Skip to content

CVD growth of ultrapure diamond, generation of NV centers by ion implantation, and their spectroscopic characterization for quantum technological applications

MetadataDetails
Publication Date2019-06-26
JournalPhysical Review Materials
AuthorsT. Chakraborty, F. Lehmann, J. Zhang, S. Borgsdorf, N. Wöhrl
InstitutionsUniversity of Duisburg-Essen, Ruhr University Bochum
Citations22
AnalysisFull AI Review Included
  • Material Objective: Synthesis and characterization of ultra-pure homoepitaxial single-crystal diamond (SCD) films for deterministic nitrogen-vacancy (NV) center generation, targeting quantum sensing and quantum information applications.
  • Growth Achievement: Microwave-assisted chemical vapor deposition (MPCVD) of high-purity SCD films with a thickness of approximately 265 µm at a growth rate of about 30 µm/h.
  • Purity Threshold: Residual nitrogen concentration measured at or below 1.3 × 10-7 (approximately 0.1 ppm), placing the films among the purest commercially available diamond substrates.
  • Ion Implantation Innovation: Novel in-situ ultra-high vacuum (UHV) hot implantation process at 700 °C to prevent surface charging effects and beam defocusing on non-terminated diamond surfaces.
  • NV Localization: Precise creation of NV ensembles with controlled spot sizes ranging from ~15 µm to ~200 µm, with NV center depths of 7-10 nm below the surface (implantation energy range 400 eV to 5 keV).
  • Quantum Performance: Coherence time (T2) extended through dynamical decoupling sequences (CPMG-64), achieving projected AC magnetic field sensitivity of approximately 10 nT Hz-1/2.
  • Characterization Infrastructure: Custom confocal microscope combining 70 µm × 70 µm nanopositioning with motorized micropositioning, enabling large-area photoluminescence (PL) mapping with sub-micron resolution and a spot size diameter of 0.46 µm.

ParameterValueUnitContext
Substrate TypeElectronic Grade SCD—Element Six homoepitaxial growth substrate
Film Thickness~265µmBulk-like high-purity CVD-grown layer
Growth Rate~30µm/hConstant high crystal quality
Residual Nitrogen (Upper Limit)1.3 × 10-7 (~0.1 ppm)—Below standard analytical detection limits
Ion Implantation Energy Range400 eV - 5 keVeVDetermines NV depth
NV Center Depth7 - 10nmShallow centers for sensing applications
Implantation Dose (S4)1 × 1017cm-2Large-area confocal mapping
Implantation Dose (S5, 4 dots)1 × 1015cm-2Localized NV spot generation
Implantation Dose (S5, 2 dots)1 × 1012cm-2Low-density reference spots
Hot Implantation Temperature700°CUHV, prevents surface charging
Post-Annealing Temperature800°CDuration: 2 hours, UHV conditions
UHV Base Pressure5 × 10-10mbarImplantation/annealing chamber
Surface Conductance at 700 °C1 × 10-6S/mNon-terminated diamond (bare)
Hydrogen-Terminated Conductance~10-4S/mRoom temperature, atmospheric exposure
Ion Beam Current (S1)~100µAEmission current, spot diameter ~200 µm
Ion Beam Current (S4/S5)500pAAperture-defined spot diameter ~25 µm
Implantation Spot Size (S5)∆x = 15, ∆y = 27µmMatches aperture geometry
NV Concentration (Projected)22ppmHigh-density ensemble
Coherence Time T2*3.6µsFree induction decay
Projected DC Sensitivity (ηdc)~100nT Hz-1/2Ideal measurement conditions
Projected AC Sensitivity (ηac)~10nT Hz-1/2CPMG(64) dynamical decoupling
NV0 ZPL Wavelength575nmZero phonon line, neutral charge state
NV- ZPL Wavelength637nmZero phonon line, negative charge state
Defect Peak589nmIon-implantation-induced point defects
Excitation Laser Wavelength532nmCW diode-pumped solid-state
AOM Extinction Ratio57dBLaser switching
Objective Numerical Aperture1.4—Oil immersion microscope objective
Confocal Spot Size Diameter0.46µmResolution limit
NP Stage Range (XY)70 × 70µmNanopositioning piezo stage
NP Stage Range (Z)50µmDepth profiling capability
MP Stage Scan Area25 × 25mmLarge-area PL mapping
Microwave Power (Post-Amp)16WSpin transition excitation
Mapping Resolution (S1-S3)2 × 2 mm2, 50 × 50 pixel2—Renishaw Raman spectrometer PL map

  1. Substrate Preparation: Hydrogen-terminated or bare (non-terminated) electronic-grade SCD substrates precleaned with isopropanol and acetone; thermal treatment at 800 °C in UHV to remove surface termination and adsorbates.
  2. MPCVD Diamond Growth: Custom microwave-assisted CVD reactor configured for homoepitaxial SCD film deposition with minimized nitrogen incorporation, yielding ~265 µm thick films at ~30 µm/h.
  3. Surface Termination Control: Optional heating at 800 °C under UHV to convert hydrogen-terminated surfaces to bare, non-terminated diamond (eliminates surface conductivity from atmospheric adsorbates).
  4. In-Situ Hot Implantation: Nitrogen ion implantation performed at 700 °C under UHV conditions (5 × 10-10 mbar) to suppress surface charging on insulating bare diamond surfaces.
  5. Aperture-Defined Localization: Physical apertures used to define implantation spot sizes (~15-27 µm diameter) at reduced beam currents (500 pA), enabling deterministic NV ensemble placement.
  6. Post-Implantation Annealing: UHV thermal treatment at 800 °C for 2 hours to mobilize vacancies and promote NV center formation without inducing graphitization.
  7. Confocal PL Microscopy: Home-built scanning confocal microscope (532 nm excitation, 550 nm long-pass filter, photon-counting detection) with combined NP/MP positioning for large-area mapping.
  8. Spectral Identification: Zero phonon line (ZPL) detection at 575 nm (NV0) and 637 nm (NV-) confirms successful NV formation; 589 nm peak monitors implantation-induced defects.
  9. Coherence Characterization: Ramsey, Hahn-echo, CPMG, and Uhrig dynamical decoupling (UDD) pulse sequences applied to measure T2* and extend T2.
  10. Sensitivity Projection: Calculated magnetic field sensitivity η based on NV concentration (N), coherence time (T2), and readout contrast.

  • Optical Grade SCD (Single Crystal Diamond): The 6CCVD optical-grade SCD platform directly matches the ultra-pure homoepitaxial film requirements demonstrated in this work. Our SCD substrates can be supplied with customizable nitrogen specifications, supporting the pursuit of sub-ppb nitrogen content for quantum-grade applications.
  • Isotopically Purified 12C Diamond: As the authors note, future sensitivity improvements depend on reducing 13C below 0.01%. 6CCVD can supply isotopically enriched 12C SCD to advance T2 beyond the values reported here.
  • Electronic Grade SCD Substrates: Available for homoepitaxial overgrowth applications analogous to the Element Six substrates used in this study, with thicknesses up to 10 mm.
  • Film Thickness Range: 6CCVD offers SCD films from 0.1 µm to 500 µm, covering both the 265 µm “bulk-like” films demonstrated here and the ultra-thin (few nm to sub-µm) layers the authors cite as customizable for shallow NV depth optimization.
  • Laser Cutting & Dicing: Custom shapes and dimensions for sample preparation (e.g., 2 × 2 mm2 mapping coupons or larger 25 × 25 mm scan-compatible substrates) are available through our precision laser cutting services.
  • Metalization for Electrical Spin Readout: The authors identify precise NV placement between electrodes as critical for quantum applications. 6CCVD provides in-house metalization with Au, Pt, Pd, Ti, W, and Cu, enabling fabrication of customized electrode geometries (e.g., Ti/Pt/Au stacks) for spin readout and microwave delivery structures.
  • Surface Termination Engineering: Both hydrogen-terminated and bare (non-terminated) diamond surfaces can be supplied to support the authors’ comparative studies on implantation behavior.
  • Quantum Sensing & NV Center Applications: 6CCVD’s in-house PhD engineering team can assist with material selection for NV-based quantum sensing, quantum memory, and magnetometry projects, including guidance on purity grades, crystal orientations, and isotopically enriched options.
  • Process Integration Consultation: Our team can advise on substrate specifications tailored for CVD overgrowth, ion implantation workflows, and metallization schemes compatible with confocal/microwave measurement platforms.
  • Scalable Supply: For research groups transitioning from proof-of-concept to scaled device fabrication, 6CCVD supports production volumes with consistent material quality.

For custom specifications, isotopically purified 12C diamond inquiries, or material consultation on quantum technology projects, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Applications of nitrogen-vacancy (NV) centers in diamond in quantum technology have attracted considerable attention in recent years. Deterministic generation of ensembles of NV centers can advance the research on quantum sensing, many-body quantum systems, multipartite entanglement, and so on. Here we report the complete process of controlled generation of NV centers in diamond as well as their characterization: growing diamond films through chemical vapor deposition (CVD), ion implantation, and spectroscopic characterization of the defect centers using a confocal microscope. A microwave-assisted CVD setup is presented which we constructed for the preparation of single-crystalline homoepitaxial diamond films. The films were prepared with minimized nitrogen concentration, which is confirmed through photoluminescence measurements. We demonstrate an in situ ultrahigh vacuum (UHV) implantation and heating process for creation of NV centers using a novel experimental setup. For the first time hot implantation has been shown which prevents surface charging effects. We do not observe graphitization due to UHV heating. By optimizing the implantation parameters it has been possible to implant NV centers in a precise way. We present large area mapping of the samples to determine the distribution of the centers and describe the characterization of the centers by spectroscopic techniques. Reducing the decoherence caused by environmental noise is of primary importance for many applications in quantum technology. We demonstrate improvement on coherence time ${T}_{2}$ of the NV spins by suppression of their interaction with the surrounding spin bath using robust dynamical decoupling sequences.