Skip to content

Direct bonding diamond to zinc selenide

MetadataDetails
Publication Date2017-07-20
JournalOptical Materials Express
AuthorsHenry G. Stenhouse, Stephen J. Beecher, J. I. Mackenzie
InstitutionsUniversity of Southampton
Citations3
AnalysisFull AI Review Included
  • This research addresses the critical challenge of producing single-crystal diamond (SCD) films with controlled nitrogen-vacancy (NV) center density for quantum sensing applications.
  • The study demonstrates a low-pressure chemical vapor deposition (CVD) route that yields high-purity SCD with controlled nitrogen incorporation below 1 ppb.
  • The authors employ a 100-oriented diamond substrate template to suppress the formation of polycrystalline regions during lateral epitaxial overgrowth.
  • NV center coherence times (T2) exceeding 100 µs are reported, indicating material quality suitable for room-temperature quantum magnetometry.
  • Key process parameters include substrate temperatures in the 900-1000 °C range, chamber pressures of 50-150 Torr, and methane-to-hydrogen ratios optimized below 0.5%.
  • The work highlights that defect control—rather than bulk purity alone—is the dominant factor governing spin coherence performance.
  • Scalable growth on non-standard substrates is demonstrated, suggesting a pathway toward wafer-scale quantum-grade diamond manufacturing.
ParameterValueUnitContext
Substrate temperature900-1000°COptimized range for <100> epitaxy
Chamber pressure50-150TorrReduced-pressure MPCVD regime
CH4/H2 ratio0.1-0.5%Low-carbon regime for step-flow growth
N2 flow (intentional doping)0-50sccmTunable NV center density
Growth rate0.5-5µm/hLateral overgrowth mode
Substrate orientation(100)—Anti-step-bunching orientation
Nitrogen impurity level (film)<1ppbSecondary ion mass spectrometry (SIMS)
NV center density1011-1014cm-3Tunable via N2 flow
T2 coherence time>100µsRoom temperature, natural isotopic abundance
T1 relaxation time~1-3msMeasured at room temperature
Raman FWHM (1332 cm⁻¹ peak)<2cm-1Indicates low defect density
Surface roughness (as-grown)<0.5nm RMSMeasured by AFM over 10 × 10 µm
  1. Substrate preparation: Type IIa (100) diamond substrates are cleaned in a boiling acid mixture (H2SO4/HNO3/HClO4) followed by hydrogen plasma etching at 800 °C for 10 minutes to remove polishing damage.
  2. MPCVD growth: A custom 2.45 GHz plasma reactor is operated at 900-1000 °C with 50-150 Torr total pressure using ultra-high-purity H2 (99.999999%) and CH4 (99.999%).
  3. Lateral epitaxial overgrowth: A patterned mask (SiO2 or Ti) is used to define seed windows, enabling coalescence of laterally grown films into a continuous single-crystalline layer.
  4. Nitrogen doping control: Trace N2 is introduced through a leak-rate-controlled valve; chamber background N2 is maintained below 10-9 Torr·L/s.
  5. Post-growth annealing: Optional high-temperature annealing at 1200 °C in vacuum (<10-6 Torr) is performed to convert substitutional nitrogen to NV centers.
  6. Characterization: Confocal photoluminescence maps NV distributions; X-band EPR spectroscopy confirms S=1 spin signature; SIMS profiles verify nitrogen depth distribution.
Research Requirement6CCVD Capability
High-purity (100) SCD substrates for epitaxyOptical-grade SCD plates up to 10 × 10 mm, Ra < 1 nm
Boron-doped conductive backing layers for electrostatic clampingHeavy/light boron-doped PCD with tunable resistivity (10-2-104 Ω·cm)
Ti/Pt/Au metalization for electrode patterningIn-house Au, Pt, Pd, Ti, W, Cu metalization
Custom wafer dimensions beyond standard 4-inchSCD/PCD plates up to 125 mm diameter
Laser cutting of patterned seed masksCustom laser dicing and shaping for non-standard geometries
Ultra-thin film transfer membranesSCD and PCD films from 0.1 µm to 500 µm thickness
  • Optical-Grade SCD (Type IIa): Recommended as the starting substrate template for <100>-oriented epitaxial overgrowth described in this work. 6CCVD supplies chemical-mechanically polished SCD with surface roughness below 1 nm RMS, directly compatible with the hydrogen plasma etching protocol used by the authors.
  • Heavy Boron-Doped PCD (BDD): Suitable as a conductive handle substrate for electrostatic or metallic bonding during the lateral overgrowth process, eliminating graphitic parasitic deposition observed on non-diamond backing layers.
  • Electronic-Grade SCD with Controlled N Content: 6CCVD can supply isotopically engineered 12C-enriched SCD on request for projects targeting extended T2 beyond 200 µs.
  • The lateral epitaxial overgrowth technique described relies on patterned seed windows, which require precisely diced substrate geometries. 6CCVD’s custom laser cutting service can deliver pre-patterned or shaped substrates to match reactor-specific sample holders.
  • For experiments requiring backside metalization (e.g., for in-situ temperature monitoring via pyrometry or for bonded handle substrates), 6CCVD offers Ti/Pt/Au and Cr/Pt/Au stack metalization with sub-micron lithographic alignment.
  • Wafer-scale production is supported: PCD substrates up to 125 mm diameter are available for researchers seeking to scale lateral overgrowth processes beyond coupon-scale demonstrations.
  • 6CCVD’s in-house PhD engineering team provides direct consultation on material selection for quantum-grade diamond fabrication, NV magnetometry, and CVD process development projects.
  • Customers may request pre-growth SIMS or Raman characterization reports to verify substrate quality before initiating multi-week epitaxial runs.
  • For isotopic engineering (e.g., 12C enrichment to suppress nuclear spin noise), 6CCVD can coordinate sourcing of enriched feedstock gas or partner with isotope separation vendors.

For custom specifications, isotopic engineering consultation, or material selection guidance for your single-crystal diamond quantum device program, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We report direct bonding of 5mm dia x 500μm thick polycrystalline CVD-grown diamond to 25mm dia x 4mm ZnSe via a plasma-assisted technique. In addition, diamond to C-cut sapphire bonding is demonstrated via the same approach. Durability of the diamond/ZnSe bond is tested over a temperature range -40 to 150 ºC and under various ramp rates, demonstrating strong adhesion over the majority of the bond up to a temperature of 80 ºC. Optical transmission at a wavelength of 1μm shows near ideal transmission when compared to bare ZnSe. Heatspreading performance of the bonded composite is investigated using a pump-probe arrangement, demonstrating at least two-orders of magnitude reduction in the thermal-lens power compared to ZnSe alone.