Skip to content

Investigation of near-surface defects of nanodiamonds by high-frequency EPR and DFT calculation

MetadataDetails
Publication Date2019-04-04
JournalThe Journal of Chemical Physics
AuthorsZ. Peng, T. Biktagirov, F. H. Cho, U. Gerstmann, S. Takahashi
InstitutionsPaderborn University, University of Southern California
Citations25
AnalysisFull AI Review Included
  • Core Challenge Addressed: Near-surface paramagnetic impurities in nanodiamonds (NDs) degrade Nitrogen-Vacancy (NV) center quantum coherence, limiting the sensitivity of NV-based quantum sensing.
  • Methodology: High-Frequency (HF) Electron Paramagnetic Resonance (EPR) at 230 GHz and 115 GHz, combined with Electron-Electron Double Resonance-Detected NMR (EDNMR) and Density Functional Theory (DFT) calculations.
  • Key Defect Identified: A previously uncharacterized paramagnetic defect (termed “X spin”) with a g-value of 2.0028(3) was isolated in the near-surface shell (~9 ± 2 nm thickness) of milled NDs.
  • Structural Origin: DFT modeling and EDNMR analysis rule out hydrogen and nitrogen complexes, identifying the negatively charged monovacancy (V-) as the most probable structure, with a calculated D-value of < 30 MHz.
  • Material Provenance: The study utilized Type-Ib High-Pressure High-Temperature (HPHT) synthetic diamond crystals, mechanically milled into powders and nanodiamonds (30 nm to 10 µm) to simulate surface damage.
  • Implication for Sensing: The presence of dense vacancy-related defects in the outer 9 nm shell explains the fast spin relaxation and unstable photoluminescence observed in shallow NV centers.
  • Pathway to Improvement: Identifying and mitigating the V- defect generation mechanism during the milling process is critical for producing high-coherence NDs for quantum applications.
ParameterValueUnitContext
X spin g-value (Experimental)2.0028 ± 0.0003(unitless)Broadened paramagnetic defect in ND shell
X spin g-value (DFT V-)2.00276(unitless)Calculated negatively charged monovacancy
V- Zero-Field Splitting (D)< -30MHzShell-symmetry lifted by local strain
V0 Zero-Field Splitting (D)6053MHzRuled out as X spin due to large D
NV- Zero-Field Splitting (D)2830MHzRuled out as X spin structure
X spin EPR Linewidth (50-nm ND)1.00mTMeasured at 230 GHz
X spin EPR Linewidth (50-nm ND)0.24mTMeasured at 9.3 GHz (X-band)
Near-Surface Shell Thickness9 ± 2nmCore-shell model fit for X spin localization
EPR Frequencies Employed9.3, 115, 230GHzMulti-frequency spectral resolution
Superconducting Magnet Field12.1TeslaCryogenic-free, used for HF EPR
HF Microwave Output Power100 (230 GHz) / 700 (115 GHz)mWSolid-state source multiplier output
Magnetic Field Modulation (HF)0.02mTModulation frequency: 20 kHz
Base MaterialType-Ib HPHT Synthetic(N/A)Nitrogen concentration: 10 - 100 ppm
P1 Center g-value (Reference)2.0024(unitless)Isotropic reference for substitutional N
  • Sample Preparation: Utilized Type-Ib HPHT single crystal diamond (1.5 x 1.5 x 1.0 mm3) mechanically crushed/milled into 10 µm powders and eight batches of nanodiamonds (sizing from 30 ± 10 nm to 550 ± 100 nm).
  • Multi-Frequency EPR Spectroscopy:
    • X-band (9.3 GHz): Continuous-wave (cw) EPR for initial broad linewidth characterization.
    • High-Frequency (115 GHz / 230 GHz): Performed on a home-built quasi-optical bridge system with a 12.1 T cryogenic-free magnet to resolve overlapping g-values.
  • EDNMR Spectroscopy (115 GHz):
    • Executed a High Turning Angle (HTA) pulse sequence to probe nuclear hyperfine couplings.
    • Detection Target: Monitored the cross-transition frequency offset to detect 1H and 14N couplings.
    • Result: Noise level of ~0.2% established detectable hyperfine limits (Ax,y = ±10 MHz, Az range -10 to 30 MHz), ruling out H1 and H2 hydrogen-related defects.
  • DFT Computational Framework:
    • Software: Quantum ESPRESSO package utilizing the GIPAW pseudopotential formalism.
    • Simulations: Calculated g-tensors and zero-field splitting (ZFS) for isolated N-impurities and vacancy-related defects in modeled ND shell regions.
  • Spectral Analysis Fitting: Employed the EasySpin toolbox to separate overlapping P1 and X spin contributions, utilizing Lorentzian fits for P1 and Voigt function fits for X spins.

Leveraging 6CCVD’s precision manufacturing capabilities, the findings of this research—specifically the detrimental impact of V- defects and paramagnetic impurities on near-surface NV coherence—can be directly addressed. For researchers aiming to replicate or extend this work, 6CCVD provides the foundational material engineering required for high-purity quantum sensing platforms.

  • Applicable Materials:
    • Optical Grade Single Crystal Diamond (SCD): Required as a baseline substrate. SCD eliminates the grain boundary noise inherent to PCD, ensuring clean isolation of intrinsic NV and P1 spin signals.
    • Isotopically Engineered SCD: For ultimate coherence time (T2) extension beyond this paper’s defect characterization, 6CCVD can supply SCD with depleted 13C to suppress the nuclear spin bath.
    • High-Purity Polycrystalline Diamond (PCD): Applicable for thick-film NV sensing platforms. Available up to 125 mm diameters to provide an alternative to the milled NDs studied in this paper.
  • Customization Potential:
    • Surface Engineering: The paper’s “core-shell” model identifies a 9 nm defect layer as the primary source of decoherence. 6CCVD offers custom thickness SCD and PCD films (ranging from 0.1 µm to 500 µm) produced via MPCVD, allowing for precise control over active sensing layers and minimizing bulk impurity inclusions.
    • Surface Termination & Polishing: 6CCVD delivers ultra-smooth surfaces (Ra < 1 nm for SCD) critical for eliminating mechanical strain-induced defects on NV centers. Furthermore, we provide custom laser cutting and shaping to exact dimensions for bespoke resonator geometries.
    • Metallization for Quantum Devices: For researchers transitioning from EPR spectroscopy to solid-state device fabrication (e.g., microwave coplanar waveguides for spin manipulation), 6CCVD provides internal Au, Pt, Pd, Ti, W, and Cu metallization. This ensures robust, low-loss electrical integration directly on the diamond surface.
  • Engineering Support:
    • The identification of V- as the dominant surface defect highlights the necessity of material purity for shallow NV implants. 6CCVD’s in-house PhD engineering team can assist with material selection, advising on the optimal combination of CVD growth parameters and post-processing treatments to mitigate near-surface paramagnetic impurities for your specific NV-Based Quantum Sensing projects.
  • Call to Action:
    • For custom specifications, material consultation, or to discuss bulk diamond requirements for advanced quantum research, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

Nanodiamonds (NDs) hosting nitrogen-vacancy (NV) centers are a promising platform for quantum sensing applications. Sensitivity of the applications using NV centers in NDs is often limited due to the presence of paramagnetic impurity contents near the ND surface. Here, we investigate near-surface paramagnetic impurities in NDs. Using high-frequency (HF) electron paramagnetic resonance spectroscopy, the near-surface paramagnetic impurity within the shell of NDs is probed and its g-value is determined to be 2.0028(3). Furthermore, HF electron-electron double resonance-detected nuclear magnetic resonance spectroscopy and a first principles calculation show that a possible structure of the near-surface impurity is the negatively charged vacancy V−. The identification of the near-surface impurity by the present investigation provides a promising pathway to improve the NV properties in NDs and the NV-based sensing techniques.