Greener Catalytic Oxidation of Azole Fungicides - Coupling EO–O3 on BDD with Kinetics and Mineralization Targets
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2025-12-03 |
| Journal | Catalysts |
| Authors | Joaquín R. Dominguez, T. González, David Simón-García |
| Institutions | Universidad de Extremadura |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Objective: Decouple and optimize the coupled electro-oxidation (EO) and ozonation (O3) process for degrading a four-azole fungicide mixture (prochloraz, tebuconazole, tetraconazole, penconazole).
- Anode Material: Boron-Doped Diamond (BDD) — 5 cm × 8 cm flat plate, 40 cm2 active area, paired with an AISI 304 stainless-steel cathode at a 25 mm inter-electrode gap.
- Statistical Framework: Central Composite Design (CCD) with three coded factors (A = current, B = electrolyte, C = ozone) modeling three responses: abatement (%), pseudo-first-order rate constant k (min−1), and TOC removal (%).
- Dominant Drivers: Gas-phase O3 concentration is the strongest positive lever for abatement and kinetics; current exhibits curvature-limited diminishing returns (negative A2 term).
- Inhibitory Effect: Na2SO4 electrolyte has a statistically significant negative effect on TOC removal due to •OH scavenging by SO42−.
- Optimum Operating Window: Current ≈ 115-135 mA, electrolyte ≈ 1-3 mM, O3 ≈ 7-8 ppm — balancing 33.78% TOC removal with SEC of 1.825 kWh·m−3.
- Process Verdict: EO-O3 is best positioned as a pre-oxidation or polishing step to enhance biodegradability, not as a stand-alone total mineralization technology.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| BDD Anode Dimensions | 5 × 8 | cm | Flat-plate electrode, 40 cm2 active area |
| Inter-Electrode Gap | 25 | mm | BDD anode to AISI 304 SS cathode |
| Working Volume | 0.40 | L | Jacketed glass batch reactor |
| Operating Temperature | 20.0 ± 0.5 | °C | Thermostated reactor |
| Initial pH | 6.1 | — | Natural pH (no adjustment) |
| Target Concentration (each azole) | 5 | ppm | 20 ppm total mixed azole load |
| Current Range (CCD) | 101 ± 60 (≈ 0-161) | mA | Galvanostatic mode |
| Electrolyte Range (Na2SO4) | 13 ± 7.14 (≈ 1-25) | mM | Supporting electrolyte |
| Gas-Phase O3 Range | 5.5 ± 2.7 (≈ 1-10) | ppm | Inlet ozone dosage |
| O2/O3 Flow Rate | 20 | L·h−1 | Through porous diffuser |
| O3 Utilization Efficiency | 90-95 | % | Optimized EO-O3 conditions |
| Kinetic Window | 10 | min | Pseudo-first-order regime |
| Mineralization Window | 60 | min | TOC plateau region |
| Abatement R² | 0.855 | — | Quadratic model fit |
| k (kinetic) R² | 0.857 | — | Quadratic model fit |
| TOC Removal R² | 0.836 | — | Quadratic model fit |
| Optimum Current | 116 | mA | Constrained optimum |
| Optimum Electrolyte | 0.992 | mM | Near conductivity threshold |
| Optimum O3 | 7.09 | ppm | Gas-phase concentration |
| Max TOC Removal (Optimum) | 33.78 | % | At 60 min reaction time |
| EO Power Density | 7.20 | W·L−1 | Galvanostatic input |
| O3 Power Density | 3.75 | W·L−1 | Ozonator input |
| Total Power Density | 10.95 | W·L−1 | Combined system input |
| Specific Energy Consumption (SEC) | 1.825 | kWh·m−3 | At 10 min, total abatement |
| EE/O (Electrical Energy per Order) | 10.19 | kWh·m−3·order−1 | Pseudo-first-order metric |
| Reference Cell Voltage | ≈ 24 | V | At I = 0.30 A reference test |
| HPLC Column | Kinetex C18, 5 µm, 150 × 4.6 | mm | Agilent 1260 Infinity II DAD |
Key Methodologies
Section titled “Key Methodologies”- Reactor Setup: Jacketed glass batch reactor (0.40 L) with porous-diffuser gas inlet, thermostated at 20.0 ± 0.5 °C, natural pH 6.1.
- Ozone Generation: Sander GmbH 300.1 Labor-Ozonisator fed with O2; gas stream ≈ 1-10 mg·L−1 O3 at 20 L·h−1; off-gas quenched in 2% KI trap.
- Electrochemical Cell: Two flat-plate electrodes (BDD anode + AISI 304 SS cathode), 5 cm × 8 cm geometry, 25 mm gap, 40 cm2 area; driven by Tektronix PWS2326 power supply in galvanostatic mode.
- Experimental Design: Central Composite Design (CCD) with 20 runs — 6 axial, 8 factorial, 6 center points; coded factors A (current), B (electrolyte), C (ozone).
- Operating Envelope: Current 0-161 mA, Na2SO4 1-25 mM, O3 1-10 ppm; center point at 101 mA, 13 mM, 5.5 ppm.
- Sampling Protocol: 10 min for kinetic/abatement data (pseudo-first-order window); 60 min for TOC mineralization (plateau region).
- Analytics: HPLC-DAD (Agilent 1260 Infinity II) with Kinetex C18 column (5 µm, 150 × 4.6 mm), acetonitrile / 25 mM H3PO4 mobile phase at 1.0 mL·min−1.
- Model Fitting: Quadratic response-surface models (linear + 2-factor interactions + quadratic terms) estimated by OLS; adequacy validated via ANOVA F-test, R², adjusted R², and residual diagnostics.
- Energy Assessment: SEC and EE/O computed from power density × treatment time, with separate accounting for EO and O3 contributions.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”-
Applicable Materials:
- Heavy Boron-Doped PCD anode — the BDD thin-film-on-silicon or BDD-on-niobium variants produced via MPCVD replicate the high oxygen-evolution overpotential and non-adsorbed •OH generation exploited in this study.
- For research requiring single-crystal electrode baselines, Optical Grade SCD wafers can be doped to BDD-equivalent levels upon request.
- For scaled-up flow cells beyond 40 cm2, PCD plates up to 125 mm diameter with tunable boron loading (1019-1021 cm−3) provide the rugged, fouling-resistant anode surface this paper identifies as critical for sustained operation.
-
Customization Potential:
- The 5 cm × 8 cm BDD plate used here is well within 6CCVD’s laser-cutting and custom-dimension service window — substrates can be diced to any rectangular or circular geometry with edge quality suitable for gasket sealing.
- The AISI 304 cathode can be supplied as Ti, W, or Cu metalized PCD backing plates for bipolar or membrane-electrode-assembly configurations.
- For hybrid EO-O3 reactor integration, 6CCVD offers internal metalization (Ti/Pt/Au or Ti/W) on the BDD backside for low-resistance current collection and direct busbar soldering.
-
Engineering Support:
- 6CCVD’s in-house PhD team can assist with material selection for electrochemical advanced oxidation (EAOP) reactor development, including guidance on boron-doping concentration, sp2/sp3 ratio optimization, and surface Ra (< 5 nm achievable on inch-size PCD) for reproducible •OH surface kinetics.
- For researchers extending this work to higher current densities or pulsed-current protocols, our team can advise on thermal management of the diamond anode — diamond’s exceptional thermal conductivity (≈ 2000 W·m−1·K−1) mitigates the curvature-limited plateaus observed in the A2 term.
- We can also support custom free-standing SCD or PCD windows for in-situ Raman/FTIR monitoring of •OH and O3 speciation during EO-O3 operation.
-
Call to Action:
- For custom specifications, boron-doping consultation, or metalization design for EAOP research, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
This study evaluates the abatement of four common azole fungicides—prochloraz, tebuconazole, tetraconazole, and penconazole—using ozonation (O3), electro-oxidation (EO on boron-doped diamond anode), and their coupling (EO-O3). A central composite design (CCD) with three coded factors—current (A), electrolyte (B), and ozone concentration in the gas phase (C)—was employed to model three responses: pollutant abatement (%), apparent pseudo-first-order rate constant k (min−1), and TOC removal (%). Quadratic models showed good in-samples (R2 ≈ 0.84-0.86). Ozone and current dominate abatement and kinetics (with curvature in current), while the electrolyte penalizes mineralization and narrows the window for TOC removal. Under optimal conditions, 116 mA (current), 0.992 mM (electrolyte), and 7.09 ppm (ozone concentration), the EO-O3 configuration results in a TOC removal of 33.78%. At a reaction time of 10 min (total abatement of the pollutants), the hybrid EO-O3 configuration exhibits a specific energy consumption (SEC) of 1.825 kWh·m−3. We compare trends with the last decade of literature on ozone-based EAOPs, electro-peroxone variants, and BDD anodic oxidation, and outline practical guidance for its application and scale-up, and model refinement in predictive settings.
Tech Support
Section titled “Tech Support”Original Source
Section titled “Original Source”References
Section titled “References”- 2021 - Azole and strobilurin fungicides in source, treated, and tap water from wuhan, Central China: Assessment of human exposure potential [Crossref]
- 2023 - Comparative insight of pesticide transformations between river and wetland systems [Crossref]
- 2022 - Effect of electrolyte composition on electrochemical oxidation: Active sulfate formation, benzotriazole degradation, and chlorinated by-products distribution [Crossref]
- 1983 - Rate constants of reactions of ozone with organic and inorganic compounds in water—I: Non-dissociating organic compounds [Crossref]
- 2024 - The Role of Ozonation as an Advanced Oxidation Process for Attenuation of 1, 4-Dioxane in Potable Reuse Applications [Crossref]
- 2022 - Ozonation for remediation of pesticide-contaminated soils at field scale [Crossref]
- 2025 - Micro and nanobubbles enhanced ozonation technology: A synergistic approach for pesticides removal [Crossref]
- 2025 - Research Progress of Micro-Nano Bubbles in Environmental Remediation: Mechanisms, preparation methods, and applications [Crossref]