Skip to content

Characterization of low-nitrogen quantum diamond for pulsed magnetometry applications

MetadataDetails
Publication Date2025-12-09
JournalFrontiers in Quantum Science and Technology
AuthorsJiashen Tang, Connor Roncaioli, Andrew M. Edmonds, Atli Davidsson, Connor Hart
InstitutionsElement Six (United Kingdom), Joint Quantum Institute
AnalysisFull AI Review Included
  • Material Innovation: Low-nitrogen ([Ns0] ≈ 0.8 ppm) CVD diamond engineered specifically for pulsed NV ensemble magnetometry, contrasting with conventional high-nitrogen (~14 ppm) sensing material.
  • Growth Methodology: Microwave-plasma-assisted CVD on low-dislocation, isotopically enriched (12C >99.99%) single-crystal diamond substrates with controlled substrate temperature, CH4/H2 ratio, and N2 concentration.
  • Defect Engineering: Controlled electron irradiation at 1.5 MeV (~4.8 × 1017 cm-2) followed by annealing at 1,200°C for 2 h achieves ~50% [Ns0]-to-NV conversion, yielding [NV] ≈ 0.39 ppm.
  • Spin Performance: Single-quantum NV ensemble dephasing time T2*,SQ = 17.5 ± 1.0 µs, closely approaching the theoretical spin-bath limit of ~20 µs without requiring double-quantum protocols.
  • Strain Homogeneity: Average birefringence (Δn) between 2.6 × 10-6 and 5.2 × 10-6 across ten samples; strain-limited T2* ≈ 10-20 µs (full sample vs. ~500 µm sub-region).
  • Sensitivity Benchmark: Estimated ~3× sensitivity improvement over high-[Ns0] diamond at moderate-to-low optical excitation intensities (< 0.03 mW/µm2).
  • Application Advantage: Optimized for size, weight, power, and cost (SWaP-C) constrained platforms and low-phototoxicity biological sensing scenarios.
ParameterValueUnitContext
Neutral substitutional nitrogen [Ns0]0.73-0.88ppmMeasured via UV-Vis absorption prior to irradiation
12C isotopic enrichment>99.99%Methane source enrichment
13C enrichment assumption99.995%Reference for sensitivity modelling
Substrate dimensions3.5 × 3.5 × 0.3mm3CVD single-crystal, low-nitrogen ([Ns0] ≤ 1 ppm)
Growth layer thickness~1.2mmLaser-sliced from substrate
Final processed plate area3 × 3mm2Central retained region
Final sample thickness~500µm5× thicker than prior high-[Ns0] samples
Electron irradiation energy1.5MeVElectron beam
Irradiation dose~4.8 × 1017cm-2Targeting ~50% Ns0-to-NV conversion
Annealing final temperature1,200°C2 h duration, controlled ramp
Post-treatment [NV] concentration~0.39 (± 0.02)ppmMeasured via UV-Vis absorption
Average optical birefringence Δn2.6 × 10-6 - 5.2 × 10-6(dimensionless)Measured at 590 nm wavelength
Measured T2*,SQ (confocal)17.5 ± 1.0µsAverage at three low-birefringence locations
Theoretical T2* spin-bath limit~20µsCalculated from nitrogen and 13C content
Strain-limited T2* (full sample)~10µsFWHM Δ ≈ 31 kHz
Strain-limited T2* (~500 µm region)~20µsFWHM Δ ≈ 15 kHz
Wide-field laser wavelength532nmODMR strain mapping, ~1 W, cylindrical focus
Confocal laser waist diameter~15µmUnderfilled 0.75NA, 20× objective
Confocal pinhole diameter~6µmPL collection depth ~10 µm
Optical excitation intensity range10-3 - 101mW/µm2Controllably varied
Rabi frequency~5MHzCoaxial loop microwave delivery
Wide-field bias magnetic field~50GPermanent magnet pair, all 4 NV orientations resolved
Confocal bias magnetic field~20GAligned along single NV axis
NV0/NV- PL intensity ratio~2.5×(ratio)NV0 dimmer than NV-
Spectral filter cutoff647nm (long-pass)NV0 PL suppression
Charge-state determination filter550nm (long-pass)Spectral decomposition analysis
Assumed photon emission rate30kcps/NVAt 1 mW/µm2 illumination
Improvement vs. high-[Ns0] (CW methods)~3×(ratio)At moderate-to-low excitation intensity
Sensitivity crossover intensity~0.03mW/µm2Low-[Ns0] advantage threshold
  1. Substrate Selection: CVD single-crystal diamond substrates with [Ns0] ≤ 1 ppm and low birefringence, {100} surfaces prepared by standard scaife mechanical polishing.
  2. CVD Growth: Microwave-plasma-assisted CVD at controlled substrate temperature, CH4/H2 ratio, and N2 concentration; methane isotopically enriched with 12C >99.99%. Extended ~1.2 mm growth with conditions optimized to avoid non-epitaxial crystallites and edge twinning.
  3. Laser Slicing and Plate Processing: Newly grown layers laser-sliced to detach from substrates; only the central 3 × 3 mm2 region retained to avoid edge-dislocation propagation.
  4. Electron Irradiation: 1.5 MeV electron beam at estimated dose ~4.8 × 1017 cm-2, targeting approximately 50% [Ns0]-to-NV conversion.
  5. Thermal Annealing: Controlled ramp profile with final hold at 1,200°C for 2 h to mobilize vacancies and form NV centers.
  6. Wide-Field Strain Mapping: CW-ODMR with 532 nm elliptical illumination (~10 mm × ~700 µm), 0.1NA 4× collection objective, GPU-accelerated pixel-by-pixel Hamiltonian fitting across all four NV orientations.
  7. Confocal Spin and Charge Characterization: 532 nm excitation focused through 0.75NA 20× objective; 6 µm pinhole restricts collection volume; coax-loop microwave delivery; charge-state decomposition via PL spectral fitting.
  8. Ramsey Measurements: Single-quantum (SQ) protocols with detuned microwave frequency to separate hyperfine beating from the decay envelope.

The material described in this work—low-strain, low-nitrogen CVD single-crystal diamond with 12C isotopic enrichment and controlled NV-defect conversion—aligns directly with 6CCVD’s Optical Grade SCD and Quantum Grade SCD product families. The target concentration of [Ns0] ≈ 0.8 ppm with [NV] ≈ 0.39 ppm after irradiation/annealing is achievable through custom [Ns0] specification in our MPCVD reactors, with optional isotopic enrichment sourcing available upon request. For experiments requiring higher NV-density ensembles (~14 ppm nitrogen), our high-[Ns0] calibration-grade SCD provides a matching reference baseline.

  • Geometry: Although the study uses 3 × 3 mm2 plates, 6CCVD routinely delivers SCD and PCD substrates up to 125 mm diameter for PCD and equivalent dimensions for SCD, with thickness control from 0.1 µm to 500 µm (SCD/PCD) and up to 10 mm for substrates.
  • Laser Processing: Laser slicing and precision cutting are core services. We can accommodate central-region retention protocols and perimeter exclusion zones to avoid edge-dislocation propagation, as required in this work.
  • Polishing Specs: For wide-field strain mapping sensitivity, 6CCVD’s SCD polishing specification provides Ra < 1 nm, supporting the low-subsurface-damage scaife or alternative polishing routes referenced in the paper. We can also support custom chemo-mechanical polishing for dislocation-density reduction.
  • Pre-Irradiation/Annealing Coordination: 6CCVD can supply material in the as-grown state, post-polishing state, or post-irradiation/annealing state—depending on whether in-house defect treatment is preferred.
  • Metallization: For devices requiring integrated microwave delivery structures, coplanar waveguides, or resonator fabrication, 6CCVD provides in-house Ti, W, Au, Pt, Pd, and Cu metallization, compatible with the loop-gap resonator and coaxial microwave delivery architectures referenced in this study.

Reproducing this NV ensemble magnetometry study—or extending it to double-quantum protocols, spin-bath driving techniques, or pulse sequences such as DROID or CORPSE—requires careful matching of substrate quality, growth strain, [Ns0] specification, and NV conversion yield. 6CCVD’s in-house PhD engineering team can assist with material selection across the [Ns0] range from sub-ppm to >100 ppm, growth geometry optimization for minimizing strain, and downstream integration planning including surface preparation, annealing atmosphere selection, and microwave-compatible metallization stack design.

Recommended starting configurations for replication or scaling:

Application Scenario6CCVD Recommendation
Low-[Ns0] pulsed magnetometry (this study)SCD, [Ns0] < 1 ppm, 12C enrichment available, post-processed to spec
High-[Ns0] CW-ODMR baselineSCD, [Ns0] ~14 ppm, as-grown or irradiated
Large-area imaging / wide-field magnetometryPCD up to 125 mm, < 5 nm Ra polish
Integrated MW resonator / packaged sensorCustom metallization (Ti/Au, Ti/Pt/Au) + laser dicing

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Ensembles of nitrogen-vacancy (NV) centers in diamond are versatile quantum sensors with broad applications in the physical and life sciences. The concentration of neutral substitutional nitrogen ( <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m1”> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mo>[</mml:mo> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> </mml:math> ]) strongly influences NV electronic spin coherence times, sensitivity, and optimal sensing strategies. Diamonds with <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m2”> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mo>[</mml:mo> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> </mml:math> ] <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m3”> <mml:mrow> <mml:mo>∼</mml:mo> </mml:mrow> </mml:math> 1-10 ppm are a focus of recent material engineering efforts, with higher concentrations being favorable for continuous-wave optically detected magnetic resonance (CW-ODMR) and lower concentrations expected to benefit pulsed magnetometry techniques through extended NV spin coherence times and improved sensing duty cycles. In this work, we synthesize and characterize low- <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m4”> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mo>[</mml:mo> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> </mml:math> ] ( <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m5”> <mml:mrow> <mml:mo>∼</mml:mo> </mml:mrow> </mml:math> 0.8 ppm), NV-enriched diamond material, engineered through low-strain chemical vapor deposition (CVD) growth on high-quality substrates, 12 C isotopic purification, and controlled electron irradiation and annealing. Our results demonstrate good strain homogeneity in diamonds grown on CVD substrates and spin-bath-limited NV dephasing times. By measuring NV spin and charge properties across a wide range of optical NV excitation intensity, we provide direct comparisons of photon-shot-noise-limited magnetic field sensitivity between the current low- <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m6”> <mml:mrow> <mml:mo stretchy=“false”>[</mml:mo> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> <mml:mo stretchy=“false”>]</mml:mo> </mml:mrow> </mml:math> and previously studied higher- <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m7”> <mml:mrow> <mml:mo stretchy=“false”>[</mml:mo> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> <mml:mo stretchy=“false”>]</mml:mo> </mml:mrow> </mml:math> ( <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m8”> <mml:mrow> <mml:mo>∼</mml:mo> </mml:mrow> </mml:math> 14 ppm) NV-diamond sensors. We show that low- <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m9”> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mo>[</mml:mo> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> </mml:math> ] diamond can outperform higher- <mml:math xmlns:mml=“http://www.w3.org/1998/Math/MathML” id=“m10”> <mml:mrow> <mml:msubsup> <mml:mrow> <mml:mo>[</mml:mo> <mml:mtext>N</mml:mtext> </mml:mrow> <mml:mrow> <mml:mtext>s</mml:mtext> </mml:mrow> <mml:mrow> <mml:mn>0</mml:mn> </mml:mrow> </mml:msubsup> </mml:mrow> </mml:math> ] diamond at moderate and low optical NV excitation intensity. Our results provide practical benchmarks and guidance for selecting NV-diamond sensors tailored to specific experimental constraints and sensing requirements.

  1. 2019 - Photoluminescence decomposition analysis: a technique to characterize N-v creation in diamond [Crossref]
  2. 2023 - Quantum logic enhanced sensing in solid-state spin ensembles [Crossref]
  3. 2013 - Photo-induced ionization dynamics of the nitrogen vacancy defect in diamond investigated by single-shot charge state detection [Crossref]
  4. 2023 - Quantum sensors for biomedical applications [Crossref]
  5. 2020 - Microwave-assisted spectroscopy technique for studying charge state in nitrogen-vacancy ensembles in diamond [Crossref]
  6. 2016 - Optical magnetic detection of single-neuron action potentials using quantum defects in diamond [Crossref]
  7. 2020 - Sensitivity optimization for NV-diamond magnetometry [Crossref]
  8. 2024 - Sensitive ac and dc magnetometry with nitrogen-vacancy-center ensembles in diamond [Crossref]
  9. 2018 - Ultralong dephasing times in solid-state spin ensembles via quantum control [Crossref]
  10. 2021 - Characterisation of CVD diamond with high concentrations of nitrogen for magnetic-field sensing applications [Crossref]