Skip to content

Electron spin control of optically levitated nanodiamonds in vacuum

MetadataDetails
Publication Date2015-10-22
JournalRePEc: Research Papers in Economics
AuthorsThai M. Hoang, Jonghoon Ahn, Jaehoon Bang, Tongcang Li
InstitutionsPurdue University West Lafayette
AnalysisFull AI Review Included

Electron Spin Control of Optically Levitated Nanodiamonds in Vacuum: Technical Documentation

Section titled “Electron Spin Control of Optically Levitated Nanodiamonds in Vacuum: Technical Documentation”
  • Core Achievement: Demonstrates the first electron spin resonance (ESR) control of nitrogen-vacancy (NV) centers in an optically levitated nanodiamond under low vacuum conditions, establishing a hybrid spin-optomechanical platform.
  • Material Used: Commercial 100 nm nanodiamonds (Adamas ND-NV-100nm-COOH) containing native NV centers, launched via ultrasonic nebulizer (30 µg/ml in water).
  • Optical Trapping Setup: A 1550 nm trapping laser focused by a NA=0.85 objective lens is shown to be more benign to NV photoluminescence than the conventional 1064 nm trap.
  • Key Discovery: ESR contrast unexpectedly enhances as pressure decreases (down to ~9 Torr), attributed to the reduction of low-quality surface NV⁻ centers and moderate laser-induced heating.
  • Temperature Quantification: Internal temperature of the levitated nanodiamond rises linearly from 300 K (atmospheric) to 380 K and above (low vacuum), characterized by zero-field splitting parameter D.
  • Gas Sensing Capability: Reversible differential response of NV photoluminescence and ESR contrast between O₂ and He environments demonstrates potential for room-temperature oxygen gas sensing.
  • Critical Limitation Identified: Optical absorption in commercial nanodiamonds prevents stable trapping at high vacuum; samples with negligible absorption at 1550 nm are required for future macroscopic quantum experiments.
ParameterValueUnitContext / Condition
Nanodiamond Diameter94 ± 7nmHydrodynamic measurement (spec: 100 nm)
Trapping Laser Wavelength1550nmMore benign to NV PL than 1064 nm
Excitation Laser Wavelength532nmNV zero-phonon line excitation
Trap Objective NA0.85—Infrared objective for optical levitation
Trapping Frequency (Ω₀/2π)~100kHzCenter-of-mass harmonic motion
Viscous Damping (Γ₀/2π)500 (P_atm) → 40 (31 Torr)kHzPressure-dependent air drag
Excitation Laser Power30µWFor spectral acquisition
Peak Laser Intensity (Trap + Excitation)~200µW/µm²Held constant during gas tests
Ambient Magnetic Field600mGEarth field, near zero-field ESR regime
Zero-Field Splitting (D₀)2.8697GHzBase value at 0 K reference
Thermal Shift Coefficient (a₁)9.7 × 10⁻⁵GHz/KLinear term of D(T)
NV Spin Resonance Separation (2E)~10MHzStrain-induced splitting
Measured Internal Temperature300 → 380+KAtmospheric to low vacuum
Critical Loss Pressure9TorrLower limit for stable trapping
Loss Temperature (450 K example)450KInternal temp before particle escape
MW Antenna Distance0.5mmFrom nanodiamond to microwave antenna
MW Pulse Sequence500msAlternating on/off ESR control
Imaging Integration Time5.3sPer fluorescence measurement
Air Viscosity (η) at 296 K18.52 × 10⁻⁶Pa·sSutherland formula
Mean Free Path (s) at 296 K67nmAir molecules
O₂ Sensitivity (un-optimized)~100photons · Torr⁻¹ · s⁻¹Linear range count difference
Zero-Field Splitting Pressure Shift1.5kHz/barEquivalent to ~20 mK temperature error
Particle Stability Duration>200hoursAtmospheric / low vacuum
  1. Sample Preparation: Commercial carboxylated nanodiamonds (Adamas ND-NV-100nm-COOH) mixed with deionized water at ~30 µg/ml density.
  2. Aerosol Injection: Suspension nebulized via a Mabis ultrasonic nebulizer into the vacuum chamber.
  3. Optical Trapping: Single nanodiamond captured at the focus of a 1550 nm laser beam using a NA=0.85 infrared objective.
  4. NV Excitation & Detection: A 532 nm green laser (beam-splitter / 950 nm long-pass dichroic) excites NV centers; fluorescence is analyzed by an Andor spectrometer and Newton EMCCD camera.
  5. Microwave Spin Control: Electron spin transitions |ms=0⟩ ↔ |ms=±1⟩ driven by a microwave antenna (0.5 mm distance) using a lock-in detection scheme (500 ms on/off pulses).
  6. Pressure Regulation: Absolute piezo sensor monitors pressures above 10 Torr; micropirani sensor covers lower pressures. Pressure swept from 759 Torr down to ~9 Torr.
  7. Temperature Calibration: Internal temperature derived from ESR zero-field splitting D(T); strain offset (∆strain) individually calibrated by extrapolating temperature vs. laser power to zero power (T = 296 K).
  8. Particle Size Determination: Hydrodynamic diameter extracted by fitting the power spectral density (PSD) of center-of-mass motion to the Berg-Sørensen-Flyvbjerg model and applying Cunningham slip correction.
  9. Gas Environment Switching: Chamber back-filled alternately with O₂ (≥99%) and He (≥99%) to characterize differential fluorescence and ESR responses.

The commercial 100 nm nanodiamonds used in this study exhibit significant optical absorption at 1550 nm, limiting stable levitation to ~9 Torr. For groups seeking to push this platform toward high vacuum and macroscopic quantum superposition experiments, the following 6CCVD offerings are highly relevant:

  • Optical-Grade Single Crystal Diamond (SCD): Bulk SCD plates or membranes down to <100 nm thickness offer negligible bulk absorption at 1550 nm and high NV ensemble quality for advanced levitated optomechanics.
  • NV-Engineered SCD Wafers: Custom SCD substrates (up to 10 mm thick) can be specified with optimized N-doping density and controlled NV conversion (e.g., via post-growth annealing) to deliver uniform, high-brightness NV ensembles.
  • High-Purity Polycrystalline Diamond (PCD): For researchers requiring larger area or flexible geometry, 6CCVD’s optical-grade PCD (polished to Ra < 5 nm on inch-size wafers) is a strong alternative to commercial nanodiamond suspensions.
  • Boron-Doped Diamond (BDD): If future device iterations require conductive diamond for in-situ Stark tuning or charge-state stabilization of NV centers, 6CCVD’s heavy/light boron doping capabilities provide tunability.

This experiment relies on a tightly controlled nanoparticle geometry (100 nm hydrodynamic diameter) and integrated optical/microwave interfaces. 6CCVD supports analogous custom workflows:

  • Custom Substrate Dimensions: SCD/PCD plates and wafers up to 125 mm (PCD) with thicknesses spanning 0.1 µm to 500 µm (thin film) up to 10 mm (bulk substrates).
  • Surface Termination Control: Surface chemistry is critical for NV⁻ charge-state stability (the paper explicitly links ESR enhancement to oxygen surface termination). 6CCVD can provide specified terminations (O-, H-, carboxyl-functionalized) and acid-cleaned surfaces.
  • Custom Metalization: Microwave antennas, electrodes, and integrated coplanar waveguides can be realized using 6CCVD’s in-house metalization stack options: Au, Pt, Pd, Ti, W, Cu (single or multilayer, e.g., Ti/Pt/Au).
  • Laser Cutting & Shaping: Micron-scale diamond membranes, cantilevers, or pillar structures required for next-generation hybrid optomechanics can be produced via 6CCVD’s precision laser-cutting services.
  • Ultra-Smooth Polishing: SCD surfaces at Ra < 1 nm reduce scattering losses for optical trapping and NV readout sensitivity.

Translating this proof-of-concept into a deployable room-temperature oxygen gas sensor or quantum sensor requires careful material selection balancing NV density, optical absorption, and surface chemistry. 6CCVD’s in-house PhD team can assist with:

  • Selecting the optimal diamond form (SCD vs. PCD vs. nanodiamond composite) for your sensing or trapping geometry.
  • Specifying NV concentration through N-doping level and electron irradiation/annealing recipes.
  • Designing metalization layouts compatible with microwave ESR antennas and/or integrated photonic readouts.
  • Advising on surface functionalization strategies to maximize NV⁻ yield and long-term signal stability.

For custom specifications, material consultation, or to discuss how 6CCVD’s diamond materials can accelerate your levitated optomechanics, NV magnetometry, or gas-sensing research, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Electron spins of diamond nitrogen-vacancy (NV) centers are important quantum resources for nanoscale sensing and quantum information. Combining NV spins with levitated optomechanical resonators will provide a hybrid quantum system for novel applications. Here we optically levitate a nanodiamond and demonstrate electron spin control of its built-in NV centers in low vacuum. We observe that the strength of electron spin resonance (ESR) is enhanced when the air pressure is reduced. To better understand this system, we investigate the effects of trap power and measure the absolute internal temperature of levitated nanodiamonds with ESR after calibration of the strain effect. We also observe that oxygen and helium gases have different effects on both the photoluminescence and the ESR contrast of nanodiamond NV centers, indicating potential applications of NV centers in oxygen gas sensing. Our results pave the way towards a levitated spin-optomechanical system for studying macroscopic quantum mechanics.