Recent Developments and Challenges of Edge Termination Techniques for Vertical Diamond Schottky Barrier Diodes
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2025-11-14 |
| Journal | Sensors |
| Authors | Genzhuang Li, Lin Wang, Sha Bin Liu, Yeldos Aileplanm, Aochen Du |
| Institutions | Jilin University, Yili Normal University |
| Citations | 2 |
| Analysis | Full AI Review Included |
Technical Documentation: Edge Termination Techniques for Vertical Diamond Schottky Barrier Diodes
Section titled “Technical Documentation: Edge Termination Techniques for Vertical Diamond Schottky Barrier Diodes”Executive Summary
Section titled “Executive Summary”- Application Domain: High-power diamond Schottky barrier diodes (SBDs) — critical components for next-generation power electronics, renewable energy inverters, rail traction, and grid systems.
- Material System: Boron-doped p-type diamond (p− drift layer / p+ substrate) — the only mature doping route in diamond, with widely adjustable concentration and high hole mobility.
- Core Challenge Addressed: Electric field crowding at Schottky electrode edges causes premature breakdown, capping device performance far below diamond’s theoretical limit (10 MV/cm). Most reported devices operate below 5 MV/cm.
- Key Technical Pathways: Field plates (FP), guard rings (GR), high-resistance ion-implanted regions, MESA terminations, trench MOS barrier Schottky (TMBS), heterojunction junction termination extensions (JTE) with n-Ga2O3, and Junction Barrier Schottky (JBS/MPS) designs.
- Best Reported Performance: Zr/oxidized-diamond quasi-vertical SBD with breakdown field > 7.7 MV/cm (Traoré et al. 2014); diamond/ε-Ga2O3 heterojunction PN diode with VBD > 3000 V (Zhang et al. 2024).
- Wafer-Scale Driver: Recent availability of 2+ inch single-crystal diamond via mosaic growth and heteroepitaxy is enabling industrialization of vertical (vs. lateral) device architectures.
- Process Difficulty Ranking (low → high): FP → metal GR → etched MESA → high-resistance GR → JTE/JBS — limited by etching rate, ion implantation damage, and lack of native n-type diamond.
Technical Specifications
Section titled “Technical Specifications”Table 1: Reported Edge Termination Performance (Diamond SBDs)
Section titled “Table 1: Reported Edge Termination Performance (Diamond SBDs)”| Termination Type | Drift Layer (nm) | Doping Conc. (cm−3) | SBH (eV) | Ron (mΩ·cm2) | VBD (V) | Ref. |
|---|---|---|---|---|---|---|
| Field plate | 500 | 2.69 × 1015 | 1.65 | 1.31 | 185 | [23] |
| Metal guard ring | 530 | 2.83 × 1015 | 1.42 | — | 109 | [28] |
| Dual barrier (O/F) | 200 | — | 2.39 | — | 66.4 | [29] |
| F ion implantation | 350 | 0.91 × 1015 | 1.14 | 50 | 117 | [30] |
| B ion implantation | 310 | 1.0 × 1015 | — | 1.2 | 126 | [31] |
| N-doped diamond layer | 500 | 7.34 × 1014 | 1.28 | 3.16 | 112 | [32] |
| Beveled MESA + HfO2 FP | 1000 | 8.77 × 1015 | 1.52 | 3.0 | 380 | [35] |
| TMBS (trench) | 1000 | 3.45 × 1015 | 1.21 | 5.6 | 265 | [37] |
| Ga2O3/Diamond JTE PND | — | — | — | — | > 3000 | [48] |
Table 2: Key Material & Electrical Benchmarks
Section titled “Table 2: Key Material & Electrical Benchmarks”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Bandgap (diamond) | 5.47 | eV | Wide bandgap semiconductor |
| Critical electric field (theory) | 10 | MV/cm | Diamond material limit |
| Typical operating E-field (current SBDs) | < 5 | MV/cm | Limited by crystalline quality |
| Thermal conductivity (diamond) | > 2000 | W/m·K | Heat dissipation advantage |
| Hole mobility (p-diamond) | High | cm2/V·s | Enables low Ron |
| (113) P-doping efficiency vs. (100) | 1-2 orders higher | — | N-type doping enabler |
| P-formation energy ordering | (113) < (111) < (110) < (100) | — | First-principles calculation |
| Reported SCD wafer size | > 2 (approaching 4) | inch | Mosaic/heteroepitaxy growth |
| (113) homoepitaxial SCD area | 3.7 × 3.7 | mm | Achard 2024 |
Table 3: Schottky Metal Selection — Reported Results
Section titled “Table 3: Schottky Metal Selection — Reported Results”| Metal | Year | Operating Temp. (°C) | Key Result | Ref. |
|---|---|---|---|---|
| Si | 1997 | 1000 | Rectification ratio 10; low VBD | [13] |
| Zr | 2014 | RT | 103 A/cm2 @ 6 V; E-field > 7.7 MV/cm | [14] |
| Pt | 2015 | 25-200 | Forward current > 10 A; Vf 3.5 V → < 1 V | [15] |
| Cu | 2015 | 400 | Ron 83.4 mΩ·cm2; VBD 713 V | [16] |
| Ti | 2022 | RT | Rectification 3.6 × 105; VBD 1650 V | [17] |
Key Methodologies
Section titled “Key Methodologies”- Substrate Selection: Large-size (100) homoepitaxial SCD substrate with p+ boron-doped layer; (113) and (111) substrates under investigation for higher n-type doping efficiency.
- Drift Layer Growth: CVD homoepitaxy of lightly boron-doped p-type layer (1014-1016 cm−3); thickness 200-1000 nm depending on target VBD.
- Vertical Device Fabrication: Quasi-vertical architecture uses dry etching (O2/Ar plasma) to expose p+ layer for ohmic contact formation.
- Edge Termination Implementation (4 main approaches):
- Field Plate (FP): Deposit dielectric (Al2O3, HfO2, SnO2) overlapping the Schottky electrode; high-κ dielectrics (ε > 10) preferred for uniform field distribution.
- Guard Rings (GR): Floating metal rings around Schottky electrode; ring width and spacing optimized for gradient depletion.
- High-Resistance Region: F or B ion implantation creates deep-level defects; nitrogen-doped selective growth is an alternative.
- MESA / TMBS: Inductively coupled plasma (ICP) dry etching to form trench structures; filled with dielectric or polyimide (PI, ε ≈ 3).
- Heterojunction JTE: Magnetron sputtering of n-Ga2O3 or pulsed laser deposition of Sn-doped ε-Ga2O3 on boron-doped diamond forms PN heterojunction.
- Surface Termination Engineering: Oxygen termination (O-term) for low Schottky barrier (~2.0 eV); fluorine termination (F-term) for wider depletion and lower leakage (~2.39 eV).
- Characterization: Current-voltage (I-V) measurements across 25-400 °C; rectification ratio and ideality factor extraction; capacitance-voltage (C-V) profiling.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”The referenced research directly maps to the following 6CCVD product lineup:
- Optical/Electronic Grade SCD (Single Crystal Diamond): For both (100) and emerging (113)/(111) orientation substrates required for advanced vertical SBDs. Our SCD thickness range (0.1 µm - 500 µm) supports drift layer optimization.
- Boron-Doped Single Crystal Diamond (BDD): Precision-controlled p-type doping enables the p− drift layer (1014-1016 cm−3) and p+ substrate layers essential for SBD architecture.
- Boron-Doped Polycrystalline Diamond (PCD): Cost-effective alternative for lateral and quasi-vertical SBDs; available up to 125 mm plate format for wafer-scale processing.
- Heavy Boron-Doped PCD: For low-resistance p+ contact layers and ohmic electrode formation.
Customization Potential
Section titled “Customization Potential”- Custom Metalization (Internal Capability): The paper cites Zr, Pt, Cu, Ti, Mo, Au Schottky contacts and Ti/Pt/Au ohmic stacks. 6CCVD offers internal deposition of Au, Pt, Pd, Ti, W, and Cu — covering every Schottky/ohmic combination referenced, including high-temperature Pt and work-function-engineered Zr/Mo systems.
- Laser Cutting & Dicing: Custom chip dimensions and MESA geometries (e.g., 100 µm diameter JBS mesas, trench TMBS structures) can be precision-machined to your device layout.
- Surface Termination: O-term and F-term variants can be specified at wafer level, supporting the dual-termination Schottky barrier diode architecture (Zhao et al. 2018).
- Wafer-Scale Supply: PCD plates up to 125 mm and SCD wafers approaching 2+ inches align with the paper’s emphasis on industrialization-ready substrates.
Engineering Support
Section titled “Engineering Support”- 6CCVD’s in-house PhD engineering team can assist with material selection across the full vertical SBD stack — from p+ substrate choice through drift layer specification, surface termination chemistry, and metalization stack design.
- For FP-terminated SBDs, we can supply SCD with Ra < 1 nm surface finish — critical for uniform dielectric deposition and low interface trap density.
- For ion-implanted termination structures (F/B implantation), we can provide lattice-engineered substrates optimized to minimize post-implantation leakage and annealing damage recovery.
- For (113)/(111) experimental orientations, consultation is available for emerging n-type doping research and bipolar diamond device prototyping.
Call to Action
Section titled “Call to Action”The performance ceiling of diamond power electronics is no longer set by materials availability — it is set by how precisely your termination structure interfaces with the diamond crystal. 6CCVD delivers that precision, from atomically polished SCD to fully metalized, laser-cut device-ready wafers.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Thanks to its excellent material properties, diamond-based power electronic devices have garnered widespread attention. The realization of large-sized (over 2 inches) and high-quality single-crystal diamond wafers has significantly accelerated the industrialization of diamond semiconductor materials and devices. Over years of development, diamond Schottky barrier diodes (SBDs) have evolved into three primary device structures: lateral conduction type, quasi-vertical conduction type, and vertical conduction type. However, the performance of these devices has yet to fully unlock the potential of diamond materials. Efficient edge termination structures need to be designed to synergistically optimize the forward turn-on voltage, on-resistance, and off-state breakdown voltage. This paper reviews the research progress on various existing edge termination structures of diamond SBDs, analyzes the advantages of each structure, and discusses the key challenges faced in the device fabrication processes.
Tech Support
Section titled “Tech Support”Original Source
Section titled “Original Source”References
Section titled “References”- 2024 - A Future Outlook of Power Devices From the Viewpoint of Power Electronics Trends [Crossref]
- 2024 - Switching figure-of-merit, optimal design, and power loss limit of (ultra-) wide bandgap power devices: A perspective [Crossref]
- 2016 - Single crystal diamond wafers for high power electronics [Crossref]
- 2024 - Vertical β-Ga2O3 Power Diodes: From Interface Engineering to Edge Termination [Crossref]
- 2024 - From wide to ultrawide-bandgap semiconductors for high power and high frequency electronic devices [Crossref]
- 2021 - Two-inch high-quality (001) diamond heteroepitaxial growth on sapphire (112¯0) misoriented substrate by step-flow mode [Crossref]
- 2023 - Effect of step-flow modulation on the large-size single crystal diamond through mosaic growth [Crossref]
- 2025 - Interfacial improvement of Ir/MgO substrate by post-deposition annealing for heteroepitaxial growth of single crystal diamond [Crossref]
- 2018 - Recent advances in diamond power semiconductor devices [Crossref]