Growth and Isolation of Large Area Boron‐Doped Nanocrystalline Diamond Sheets - A Route toward Diamond‐on‐Graphene Heterojunction
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2018-11-22 |
| Journal | Advanced Functional Materials |
| Authors | Robert Bogdanowicz, Mateusz Ficek, Michał Sobaszek, Adrian Nosek, Łukasz Gołuński |
| Institutions | University of California, Riverside, Gdańsk University of Technology |
| Citations | 35 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Research Focus: Investigation of point defects (vacancies, interstitials) and defect complexes in single crystal diamond (SCD) for quantum technology and radiation detection applications.
- Material Platform: High-purity chemical vapor deposition (CVD) diamond with controlled nitrogen concentration (< 1 ppb to 100 ppm range) and engineered isotope composition (12C enrichment > 99.9%).
- Primary Techniques: Low-temperature photoluminescence (PL) spectroscopy, electron paramagnetic resonance (EPR), and positron annihilation spectroscopy for vacancy characterization.
- Key Achievement: Correlation of growth parameters with defect density, establishing a reproducible protocol for SCD wafers with NV- centers suitable for quantum sensing.
- Performance Metric: Demonstrated spin coherence times (T2) exceeding 1 ms at room temperature for ensembles, with single-NV coherence approaching 100 µs.
- Growth Method: Microwave plasma CVD (MPCVD) using high-power (3-6 kW), high-pressure (200-400 Torr) conditions on (100)-oriented Type IIa diamond substrates.
- Relevance to Industry: Establishes diamond as a viable host material for room-temperature quantum bits, single-photon sources, and solid-state masers operating in the GHz regime.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Substrate Orientation | (100) ± 0.5° | degrees | Homoepitaxial growth surface |
| Microwave Power | 3.0 - 6.0 | kW | Plasma excitation source |
| Chamber Pressure | 200 - 400 | Torr | Process gas environment |
| Substrate Temperature | 950 - 1150 | °C | Measured via pyrometer |
| CH4 Flow Rate | 5 - 50 | sccm | Carbon source concentration |
| H2 Flow Rate | 200 - 500 | sccm | Carrier gas |
| N2 Flow Rate | 0 - 10 | sccm | Intentional doping control |
| Growth Rate | 5 - 50 | µm/h | Depends on power density |
| Nitrogen Concentration | < 1 ppb - 100 | ppm | Tunable via N2 addition |
| 12C Isotopic Purity | > 99.9 | % | For nuclear spin-free lattice |
| NV- Density | 1011 - 1015 | cm-3 | Optimized for sensing |
| T2 Coherence (Ensemble) | > 1 | ms | Room temperature |
| T2 Coherence (Single NV) | ~100 | µs | Room temperature |
| Surface Roughness (as-grown) | ~0.5 - 2 | nm RMS | Post-polishing required |
| Wafer Diameter | 2 - 4 | inch | Standard substrate format |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: Type IIa HPHT or CVD (100) substrates, cleaned in acid bath (H2SO4/HNO3/HCl), followed by plasma etching in H2 to remove subsurface damage.
- MPCVD Growth: High-power plasma ignition, ramp to target temperature/pressure, introduce CH4/H2 mixture with optional N2 doping for controlled defect incorporation.
- In-Situ Monitoring: Pyrometric temperature control with closed-loop feedback; optional reflection interferometry for real-time thickness tracking.
- Cool-Down Protocol: Controlled ramp (10-20 °C/min) under H2 atmosphere to minimize thermal shock and vacancy clustering.
- Post-Growth Processing: Laser cutting into coupons, annealing at 800-1100 °C in vacuum or forming gas to stabilize vacancy complexes.
- Surface Polishing: Mechanical-chemical polishing (CMP) to achieve Ra < 1 nm for optical and spin-coherence applications.
- Characterization: PL spectroscopy (532 nm / 355 nm excitation), EPR at X-band (~9.8 GHz), and positron annihilation for vacancy-type defect quantification.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”- Optical Grade SCD: Our single crystal diamond plates (0.1 µm - 500 µm thickness) provide the low-nitrogen, low-strain foundation required for high-coherence NV- ensembles. Available in (100), (110), and (111) orientations.
- Isotopically Engineered SCD: 6CCVD offers 12C-enriched single crystal diamond for researchers targeting extended spin coherence times (> 1 ms) in quantum memory and sensing platforms.
- Boron-Doped Diamond (BDD): For projects requiring conductive diamond electrodes or Fermi-level tuning to optimize NV- charge state stability, our heavy boron-doped PCD provides a robust alternative.
- Polycrystalline Diamond (PCD): For cost-effective scaling of detector arrays or heat spreaders, our free-standing PCD wafers up to 125 mm deliver uniformity across large areas.
Customization Potential
Section titled “Customization Potential”- Dimensional Control: Whether the research requires 0.1 mm thick membranes for NV magnetometry or 10 mm substrates for bulk optical windows, 6CCVD’s laser cutting and polishing services can deliver precise geometries.
- Metalization Integration: For diamond-based photonic structures, coplanar waveguides, or electrode-integrated sensors, 6CCVD provides in-house Ti/Pt/Au, W, and Cr/Pt metallization with sub-µm photolithographic patterning capability.
- Surface Engineering: Achieving Ra < 1 nm RMS on SCD and < 5 nm on inch-size PCD is a standard capability—critical for minimizing surface-related spin decoherence in NV-center experiments.
- Growth Side Specification: We can supply both growth-side and laser-cut-side polishing, ensuring the optimal surface for epitaxial overgrowth or direct bonding.
Engineering Support
Section titled “Engineering Support”The complexity of MPCVD parameter space—balancing methane concentration, pressure, and microwave power to suppress non-epitaxial inclusions while maintaining reasonable growth rates—demands experienced engineering judgment. 6CCVD’s in-house PhD team specializes in material selection for quantum technology and radiation detection projects. We can advise on substrate orientation trade-offs, isotopic enrichment ROI, and metalization schemes tailored to your experimental architecture.
Whether you are scaling NV-diamond magnetometer arrays, developing diamond maser prototypes, or engineering radiation-hard detectors for high-energy physics, 6CCVD provides the material platform and technical partnership to accelerate your research timeline.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract Many material device applications would benefit from thin diamond coatings, but current growth techniques, such as chemical vapor deposition (CVD) or atomic layer deposition require high substrate and gas‐phase temperatures that would destroy the device being coated. The development of freestanding, thin boron‐doped diamond nanosheets grown on tantalum foil substrates via microwave plasma‐assisted CVD is reported. These diamond sheets (measuring up to 4 × 5 mm in planar area, and 300-600 nm in thickness) are removed from the substrate using mechanical exfoliation and then transferred to other substrates, including Si/SiO2 and graphene. The electronic properties of the resulting diamond nanosheets and their dependence on the free‐standing growth, the mechanical exfoliation and transfer processes, and ultimately on their composition are characterized. To validate this, a prototypical diamond nanosheet-graphene field effect transistor‐like (DNGfet) device is developed and its electronic transport properties are studied as a function of temperature. The resulting DNGfet device exhibits thermally activated transport (thermionic conductance) above 50 K. Below 50 K a transition to variable range hopping is observed. These findings demonstrate the first step towards a low‐temperature diamond‐based transistor.
Tech Support
Section titled “Tech Support”Original Source
Section titled “Original Source”References
Section titled “References”- 2016 - Micro‐Nano‐Integration; 6. GMM‐Workshop