Thermal effects and energy balance in electron tunneling through nano-diodes
Paper details
Section titled “Paper details”| Field | Value |
|---|---|
| Journal | Journal of Physics D Applied Physics |
| Published | 2026-03-24 |
| Authors | Michael V Davidovich, Igor S Nefedov, J Miguel Rubi |
| DOI | 10.1088/1361-6463/ae566b |
Resonant tunneling raises current density, but predicted electrode heating sets the limit on stable operation. The model places critical current densities for vacuum nanodiodes at order 10^12 A m^-2. In a 2 nm vacuum diode, it predicts an anode temperature of 21,254 K at 1.05 × 10^13 A m^-2 and 20 V.
A coupled quantum and thermal model
Section titled “A coupled quantum and thermal model”The study reports numerical predictions rather than measured device data. The framework joins the one-dimensional Schrödinger equation, a heat transfer equation, and Poisson’s equation. The reported voltage-ampere characteristics simplify this system by omitting space charge and using a linear temperature profile. They also neglect radiative heat transfer.
Electron and phonon transport are assumed ballistic. At room temperature, this assumption limits the modeled structure size to about 10 nm. At low temperature, larger structures and more barriers or wells become possible. A flat diode contains a cathode, a nanometer-scale gap, an anode, and thermostats held at 300 K. Electrode sections on the order of hundreds of nanometers provide a path for heat to reach the thermostats.
For the reported numerical transparency curves, the authors divide the gap into 100 subregions and use a piecewise constant potential with wave impedance transformation. Their reported numerical error is no greater than 1%.
Quantum potential and two-way current
Section titled “Quantum potential and two-way current”Multiple images define the quantum potential from electrode work functions and dielectric filling. The calculation captures electrode proximity and smooth well bottoms created by prescribed grid voltages. It does not replace the barrier with a simple rectangular profile.
The current integral combines the cathode and anode electron distributions at their separate temperatures. It includes tunneling and thermionic contributions. Reverse tunneling is retained at low anode voltage, while reverse thermionic current remains possible when the anode is hot.
Space charge from transmitted electrons raises the potential barrier through the Poisson solution. A simple estimate gives a 0.036 eV barrier increase at 1 × 10^12 A m^-2. At high current density, this correction limits the steepness of the voltage-ampere characteristic.
Energy balance and heat transport
Section titled “Energy balance and heat transport”Joule heating contributes a volumetric source proportional to electrical resistivity and J². The model also includes Nottingham heating at the cathode and Peltier heating or cooling at each electrode boundary. Net electrons gain eUa during transport to the anode and release that energy there after scattering.
Heat crosses the gap through ballistic phonons when a dielectric fills it. Near the electrodes, the treatment changes to diffusion-ballistic transport and includes Kapitza interface resistance. The authors neglect scattering within the small central region and approximate its temperature profile as linear between the electrode regions.
The temperature-dependent conductivities, mean free paths, and electrical resistance make the heat balance nonlinear. The authors solve it iteratively by minimizing heat-balance residuals for the cathode and anode temperatures. The equilibrium solution becomes unstable beyond a critical current density.
Vacuum diode temperature results
Section titled “Vacuum diode temperature results”The vacuum-diode calculation uses a 2 nm gap and copper electrodes with lengths of 500 nm. Both electrodes have a Fermi energy of 7 eV and a work function of 4.36 eV. The thermostat is at 300 K.
Table 1. Calculated copper-electrode temperatures for the 2 nm vacuum diode.
| Current density, A m^-2 | Anode voltage, V | Cathode temperature, K | Anode temperature, K |
|---|---|---|---|
| 5.36 × 10^8 | 10 | 300.0 | 367.3 |
| 1.25 × 10^10 | 12 | 300.0 | 487.5 |
| 1.08 × 10^11 | 15 | 300.1 | 2325 |
| 3.15 × 10^12 | 17 | 405.1 | 5993 |
| 1.05 × 10^13 | 20 | 1611.9 | 21 254 |
At 1.08 × 10^11 A m^-2 and 15 V, the anode reaches 2325 K while the cathode remains at 300.1 K. At 3.15 × 10^12 A m^-2 and 17 V, the anode reaches 5993 K. The largest tabulated case reaches 21,254 K at 1.05 × 10^13 A m^-2 and 20 V.
The tabulated rise starts near 10^11 A m^-2. The authors summarize the critical scale for vacuum nanodiodes as order 10^12 A m^-2. The anode heats more strongly at low current because JUa is released over the electron mean free path. Ballistic transfer partly equalizes the two electrode temperatures.
A separate estimate gives a volumetric Joule heat source of 1.75 × 10^10 J m^-3 at 1 × 10^9 A m^-2. At 1200 K, the heat flux reaches the thermostat with electrode dimensions of 200 nm. The authors recommend pulsed operation at high current density or with larger electrodes.
Resonant wells and dielectric-filled gaps
Section titled “Resonant wells and dielectric-filled gaps”The resonant-tunneling example is an AlxGa1-xAs-GaAs structure with two wells and three barriers. Each barrier is 2 nm wide and each well is 3 nm wide. The calculation uses a 0.4 eV Fermi energy, a 4.5 eV work function, an effective mass of 0.067 of the free-electron mass, and a permittivity of 12.
Resonant peaks are incomplete in this structure. Their energies first shift downward and then upward as the anode voltage rises from 0 to 2.5 V. The current reaches its maximum at 1.3 V, then enters a decreasing section before rising again. Increasing well width causes current saturation.
For a dielectric-filled gap, the model treats CVD diamond as having a permittivity of 5.6 and a barrier below 1 eV. BeO has a permittivity of 7.3. Both materials also provide high thermal conductivity in the model.
The acoustic calculation uses diamond and beryllium. Both have an average sound speed of about 12,000 m s^-1. Their densities are 3550 and 1848 kg m^-3, so their acoustic impedances differ by about a factor of 1.8. The resulting contact transfer coefficient is 0.916. In a vacuum gap, the model retains photonic heat transfer, which it treats as minimal. A filled gap carries heat through phonons.
Figure 4 compares vacuum and diamond-filled gaps at 300 K and 800 K. It includes a 1200 K filled-diode case and a 1500 K cathode case for vacuum. The authors conclude that high-conductivity diamond or BeO can reduce overheating and extend stable operation.
Limits and device selection
Section titled “Limits and device selection”The Fowler-Nordheim calculation predicts transparency falling from 1 to 0.88 at 20 V for a 0.1 nm gap. The density would then sit only 12% below its maximum. The paper warns that this approximation overestimates the density and fails for narrow barriers. The authors state that the real maximum density is at least two to three orders lower, although saturation remains.
For resonant structures, the authors place the maximum current at about one to two percent of the theoretical limit. The theoretical limit is 8 × 10^15 A m^-2 for a copper cathode with a 7 eV Fermi energy.
Material choices affect both barriers and heat removal. The authors favor a cathode with low work function and high Fermi energy. Beryllium is cited for a 1277 °C melting point and thermal conductivity of 201 W m^-1 K^-1. Platinum is suggested for an anode because its work function is about 6 eV.
Several limits remain. The reported voltage-ampere characteristics omit space charge, radiation, and diffusion in conducting or semiconducting gaps. Space charge must be included for high-current resonant structures. The results do not apply to semiconductors with significant field penetration. Their validity requires a Debye screening length no greater than 0.1 nm.
The model assumes atomically smooth surfaces, although the paper notes that nanometer-scale irregularities can trigger explosive emission near critical voltage. The calculations are steady state and do not cover transients.
For device design, the dielectric must lower the tunneling barrier while carrying heat without a large interface resistance. The electrode size, thermostat coupling, and operating duty cycle must be selected together with the current target.
Materials and support
Section titled “Materials and support”The paper’s modeled implementation uses a CVD diamond dielectric between conducting electrodes in a metal-insulator-metal or resonant tunneling diode. The diamond materials catalog lists single-crystal and polycrystalline diamond grown by MPCVD with Au, Pt, Pd, Ti, W, or Cu metallization, although its minimum listed thickness of 0.1 micrometers exceeds the several-nanometer gaps modeled here. For questions on adapting the electrode and dielectric geometry, 6CCVD provides engineering support for custom fabrication support.
View Original Abstract
Abstract The performance of nanoscale and microscale diodes depends largely on the interplay between quantum tunneling and thermal effects. While resonant tunneling can greatly enhance current densities, the accompanying electrode heating threatens device stability and may trigger thermal runaway at high currents. This makes the joint treatment of tunneling and heat transport essential for reliable device design. To address this challenge, we derive a general quantum potential within the Schrödinger equation, and develop analytical formulations for diode current at different electrode temperatures. The approach yields exact current-voltage characteristics, explicitly accounts for reverse tunneling at low anode voltages, and incorporates electrode materials with distinct Fermi energies and work functions. Coupling these results with a ballistic heat transport model, we predict electrode heating under realistic operating conditions. Our analysis shows that resonant tunneling increases current but also intensifies heating. Materials with high thermal conductivity, such as diamond or BeO, have been shown to mitigate overheating and extend stable operation. These findings provide a predictive framework for understanding the coupled quantum-thermal behavior of tunneling diodes and offer guidelines for designing advanced electron sources and nanoscale power devices where current amplification must be balanced with thermal stability.
Single Crystal Cvd Diamond Plate
View Specs →
Free Standing Polycrystalline Cvd Diamond Membrane
View Specs →
Customized Single Crystal Cvd Diamond Plate
View Specs →Original source
Section titled “Original source”References
Section titled “References”- 2002 - Transient simulations of a resonant tunneling diode [Crossref]
- 1999 - Theory of coherent generation in resonant-tunneling diodes [Crossref]
- 2003 - Stark ladder laser with a coherent electron subsystem [Crossref]
- 2023 - Field emission in vacuum resonant tunneling heterostructures with high current densities [Crossref]
- 2025 - Nanoscale nonlocal thermal transport and thermal field emission in high-current resonant tunnel structures [Crossref]
- 1999 - Breakdown and high-energy electron vacuum emission of MIS-structures [Crossref]
- 1984 - Physics of resonant tunneling. the one-dimensional double-barrier case [Crossref]
- 1996 - Improved airy function formalism for the study of resonant tunneling in multibarrier semiconductor heterostructures [Crossref]