020 - Natural convection heat transfer for adiabatic circular cylinder inside trapezoidal enclosure filled with nanofluid superposed porous-nanofluid layer
2021 - Heatline visualization of MHD natural convection heat transfer of nanofluid in a prismatic enclosure [Crossref]
2021 - Using finite volume method for simulating the natural convective heat transfer of nano-fluid flow inside an inclined enclosure with conductive walls in the presence of a constant temperature heat source [Crossref]
2020 - Experimental investigation of the horizontal double pipe heat exchanger utilized phase change material
2022 - Non-newtonian nanofluid natural convective heat transfer in an inclined half-annulus porous enclosure using FEM [Crossref]