Optical and spin properties of nitrogen vacancy centers in diamond formed along high-energy heavy ion tracks
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2025-11-10 |
| Journal | Communications Materials |
| Authors | Wei Liu, Aleksi A. Leino, Arun Persaud, Qing Ji, Kaushalya Jhuria |
| Institutions | Lawrence Berkeley National Laboratory, University of Münster |
| Citations | 3 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Core Achievement: Direct formation of NV− (nitrogen-vacancy) color centers along 1 GeV heavy ion (Au/U) tracks in single-crystal diamond, producing quasi-1D spin chains for quantum registers and sensing.
- Material Innovation: Two-step formation process—electronic stopping creates GR1 (neutral vacancy) defects, which combine with native nitrogen during thermal annealing to yield dense NV− chains (15-20% conversion efficiency).
- Spin Performance Validation: Ensemble NV− centers in low-N diamond (~1 ppm) achieve T1 = 5.8 ± 0.2 ms, T2 = 48.1 ± 9.7 µs, and ESR (electron spin resonance) linewidth of 13.9 ± 0.1 MHz—superior to background signals.
- 1D Chain Demonstration: Isolated single 1D NV− chains (~30 µm long) with few-nm inter-NV spacing, potentially enabling >1000-qubit registers.
- Defect Engineering Insight: MD (molecular dynamics) simulations reveal a velocity-dependent vacancy clustering mechanism, with graphitization near the end of the ion range (~20-25 µm depth).
- Application Scope: Quantum information processing, wide-field magnetometry, fluorescent nuclear track detectors, and directional dark matter detection.
- Methodology Highlight: Confocal PL (photoluminescence) microscopy with refractive index correction (n = 2.4) for depth-resolved characterization combined with ODMR (optically detected magnetic resonance) for spin property quantification.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Diamond Type (Sample A/B) | Type IIa CVD (chemical vapor deposition) | — | Element 6, ~1 ppm nitrogen |
| Diamond Type (1D chain) | Type Ib HPHT (high-pressure high-temperature) | — | Element 6, <200 ppm nitrogen |
| Ion Species | Au, U | — | GSI UNILAC linear accelerator |
| Ion Energy (Au) | 0.95-1.0 | GeV | Electronic stopping regime |
| Ion Energy (U) | 1.1 | GeV | Electronic stopping regime |
| Electronic Stopping Power (U) | 49 | keV/nm | At diamond surface |
| Electronic Stopping Power (Au) | 40 | keV/nm | At diamond surface |
| Ion Range in Diamond | ~30 | µm | Both Au and U |
| High-Fluence Irradiation (Sample B) | 2.2 × 1012 | Au ions/cm2 | Ensemble formation |
| High-Fluence Irradiation (Sample A) | 1 × 1012 | U ions/cm2 | Ensemble formation |
| Dilute Fluence (1D Chains) | 1 × 108 | ions/cm2 | Single chain isolation |
| Annealing Step 1 | 800 °C, 1 h, vacuum (10−6 mbar) | — | GR1 → NV0 conversion |
| Annealing Step 2 | 1000 °C, 1 h, argon atmosphere | — | NV0 → NV− charge transfer |
| 1D Chain Annealing | 1000 °C, 1 h, vacuum (<10−4 mbar) | — | Single chain activation |
| Pre-implantation (Er) | 1 × 1013 cm−2, 180 keV | — | Surface reference marker |
| Confocal Lens NA | 0.95 | — | 100× magnification |
| Confocal Pinhole | 100 | µm | Spatial filtering |
| Excitation Laser | 532 | nm | Continuous wave |
| Refractive Index Correction | n = 2.4 | — | Depth scaling factor |
| NV− ZPL (zero phonon line) | 637 | nm | Optical signature |
| NV0 ZPL | 575 | nm | Optical signature |
| GR1 ZPL | ~741 | nm | Neutral vacancy signature |
| Surface N Accumulation (post-anneal) | ~1 × 1019 (~60 ppm) | cm−3 | Within 100 nm surface layer |
| Bulk N Concentration | ~3 × 1016 (0.2 ppm) | cm−3 | Consistent with supplier spec |
| ESR Contrast (SHI vs. background) | 2× enhancement | — | Ensemble measurement |
| ESR FWHM (full width at half maximum) (SHI ensemble) | 13.9 ± 0.1 | MHz | <100> orientation, 80 Gauss |
| ESR FWHM (Background ensemble) | 14.4 ± 0.2 | MHz | Reference comparison |
| ESR FWHM (1D chain) | 15.7 ± 0.5 | MHz | 70 Gauss, <001> orientation |
| Rabi Dephasing (Ensemble) | 0.53 ± 0.04 | µs | High-fluence SHI |
| Rabi Dephasing (1D chain) | 0.3 ± 0.1 | µs | Single chain |
| T1 Relaxation (Ensemble) | 5.8 ± 0.2 | ms | High-fluence SHI |
| T1 Relaxation (1D chain) | 12.6 ± 5.5 | µs | Single chain |
| T2 Coherence (Ensemble) | 48.1 ± 9.7 | µs | Hahn-echo sequence |
| T2* (Ensemble) | 2.4 ± 0.2 | µs | Free induction decay |
| T2* (1D chain) | 0.4 ± 0.2 | µs | Dense coupling regime |
| Vacancy Creation Rate (SRIM) | 0.26-0.34 | vacancies/nm | Direction-dependent ([100] vs. [110]) |
| MD Cluster Vacancy Density | 0-7 | nm−1 | Surface to 20 µm depth |
| MD Isolated Vacancy Density | 0.5-1 | nm−1 | Surface to 20 µm depth |
| N→NV Conversion Efficiency | 15-20 | % | 100 ppm diamond, 1 GeV Au |
Key Methodologies
Section titled “Key Methodologies”-
Substrate Selection:
- Type IIa CVD diamond (~1 ppm N) for ensemble studies.
- Type Ib HPHT diamond (<200 ppm N) for dense 1D chain formation.
-
Surface Reference Implantation:
- Er ions at 1 × 1013 cm−2, 180 keV (SRIM-estimated range: top 100 nm).
-
Swift Heavy Ion (SHI) Irradiation:
- Sample A: 1.1 GeV U ions, fluence 1 × 1012 cm−2.
- Sample B: 0.95 GeV Au ions, fluence 2.2 × 1012 cm−2.
- 1D Chain Sample: 1 GeV Au ions, dilute fluence 1 × 108 cm−2.
- Honeycomb mask (90% transparency) for direct irradiated/non-irradiated comparison.
-
Thermal Annealing Protocol:
- Step 1: 800 °C, 1 h, vacuum (10−6 mbar).
- Step 2: 1000 °C, 1 h, argon atmosphere.
- 1D chain sample: 1000 °C, 1 h, vacuum (<10−4 mbar).
-
Confocal PL Microscopy:
- 100× lens, NA 0.95.
- 532 nm CW laser excitation.
- 150 grooves/mm spectrometer + EMCCD (electron-multiplied charge-coupled device).
- Refractive index correction: z = n × zstage (n = 2.4).
-
ODMR Measurement Sequence:
- ESR: Continuous MW (microwave) + laser, field aligned to <001> or <100>.
- Rabi: Variable MW pulse duration, π/π/2 calibration.
- T1: Laser polarize → dark interval → readout, single-exponential fit.
- T2: Hahn-echo (π/2-τ-π-τ-π/2) sequence.
-
MD Simulation Framework:
- Two-temperature model, Tersoff potential.
- 23 × 23 × 11 nm3 slabs along 30 µm trajectory.
- 50 ps total simulation time.
- Wigner-Seitz analysis for defect classification.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”This research requires low-to-medium nitrogen-doped single-crystal diamond (SCD) with precisely controlled defect profiles. 6CCVD offers:
| Research Requirement | Recommended 6CCVD Material |
|---|---|
| Low-N ensemble (~1 ppm) | Optical Grade SCD with controlled nitrogen incorporation during CVD growth |
| High-N dense chains (<200 ppm) | Nitrogen-Rich SCD (Type Ib equivalent, MPCVD-grown) |
| Surface-confined NV layers | Thin SCD membranes (0.1-500 µm thickness) for subsurface engineering |
| Wide-field 2D NV sheets | Large-area SCD plates (up to 125 mm custom dimensions) |
Customization Potential
Section titled “Customization Potential”The paper demonstrates that precise control over nitrogen concentration, ion fluence, and annealing protocols is critical for tuning NV− density and spin coherence. 6CCVD supports this workflow with:
- Custom Nitrogen Doping: Tailored [N] from sub-ppm to >200 ppm during MPCVD growth to match your target NV density and chain spacing.
- Thickness Engineering: SCD wafers from 0.1 µm to 500 µm, enabling optimized ion penetration depth and optical access.
- Pre-Annealing Services: In-house vacuum and atmosphere-controlled furnaces (up to 1000 °C) for GR1→NV conversion protocols.
- Laser Cutting & Dicing: Post-growth shaping to isolate individual 1D chain devices or define mask apertures for patterned ion irradiation.
- Metalization Options: Ti, Pt, Au, Pd, W, Cu deposition for microwave antenna integration (loop antenna for ODMR) or electrode patterning for charge state control.
Engineering Support
Section titled “Engineering Support”6CCVD’s in-house PhD engineering team provides direct consultation for:
- Material Selection: Matching diamond grade (nitrogen concentration, crystal orientation) to your quantum sensing or register architecture.
- Process Integration: Guidance on pre-irradiation sample preparation, annealing parameter optimization, and surface passivation to minimize spin noise.
- Spin Property Optimization: Recommendations on isotopic purification pathways and surface termination to enhance T1, T2, and ESR contrast.
- Scalable Manufacturing: Transitioning from research-scale HPHT/CVD samples to wafer-scale production for quantum device arrays.
Whether you are replicating this SHI-induced NV chain architecture, engineering wide-field magnetometry sheets, or developing directional dark matter detectors, our team can specify the optimal diamond substrate geometry and defect profile for your application.
Call to Action
Section titled “Call to Action”For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract Exposure of matter to high-energy heavy ions induces defects along the ion trajectories through electronic and nuclear energy loss processes. Defects, including color centers, can recombine or form along latent damage tracks in semiconductors. Latent tracks in diamond were only recently observed. Here we report on color center formation in nitrogen-doped diamond along the latent tracks of 1 GeV gold and uranium ions. We optically observe direct formation of single vacancy related color centers (GR1-centers) along the tracks. Mobile vacancies can form NV-centers with native nitrogen atoms during thermal annealing. Molecular dynamics simulations show that isolated vacancies and vacancy clusters form through electronic stopping processes along ion trajectories. Moreover, by using 1 GeV Au ions with a dilute fluence, we create individually isolated quasi-1D chains of NV-centers, which appear as isolated bright luminescence strings and present competitive electron spin properties compared to a background of NV-centers. Such spin textures can be building blocks for applications in quantum sensing and computing.