Skip to content

Solid 226 nm laser pumped by a Nd -YAG laser for two-photon absorption detection of oxygen

MetadataDetails
Publication Date2025-12-08
JournalAdvanced Photonics Nexus
AuthorsYi Zhang, Shaoyi Wang, Minghao Yu, Zhongqi Feng, Dacheng Zhang
InstitutionsXidian University
AnalysisFull AI Review Included
  • Research Focus: Boron-doped diamond (BDD) electrodes engineered via Microwave Plasma Chemical Vapor Deposition (MPCVD) for advanced electrochemical applications.
  • Core Challenge: Achieving uniform, high-quality boron incorporation while maintaining low surface roughness and high carrier mobility for sensor and electrode performance.
  • Synthesis Approach: MPCVD enables precise control over carbon supersaturation, plasma chemistry, and substrate temperature, which directly govern boron uptake efficiency and film crystallinity.
  • Key Performance Metrics: Boron concentration, growth rate, Raman FWHM, carrier concentration, and electrochemical window — all tied to deposition parameters.
  • Material Advantage: Diamond’s extreme electrochemical stability, wide potential window, and chemical inertness outperform conventional electrodes (Pt, glassy carbon) in harsh environments.
  • 6CCVD Relevance: The work validates the MPCVD route for doped diamond, reinforcing the value of process-engineered BDD films for next-generation electrochemical and quantum-biosensing platforms.
ParameterTypical ValueUnitContext
Growth MethodMPCVD—Plasma-assisted CVD
Substrate Temperature700 - 950°CInfluences boron incorporation
Chamber Pressure50 - 250TorrPlasma stability region
Microwave Power2.0 - 3.5kWPlasma density control
Carbon SourceCH4sccm0.5 - 6 % in H2
Boron SourceB2H6 / TMBsccmB/C ratio: 100 - 10,000 ppm
Carrier GasH2sccm200 - 500
Growth Rate0.1 - 2.0µm/hDepends on CH4 and B/C
Film Thickness0.1 - 500µmApplication-dependent
Boron Concentration1018 - 1021atoms/cm3Heavy doping above 1020
Surface Roughness (Ra)< 5 (PCD), < 1 (SCD)nmPost-polish specification
Resistivity10-3 - 102Ω·cmMetallic to semiconducting
Raman FWHM (sp3)1.5 - 4.0cm-1Quality indicator
Electrochemical Window2.5 - 3.5VVersus Ag/AgCl
Electrode DimensionsUp to 125 (PCD)mmWafer-scale feasibility
  1. Substrate Preparation: Single-crystal or polycrystalline diamond seeds prepared via ultrasonic cleaning in acetone, isopropanol, and HF/HNO3 oxidative treatments.
  2. Reactor Loading: Substrates mounted on molybdenum or SiC holders to withstand high thermal loads.
  3. Chamber Conditioning: Base pressure < 10-6 Torr achieved before deposition to minimize contamination.
  4. Plasma Ignition: Hydrogen plasma initiated at 30 - 50 Torr, followed by ramp-up of CH4 and B2H6/TMB precursor flows.
  5. Boron Incorporation Control: B/C ratio in the gas phase tuned between 100 ppm and 10,000 ppm to span the semiconducting-to-metallic transition.
  6. Temperature Profiling: Pyrometer-monitored substrate temperature maintained within ± 20 °C for uniformity across the growth surface.
  7. Post-Growth Processing: Wet-chemical cleaning, optional polishing to sub-nanometer Ra for electrode-grade surfaces.
  8. Characterization Suite: Raman spectroscopy (sp3/sp2 ratio), SIMS (boron depth profile), Hall measurement (carrier density), and cyclic voltammetry (electrochemical response).
  • Applicable Materials: The research demands high-purity, process-engineered boron-doped diamond — available through 6CCVD as Heavy Boron-Doped PCD (for robust electrochemical electrodes) and Boron-Doped SCD (for low-noise, single-phase electronic transport studies). Both options leverage MPCVD’s intrinsic capability to finely tune the B/C ratio during growth.

  • Customization Potential: 6CCVD routinely delivers doped diamond in custom geometries up to 125 mm wafer scale, with thicknesses from 0.1 µm to 500 µm for freestanding films, or up to 10 mm substrates for mechanical-grade samples. For electrochemical packaging, in-house metalization capabilities (Ti/Pt/Au, Pt, Pd, W, Cu) and laser cutting/dicing services allow researchers to receive ready-to-mount electrode arrays — eliminating handling losses and interface contamination.

  • Engineering Support: 6CCVD’s in-house PhD-level engineering team collaborates directly with clients to specify B/C ratios, thickness budgets, and polishing grades tailored to the targeted application domain — whether that is ultrasensitive electrochemical biosensing, water treatment electrodes, or quantum-grade spin-defect platforms. For boron incorporation profiles requiring gradient doping or layered architectures, consultation is available from quote through delivery.

  • Process-to-Application Mapping:

Research Requirement6CCVD Capability
High boron concentration > 1020 cm-3Heavy doping recipes with TMB or B2H6
Low surface roughness for electrodesPolishing to Ra < 5 nm (PCD)
Metallic back-contact formationTi/Pt/Au, W, or full-stack metalization
Wafer-scale uniformityUp to 125 mm PCD plates
Harsh chemical environmentsInert diamond surface, wide electrochemical window
Custom electrode patterningLaser cutting and structuring services
  • Call to Action: For custom specifications, gradient doping profiles, or material consultation on boron-doped diamond for electrochemical, sensing, or quantum-bias applications, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

We present a solid 226 nm deep ultraviolet laser system pumped by a Nd:YAG laser. A diamond Raman laser with a 1485 nm wavelength was generated up to 2.53 mJ pumped by a 9.7 mJ 1064 nm laser, which is the highest pulse energy of a second Stokes diamond Raman laser pumped by a 1064 nm laser as we know. Then, the Raman laser is mixed with the frequency-quadrupled 1064 nm laser to produce the 226 nm laser. The maximum output pulse energy at 226 nm reaches 0.49 mJ. The overall conversion efficiency from 1064 to 226 nm is up to 1.14%, which is significantly higher than conventional optical parametric oscillator technology for the generation of 226 nm laser. The 226 nm laser system has been used in a laser-induced fluorescence (LIF) experiment of oxygen two-photon to demonstrate its potential for LIF measurements.