Skip to content

A nanodiamond-fluorescein conjugate for cell studies

MetadataDetails
Publication Date2018-03-29
JournalAdvances in Natural Sciences Nanoscience and Nanotechnology
AuthorsSeidy Pedroso‐Santana, Noralvis Fleitas‐Salazar, Jose A. Sarabia-Sainz, Erika Silva‐Campa, Alexel Burgara-Estrella
InstitutionsUniversidad de Sonora
Citations7
AnalysisFull AI Review Included
  • Objective: Synthesis and characterization of fluorescent nanodiamond conjugates (Nanodiamond-Fluorescein) for real-time bioimaging and intracellular tracking in HeLa cells.
  • Two Material Classes Evaluated: Detonation Nanodiamonds (DND) (~150 nm post-deagglomeration) and Nitrogen-Vacancy Center Nanodiamonds (NV-ND) (~40 nm, 1-4 NV centers/particle).
  • Surface Chemistry: Mixed carboxylation (H2SO4:HNO3 at 75 °C, 24 h) and hydroxylation (Fenton/H2O2 chemistry) protocols to generate active anchor sites.
  • Coupling Strategy: APTES silanization for amine linkage on DND; EDC/NHS activation for cysteine-thiol linkage on NV-ND; both terminated with FITC conjugation.
  • Key Result - Fluorescence Enhancement: NV-ND-FITC conjugates exhibit enhanced FITC emission attributed to electron transfer between NV center and FITC chromophore — a novel mechanism for boosting organic dye quantum yield on diamond substrates.
  • Biological Validation: Confocal microscopy (488 nm excitation) confirmed extracellular vesicular clustering at 3 h and intracellular localization at 24 h in HeLa cells with no measurable cytotoxicity (MTT assay).
  • Strategic Value: Establishes diamond as a dual-function theranostic platform — intrinsic NV fluorescence + organic dye payload — with implications for drug delivery tracking and biomarker discovery.
ParameterValueUnitContext
DND starting materialPlasmachem Nanopure-G01, 4 wt%wt%Detonation nanodiamond stock
DND size (post-deagglomeration)100-150nmBead-assisted sonic disintegration
NV-ND size (Adamas)40nmCarboxylated fluorescent grade
NV centers per particle1-4countLow-density NV population
Carboxylation acid ratioH2SO4:HNO3 = 3:1vol:volMixed acid oxidation
Carboxylation temperature75°CStirred for 24 h
Hydroxylation reagentFeSO4 (4 g) + H2O2 (20 ml)—Fenton-type chemistry
Hydroxylation temperature30°C90 min with sonication
APTES volume20µlIn 30 ml ethanol + 30 µl NH4OH (29.4 wt%)
APTES reaction time24hRoom temperature, dark
EDC concentration1 mg / 100 µl—In DI water
NHS concentration1 mg / 100 µl—In DI water
EDC/NHS activation1 h + 1 hhSequential at RT
Cysteine mass4mgIn 500 µl PBS (10 mM, pH 7.4)
FITC loading1mgPer conjugation batch
FITC reaction time4hRT, dark, periodic agitation
Excitation wavelength480nmFluorescence spectroscopy
FITC emission peak520-530nmStandard fluorescein signature
NV0 emission575nmNeutral NV center photoluminescence
NV− emission (expected)638nmNot detected in this batch
DAPI staining concentration0.3µMNuclear counterstain
Cell lineHeLa (ATCC CCL-2)—Cervical cancer model
Incubation temperature37°C5% CO2 atmosphere
Initial incubation window3hExtracellular observation point
Long-term incubation window24hIntracellular penetration confirmed
Working conjugate dilution0.004wt%In DMEM for cell exposure
Spectroscopic dilution1wt%In PBS for fluorescence measurement
  1. Detonation Nanodiamond (DND) Deagglomeration

    • Bead-assisted sonic disintegration with silica beads in suspension.
    • Initial agglomerate size ~1000 nm → reduced to ~150 nm (DLS + TEM confirmation).
  2. Carboxylation of DND

    • 200 mg DND + 15 ml H2SO4:HNO3 (3:1).
    • Heat at 75 °C for 24 h, followed by NaOH (0.1 M, 90 °C, 2 h) and HCl (0.1 M, 90 °C, 2 h) washes.
    • 4× wash cycles with DI water; vacuum-dried.
  3. Hydroxylation of Carboxylated DND

    • 30 mg cND in 30 ml H2O + 4 g FeSO4 + 20 ml H2SO4.
    • 15 min stirring → 20 ml H2O2 addition on ice (30 min).
    • Raised to 30 °C for 90 min with sporadic sonication.
    • Dialyzed and dried.
  4. Amine Functionalization via APTES Silanization

    • 100 mg hydroxylated ND in 30 ml absolute ethanol.
    • 30 µl NH4OH (29.4 wt%) + 20 µl APTES, stirred 24 h.
    • 5× wash with ethanol and water.
  5. NV-ND Thiol Functionalization via Cysteine

    • EDC/NHS activation of terminal -COOH groups.
    • Cysteine coupling via amine terminus; thiol group exposed for downstream chemistry.
  6. FITC Conjugation

    • FITC reacts with -NH2 groups on DND-APTES.
    • FITC reacts with -SH groups on NV-ND-cysteine.
    • 4 h dark reaction at RT with periodic agitation.
  7. Cellular Tracking

    • HeLa cells (60-80% confluence) incubated with 200 µl of 0.004 wt% conjugate.
    • DAPI nuclear counterstain (0.3 µM, 20 min, dark).
    • Confocal imaging: 60× oil objective (NA 1.4), 488 nm laser.
  8. Cytocompatibility Validation

    • Standard MTT assay across multiple conjugate dilutions.
    • Untreated cells as viability control.

The chemistry demonstrated in this study — hydroxylation → APTES silanization → amine-reactive dye (FITC) coupling — is a textbook surface-functionalization route that maps directly onto 6CCVD’s portfolio of engineered diamond substrates and particles.

Research Requirement6CCVD Equivalent Offering
40-150 nm carboxylated nanodiamond particlesCustom-sized PCD / SCD fragments produced via jet-milling or laser cutting
Intrinsic NV fluorescenceHigh-pressure-high-temperature SCD plates with controlled N content, annealed to activate NV centers
Hydroxyl/amine surface chemistryPre-functionalized or as-received surface terminations; advice on Fenton/APTES protocols
High-purity diamond lattice (no DND graphitic shell)MPCVD-grown single-crystal diamond (SCD) vs. detonation material (DND)
  • Optical-Grade SCD (Single Crystal Diamond): For experiments where photostable NV emission and minimal spectral drift are required — directly applicable to the NV-ND-FITC work described here. 6CCVD SCD offers Raman-grade crystallinity suitable for advanced NV magnetometry and quantum sensing extensions.
  • Heavy Boron-Doped PCD (BDD): If the application is extended to electrochemical biosensing combined with fluorescent tracking — BDD electrodes with simultaneous optical readout.
  • Sub-Micron SCD / PCD Powders: Where this study uses 40-150 nm particles, 6CCVD can supply classified MPCVD diamond powders in narrow size distributions (sub-µm to 5 µm) with optional pre-functionalization.
  • Custom Geometries: Although this study used particulates, future iterations could leverage 6CCVD’s SCD plates up to 125 mm or PCD wafers up to 125 mm as biosensor chips — e.g., diamond-on-substrate arrays for parallel cell-interaction studies.
  • Metallization for Device Integration: If the next research stage requires interdigitated electrodes or heater traces on diamond for thermofluidic cell-chamber work, 6CCVD offers in-house metallization with Ti, W, Pt, Au stacks.
  • Laser Cutting & Patterning: Custom geometries, microfluidics channels, or microwell arrays for high-throughput screening can be cut from bulk diamond or PCD substrates with µm-precision.
  • Polishing Specifications: For experiments requiring surface-confined fluorescence (TIRF, waveguide coupling), 6CCVD delivers Ra < 1 nm on SCD and Ra < 5 nm on inch-size PCD — minimizing scattering background that would otherwise compete with weak NV emission.

The transition from fluorescent nanodiamond particulates in solution to solid-state diamond biosensor platforms is non-trivial. Critical parameters — including surface termination (H-, O-, OH-), defect density, and nitrogen concentration for NV formation — all influence fluorescence yield and bioconjugation efficiency. 6CCVD’s in-house PhD engineering team is equipped to advise on:

  • Material selection between SCD and PCD for specific biophotonics applications.
  • Optimal NV-center formation (irradiation fluence + 800 °C vacancy annealing) for custom batches.
  • Surface preparation protocols (oxygen/hydrogen plasma termination) prior to silanization or EDC/NHS coupling.
  • Scalable routes from lab-scale NV-ND studies to wafer-level biosensor arrays.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

The use of nanodiamonds in studies with living systems generally involves the modification of their surfaces with functional groups. Fluorescent molecules can be attached to these groups, so that one can know the exact position of the particles in each moment of the interaction with the cells. Here we modify the surface of detonation nanodiamonds and nitrogen-vacancy center nanodiamonds using carboxylation and hydroxylation procedures. Subsequent reactions with silicates and cysteine, before addition of fluorescein allow to obtain fluorescent nano-conjugates. We used confocal microscopy to observe the position of nanodiamonds interacting with HeLa cells. At 3 h post-incubation the green fluorescence is localized in extracellular rounded like-vesicles assemblies while at 24 h the conjugates can be observed inside the cells. The measurement of the fluorescence emitted by both conjugates allowed to find an enhanced emission of fluorescein isothiocyanate (FITC) when the nitrogen-vacancy center is present. We propose the existence of a fluorescence enhancement by electron transference process. The procedure described in this work allows the functionalization of nanodiamonds with FITC and other molecules using functional surface groups and small size mediators. Also, as was proved in our work, the nanodiamond-fluorescein conjugates can be used to track nanoparticles position within the cell. Localization studies are particularly important for drug delivery applications of nanodiamonds.