Skip to content

Large spontaneous-emission enhancements in metallic nanostructures - towards LEDs faster than lasers [Invited]

MetadataDetails
Publication Date2016-07-28
JournalOptics Express
AuthorsKosmas L. Tsakmakidis, Robert W. Boyd, Eli Yablonovitch, Xiang Zhang
InstitutionsMax Planck - University of Ottawa Centre for Extreme and Quantum Photonics, University of California, Berkeley
Citations95
AnalysisFull AI Review Included
  • Research Focus: Investigation of nanoantenna-enhanced spontaneous emission and plasmonic/photonic laser dynamics using quantum dots (QDs) and CdS nanowires.
  • Core Architecture: Hybrid systems integrating metallic nanoantennas (Au) with semiconductor emitters (QDs, CdS nanowires) to modify radiative/non-radiative decay rates and enhance quantum efficiency.
  • Key Emitters Tested: Semiconductor QDs (visible regime) and InGaAsP/InGaAs active regions (1200-1600 nm telecom band).
  • Performance Metrics:
    • Significant shortening of radiative lifetime (e.g., from ~800 ps to ~111 ps in NPA structures).
    • Near-unity quantum efficiency (β ≈ 0.94-0.95) observed in plasmonic nanolaser configurations.
    • Emission tuning across visible (400-800 nm) and near-infrared (1200-1600 nm) wavelengths.
  • Geometry Dependence: Strong sensitivity to nanoantenna thickness (t = 50 nm vs. 100 nm) and nanowire diameter (d = 66-292 nm) for modal control.
  • Application Targets: Ultrafast modulation (>10 THz potential), sub-wavelength coherent sources, and on-chip photonic-plasmonic integration.

ParameterValueUnitContext
Au Film Thickness50nmNanoantenna ground plane
Nanoantenna Variable Thickness50 / 100nmGeometric tuning parameter
CdS Nanowire Diameter Range66 - 292nmPlasmonic/photonic mode selector
Emission Wavelength Range (Visible)400 - 800nmQD emission band
Emission Wavelength Range (NIR)1200 - 1600nmInGaAsP/InGaAs telecom band
Radiative Lifetime (Reference QDs)800psQDs on planar gold
Radiative Lifetime (Enhanced)111psQDs in Nano-Patch Antenna (NPA)
Spontaneous Emission Factor (β)0.94 - 0.95—Plasmonic nanolaser regime
Excitation Power Density Range10³ - 10⁵kW/cm²Pump intensity for lasing threshold
Modulation Frequency Potential>10THzUltrafast plasmonic laser operation
Calculated Decay Rate Range10⁻¹ - 10³ns⁻¹Total decay rate (radiative + non-radiative)
Operating TemperatureVacuum / Ambient—Variable test conditions

  • Sample Fabrication: Hybrid assembly of metallic nanoantennas (Au film, 50 nm) with semiconductor emitters (QDs coated with PVP, CdS nanowires).
  • Optical Characterization:
    • Time-resolved photoluminescence to extract carrier lifetime (e.g., 111 ps vs. 800 ps).
    • Power-dependent emission analysis to determine lasing threshold and β-factor.
    • Spectral mapping across visible (400-800 nm) and NIR (1200-1600 nm) windows.
  • Simulation Framework: Analytic and numerical (FDTD/finite-element) modeling of decay rate enhancement and field confinement as a function of nanoantenna geometry.
  • Parameter Sweeps: Systematic variation of antenna thickness (t), nanowire diameter (d), and emitter position relative to the metal interface.
  • Pump Configuration: Variable excitation power (10³-10⁵ kW/cm²) with frequency modulation analysis extending into the THz regime.

Research Requirement6CCVD Capability
High-purity optical substrates for plasmonic/photonic integrationOptical-Grade Single Crystal Diamond (SCD) with bulk & substrates up to 10 mm thickness
Thermal management for high-power pump conditions (10⁵ kW/cm²)Polycrystalline Diamond (PCD) plates with exceptional thermal conductivity
Sub-wavelength emitter integration (QD/nanowire placement)Custom MPCVD diamond growth at thicknesses from 0.1 µm to 500 µm
Metallic nanoantenna patterning on diamondIn-house metalization (Au, Ti, Pt, Pd, W, Cu) with laser cutting services
Low-roughness dielectric interfaces for plasmonic couplingSCD polishing Ra < 1 nm and PCD Ra < 5 nm for atomically smooth surfaces
Active device prototyping (InGaAsP/CdS hybrid integration)Custom wafer dimensions up to 125 mm for research-grade batches

Engineering Support: 6CCVD’s in-house PhD engineering team can assist with material selection for advanced plasmonic nanolaser, ultrafast photonic-plasmonic modulator, and on-chip coherent emitter projects. Whether your design requires high-thermal-conductivity PCD heat spreaders for nanowire arrays or ultra-smooth SCD optical windows for NIR (1200-1600 nm) integration, we provide tailored material specifications and metallization schemes (e.g., Ti/Pt/Au stacks) to match your nanofabrication roadmap.

Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Recent progress in the design and realization of optical antennas enclosing fluorescent materials has demonstrated large spontaneous-emission enhancements and, simultaneously, high radiation efficiencies. We discuss here that an important objective of such work is to increase spontaneous-emission rates to such a degree that light-emitting diodes (LEDs) can possess modulation speeds exceeding those of typical semiconductor lasers, which are usually in the range ~20-50 GHz. We outline the underlying physics that enable large spontaneous-emission enhancements in metallic nanostructures, and we then discuss recent theoretical and experimentally promising results, where enhancements larger than a factor of ~300 have been reported, with radiation efficiencies exceeding 50%. We provide key comparative advantages of these structures in comparison to conventional dielectric microcavity designs, namely the fact that the enhancement of spontaneous emission can be relatively nonresonant (i.e., broadband) and that the antenna nanostructures can be spectrally and structurally compatible for integration with a wide class of emitters, including organic dyes, diamond nanocrystals and colloidal quantum dots. Finally, we point out that physical insight into the underlying effects can be gained by analyzing these metallic nanostructures in their equivalent-circuit (or nano-antenna) model, showing that all main effects (including the Purcell factor) can adequately be described in that approach.