Fabrication and Photoluminescence Studies of Tin-VacancyCenters in Chemical Vapor Deposition Diamond
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2025-12-03 |
| Journal | Figshare |
| Authors | Rani Mary Joy (17381812), Miquel Cherta Garrido (22765135), Omar J. Y. Harb (19501283), Hendrik Jeuris (22765138), Rozita Rouzbahani (17709420) |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Objective: Fabrication and photoluminescence (PL) characterization of Tin-Vacancy (SnV) color centers in chemical vapor deposition (CVD) diamond for quantum photonic applications.
- Substrates Used: Two distinct material platforms were evaluated — (100)-oriented silicon (5 mm × 5 mm × 0.5 mm) and free-standing polished microcrystalline diamond (MCD) discs (3 mm diameter × 1 mm thickness).
- Surface Quality: MCD substrates exhibited sub-20 nm roughness; polished MCD discs achieved sub-0.5 nm mean roughness, demonstrating the requirement for ultra-smooth interfaces to optically resolve single emitters.
- Optical Method: Confocal PL mapping with a 532 nm excitation source (1 mW at room temperature, 10 mW at cryogenic temperatures) targeting the SnV zero-phonon line (ZPL) near 620 nm.
- Cryogenic Conditions: PL measurements performed at a base temperature of 7.5 K using an attoDRY800 helium-flow optical cryostat with sub-micrometer piezoelectric positioning.
- Computational Component: DFT-based (PBE + HSE06) modeling of the SnV split-vacancy configuration in 4×4×4 (512 atoms) and 5×5×5 (1000 atoms) supercells to predict ZPL behavior under hydrostatic pressure (−7.7 to +9.6 GPa).
- Core Value: Establishes a reproducible CVD-diamond recipe and characterization protocol for SnV centers, a leading candidate for scalable quantum memories and spin-photon interfaces.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Si substrate dimensions | 5 × 5 × 0.5 | mm × mm × mm | (100)-oriented CVD diamond growth platform |
| MCD substrate diameter | 3 | mm | Free-standing polished disc |
| MCD substrate thickness | 1 | mm | Bulk substrate format |
| MCD mean surface roughness | < 0.5 | nm | Polished free-standing MCD |
| MCD as-grown roughness | < 20 | nm | Pre-polish reference |
| Nanodiamond seed particle size | 4-5 | nm | Detonation seeding source |
| EDX accelerating voltage | 12.5 | kV | SEM elemental analysis |
| EBSD penetration depth | tens of | nm | Surface crystallographic orientation |
| Raman excitation wavelength | 532 | nm | Confocal Raman microscope |
| PL excitation wavelength | 512 | nm | Room temperature mapping |
| Room-temp PL laser power | 1 | mW | Quantum Gem laser |
| Cryo PL excitation wavelength | 532 | nm | CNI MGL-FN-532 CW laser |
| Cryo PL laser power | 10 | mW | Cryogenic mapping |
| Objective NA (room temp) | 0.95 | — | High-NA focusing |
| Objective magnification / NA (cryo) | 100× / 0.70 | — | Cryo confocal configuration |
| SnV ZPL filter center | 620 ± 2 | nm | Thorlabs FB620-10 bandpass |
| Filter FWHM | 10 ± 2 | nm | PL detection path |
| Cryostat base temperature | 7.5 | K | attoDRY800 He-flow |
| Positioner precision | sub-µm | — | Piezoelectric XYZ mapping |
| Sn-C bond length (neutral) | 2.1034 - 2.1024 | Å | DFT PBE optimized |
| Sn-C bond length (negatively charged) | 2.1028 - 2.1010 | Å | DFT PBE optimized |
| SnV defect volume (neutral) | ~22.74 - 22.78 | ų | 4×4×4 and 5×5×5 cells |
| SnV defect volume (charged) | ~29.59 | ų | 4×4×4 and 5×5×5 cells |
| Simulated pressure range | −7.7 to +9.6 | GPa | PBE level strain sweep |
| HSE06 pressure range | −0.4 to −17.8 | GPa | Hybrid functional sweep |
| Relaxation energy (PBE) | 30-40 | meV | Excited-state geometry relaxation |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation (Si): Oxygen plasma clean → detonation nanodiamond seeding (4-5 nm particles) → DI water rinse → spin-dry.
- Substrate Preparation (MCD): Acetone ultrasonication (10 min) → boiling H2SO4 + KNO3 (1:1, 1 hr) → DI rinse → N2 dry.
- Diamond Growth: Microwave plasma-enhanced CVD (MW PECVD) on both Si and MCD substrates; conditions referenced from prior phosphorus-doped diamond studies.
- Room-Temperature PL Mapping: 512 nm excitation at 1 mW; 0.95 NA objective; 620 ± 2 nm bandpass filter for SnV ZPL isolation.
- Cryogenic PL Mapping: 532 nm CW laser at 10 mW; 100× / 0.70 NA objective in confocal geometry; Andor Shamrock 750 + Newton EMCCD detection; 7.5 K base temperature; piezo XYZ spatial mapping.
- Morphological Characterization: SEM (Quanta 200 FEG), EDX at 12.5 kV, and EBSD for grain orientation; Raman spectroscopy at 532 nm for sp3/sp2 quality assessment.
- DFT Modeling: VASP with PAW pseudopotentials; PBE geometry optimization → HSE06 electronic structure on 4×4×4 (512-atom) and 5×5×5 (1000-atom) supercells; Γ-only k-point sampling.
- Defect Construction: Two neighboring C atoms replaced by one Sn atom; relaxed into the split-vacancy configuration.
- Strain Simulation: Hydrostatic lattice parameter variation of ±1%, ±2%; fixed-volume, fixed-shape relaxations; fit to Rose-Vinet equation of state.
- Charge Analysis: Iterative Hirshfeld-I atoms-in-molecules partitioning for atomic and cumulative defect charges.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”-
Applicable Materials:
- For replication of the MCD disc substrates used in this study, 6CCVD’s Optical-Grade Polycrystalline Diamond (PCD) is the direct match — offered in thicknesses from 0.1 µm to 500 µm and bulk substrate formats up to 10 mm, readily laser-cut to 3 mm disc geometries.
- For future extension toward single-emitter resolution and lower background luminescence, 6CCVD’s Single Crystal Diamond (SCD) — polished to Ra < 1 nm — provides the ideal low-strain, low-defect-density host matrix for isolated SnV (or related Group-IV) centers.
- For devices requiring in-situ electrical gating or charge-state control of color centers, Boron-Doped Diamond (BDD) is available across the doping spectrum from light to heavy concentrations.
-
Customization Potential:
- The paper’s 5 mm × 5 mm Si platform and 3 mm × 1 mm MCD discs fall well within 6CCVD’s custom dimensional range; PCD wafers up to 125 mm can be supplied for scaled-up photonic integration.
- All substrates can be finished to sub-5 nm Ra on inch-scale PCD and sub-1 nm Ra on SCD — directly addressing the sub-0.5 nm surface requirement for cryogenic confocal PL.
- In-house metallization (Ti, Pt, Au, Pd, W, Cu) enables fabrication of microwave striplines, bond pads, or photonic device contacts on the same diamond host, supporting integrated spin-photon interface architectures.
- Precision laser cutting and dicing accommodate non-standard footprints (e.g., 3 mm discs, 5 mm chips) without post-processing contamination.
-
Engineering Support:
- 6CCVD’s in-house PhD engineering team can advise on substrate selection (SCD vs. PCD vs. BDD), seeding density optimization, and polishing specifications tailored to SnV / GeV / SiV color-center quantum photonics projects.
- Material consultation is available for strain-engineered ZPL tuning — directly relevant to the DFT strain-sweep methodology reported in this work.
-
Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Group IV color centers in diamond are promising single-photon emitters for quantum information processing and networking. Among them, the tin-vacancy (SnV) center stands out due to its long spin coherence times at cryogenic temperatures above 1 K. While SnV centers have been realized using various fabrication routes, their in situ formation via microwave plasma-enhanced chemical vapor deposition (MW PE CVD) remains relatively unexplored. In this study, SnV centers, identified by a zero-phonon line (ZPL) near 620 nm, were synthesized in nanocrystalline diamond and free-standing microcrystalline diamond using tin oxide (SnO<sub>2</sub>) as a dopant source at substrate temperatures of 750°C and 850°C. Photoluminescence measurements reveal that lowering the substrate temperature enhances both the ZPL intensity and spatial uniformity of SnV centers. These results highlight substrate temperature as a key parameter for controlling SnV incorporation during MW PE CVD growth and provide insights into optimizing fabrication strategies for diamond-based quantum technologies.