Hydrodynamic characterization of Gyroid, Diamond and Split-P Triply Periodic Minimal Surfaces as porous medium
At a Glance
Section titled āAt a Glanceā| Metadata | Details |
|---|---|
| Publication Date | 2025-07-02 |
| Journal | International Journal of Heat and Mass Transfer |
| Authors | Eleonora Gajetti, Gianluca Boccardo, Luca Marocco |
| Citations | 2 |
Abstract
Section titled āAbstractāTriply Periodic Minimal Surfaces are gaining significant attention as engineered porous media for applications in fluid transport and thermal management systems due to their unique geometric properties. However, accurate prediction of pressure drop across TPMS structures remains a challenge, particularly in transitioning flow regimes. This study addresses this gap by investigating the hydrodynamic behavior of Gyroid, Diamond, and Split-P geometries using computational fluid dynamics simulations across a range of Reynolds numbers, from viscous to weakly inertial regimes. Two modeling frameworks were utilized: the Ergun equation, commonly used for packed beds, and the Darcy-Forchheimer equation, enhanced with newly developed correlations for permeability and inertial drag factor. An adapted Kozeny-Carman equation was also applied for permeability prediction. The developed correlations, expressed as power-law functions of porosity and tortuosity, demonstrated high accuracy, with relative errors below 10 % for most configurations and a maximum error of 21 % for the more complex Split-P1 geometry. Validation in larger-scale geometries, such as pipes filled with TPMS, confirmed the scalability and robustness of the proposed models, even when accounting for variations in the hydraulic diameter due to wall effects. The results demonstrate the superior suitability of the Darcy-Forchheimer equation with the developed permeability and inertial drag factor models, particularly for complex geometries like Split-P. In contrast, the Ergun equation fails to accurately predict pressure drop across the investigated TPMS, underscoring its limitations for these geometries. Furthermore, while the inclusion of tortuosity in the correlations provides additional detail, it does not offer significant advantages over the simpler permeability-porosity relation for any of the investigated TPMS, making the latter a more practical choice for design and optimization applications in systems such as heat sinks and porous flow devices
Tech Support
Section titled āTech SupportāOriginal Source
Section titled āOriginal SourceāReferences
Section titled āReferencesā- 2022 - Fluid flow and heat transfer of porous TPMS architected heat sinks in free convection environment [Crossref]
- 2023 - 3D fluid-structure simulation of innovative composites for the design and thermal management of electronic devices [Crossref]
- 2023 - Design, flow characteristics and performance evaluation of bioinspired heat exchangers based on triply periodic minimal surfaces [Crossref]
- 2023 - Characterisation of heat transfer within 3D printed TPMS heat exchangers [Crossref]
- 2022 - High performance, microarchitected, compact heat exchanger enabled by 3D printing [Crossref]
- 2022 - Nature-inspired triply periodic minimal surface-based structures in sheet and solid configurations for performance enhancement of a low-thermal-conductivity phase-change material for latent-heat thermal-energy-storage applications [Crossref]
- 2023 - Pore-scale numerical simulations on the lean concentration methane combustion in porous medium with gyroid triply periodic minimal surfaces structures
- 2022 - TPMS contactors designed with imprinted porosity: numerical evaluation of momentum and energy transport [Crossref]
- 2023 - Characterization of pressure drop through Schwarz-Diamond triply periodic minimal surface porous media [Crossref]