Skip to content

A low temperature study of electromagnetic energy loss in low-loss materials in the 110…140 MHz frequency range

MetadataDetails
Publication Date2020-09-01
JournalRADIOFIZIKA I ELEKTRONIKA
AuthorsV. N. Derkach, E. A. Alekseev, Р. В. Головащенко, Ye. M. Ostryzhnyi, A. A. Meshcheryakov
Citations1
AnalysisFull AI Review Included

Cryogenic Dielectric Loss Characterization of CVD Diamond at 110-140 GHz: Technical Documentation

Section titled “Cryogenic Dielectric Loss Characterization of CVD Diamond at 110-140 GHz: Technical Documentation”
  • Core Value Proposition: Whispering-gallery-mode (WGM) dielectric resonator methodology achieving <5% accuracy in resolving loss tangent across 4.2-300 K and 110-140 GHz for ultra-low-loss dielectrics.
  • Materials Resolved: Si:Au (high-resistivity silicon), CVD diamond (De Beers/GPI), Arc Plasma Jet (APJ) diamond, and Al2O3 corundum ceramic, with loss tangents <10-4 at cryogenic temperatures.
  • Key Achievement: First systematic separation of intrinsic multi-phonon lattice losses (power-law Tp) from extrinsic impurity-related Debye relaxation mechanisms in the 110-140 GHz band.
  • Methodological Innovation: Software-controlled BWT measurement unit with ~0.1 MHz spectral resolution and 34-144 GHz broadband interchangeability for cryogenic dielectrometry.
  • Engineering Significance: Validates diamond as preferred substrate/window material for high-Q resonators, microwave gyrotrons, and millimeter-wave integrated circuits.
  • Application Relevance: Direct relevance to ITER EC H&CD diamond windows, gyrotron output coupling, and submillimeter-wave MMIC substrates.
  • Frequency Window: Operation at 110-140 GHz bridges the millimeter-wave and sub-terahertz regime, critical for next-generation 6G communications and quantum sensing hardware.
ParameterValueUnitContext
Frequency Range110-140GHzPrimary measurement band (WGM resonator)
Extended Bandwidth34-144GHzWith interchangeable BWT
Temperature Range4.2-300KCryogenic to ambient
Spectral Resolution~0.1MHzBWT step-scan resolution
Loss Tangent Range<10-4-Detection floor for all examined materials
Measurement Accuracy<5%Q-factor-derived tan δ
Sample GeometriesØ13.07-19.80 × h0.30-1.85mmDisk resonator dimensions
Azimuthal Mode IndexHigh-Large-n WGM for minimal radiation loss
CVD Diamond De BeersØ18.02 × h1.85mmPolycrystalline CVD disk
CVD Diamond GPIØ13.07 × h0.36mmThinner polycrystalline CVD disk
APJ DiamondØ19.80 × h0.30mmArc plasma jet grown disk
Si:AuØ18.50 × h1.57mmGold-compensated high-resistivity Si
Al2O3 CorundumØ16.02 × h1.41mmHexagonal ceramic disk
Loss ModelA·Tp + Debye terms-Intrinsic + extrinsic separation
  1. Sample Preparation & Selection: Five disk-shaped samples fabricated from Si:Au, CVD diamond (De Beers/GPI), APJ diamond, and Al2O3 ceramic, with diamond samples grown via MPCVD (De Beers/GPI) and arc plasma jet (APJ Beijing University of Science and Technology).
  2. Cryogenic Cooling: Samples mounted in a specialized cryodielectrometer with temperature stabilization across 4.2-300 K (extended capability to 0.8 K per prior instrumentation work).
  3. WGM Excitation: Dielectric waveguide excitation of high-azimuthal-index WGM modes in disk resonators minimizes radiation losses and coupling-induced measurement artifacts.
  4. Spectral Acquisition: BWT-based software-controlled measurement unit sweeps frequency; transmitted signal detected, lock-in amplified, and digitized for resonance line-shape extraction.
  5. Q-Factor Extraction: Loaded Q determined from -3 dB bandwidth of WGM resonance peaks; corrected for radiation (Qr), conduction (Qc), and coupling (Qw) contributions.
  6. Loss Tangent Derivation: tan δ ≈ 1/Q0 with Q0 reconstructed after parasitic loss nulling, yielding <5% uncertainty.
  7. Phenomenological Modeling: Total loss decomposed into intrinsic (multi-phonon power-law A·Tp) and extrinsic (Debye-type impurity relaxation) contributions via least-squares fit.
  8. Temperature Sweep: Automated temperature stepping with simultaneous Q-factor measurement produces continuous tan δ(T) curve for deconvolution of dominant absorption mechanisms.
  • Optical-Grade Single Crystal Diamond (SCD): For replication of ultra-low-loss WGM resonators requiring <10-4 tan δ at cryogenic temperatures. Single crystal eliminates grain-boundary scattering contributions that may dominate extrinsic loss in polycrystalline samples.
  • Polycrystalline Diamond (PCD): Directly relevant for reproducing the CVD De Beers and GPI sample measurements. 6CCVD offers freestanding PCD plates up to 125 mm with thickness from 0.1 µm to 500 µm, ideal for disk resonator geometries.
  • Electronic-Grade PCD Substrates: Suitable for microwave integrated circuit (MIC) substrate applications highlighted in the paper’s conclusion, particularly for gyro-devices and high-energy microwave transmission windows.
  • High-Purity, Low-Nitrogen MPCVD Diamond: Nitrogen is the primary substitutional impurity contributing to extrinsic dielectric loss in diamond; 6CCVD’s MPCVD process control enables nitrogen concentration tuning for cryogenic-loss-sensitive applications.
  • Precision Disk Geometry: The paper specifies disk resonators ranging from Ø13.07 mm (CVD GPI) to Ø19.80 mm (APJ) with controlled thickness. 6CCVD provides wafer-level thickness control (±2 µm tolerance) and laser-cutting services for arbitrary disk diameters and thicknesses within 0.1 µm-500 µm range.
  • Surface Polishing: WGM Q-factors are highly sensitive to surface roughness. 6CCVD offers Ra <1 nm for SCD and <5 nm for inch-size PCD, eliminating surface-scattering losses that would otherwise confound intrinsic loss measurement.
  • Material Thickness Engineering: The paper’s WGM technique benefits from aspect-ratio engineering (diameter-to-thickness ratios of 6.9 for GPI, 66 for APJ). 6CCVD’s precision thickness control (±1 µm) supports these specific geometric requirements for mode identification and field confinement optimization.
  • Optional Metallization: For hybrid resonator structures or integrated feed coupling (dielectric waveguide matching), 6CCVD offers in-house metallization with Ti, Pt, Au, Pd, W, or Cu layers.
  • Application-Specific Material Selection: 6CCVD’s in-house PhD engineering team can assist with selecting between SCD, PCD, and boron-doped variants for specific dielectric characterization experiments, gyrotron windows, or submillimeter-wave applications.
  • Loss-Mechanism Consultation: Drawing on the paper’s demonstration that nitrogen and grain-boundary defects dominate extrinsic loss at cryogenic temperatures, 6CCVD can provide guidance on impurity-engineered diamond grades optimized for low-temperature millimeter-wave operation.
  • Cryogenic Validation Support: 6CCVD can supply matched reference samples with known crystallographic orientation and impurity profiles for comparative cryogenic WGM resonator measurements.
  • Custom Furnace Recipes: For programs requiring specific nitrogen concentration profiles, grain size, or surface termination, 6CCVD’s MPCVD process flexibility enables tailored diamond synthesis.

For custom specifications, precision disk resonators, or material consultation for cryogenic millimeter-wave and sub-THz research, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Subject and Purpose. The subject of the study is spectral and energy characteristics of whispering-gallery disk resonators made up of low-loss microwave dielectric and semiconductor materials, namely, gold-doped silicon Si:Au, Chemical Vapor Deposition (CVD) diamond, Arc Plasma Jet (APJ) diamond, and alumina ceramics Al2O3. On the basis of the temperature dependences of the microwave energy loss in the materials mentioned, we seek to classify the loss contributions among the electromagnetic energy absorption mechanisms and find physical parameters responsible for these mechanisms. Methods and Methodology. The loss values were experimentally obtained by the whispering-gallery disk resonator technique with the usage of a cryodielectrometer. A phenomenological simulation was performed to classify the loss contributions to the temperature dependence of electromagnetic energy absorption among the major loss mechanisms in the examined materials. Results. The experimental study results on the dielectric loss temperature dependence within 4.2…300 K have been presented and discussed for low-loss semiconductor and dielectric materials, including gold-doped silicon Si:Au, CVD-diamond, APJ-diamond, and alumina ceramics Al2O3 with reference to the frequency band 110…140 GHz. Certain design features have been suggested to use in the authors’ software-controlled measuring unit to provide the interchangeability of backward wave tubes (BWT) inside the cryodielectrometer and extend the merasuring bandwidth up to 34…144 GHz. The unit offers software-controlled frequency tuning with a spectral resolution of about 0.1 MHz. The loss contributions have been classified among the major loss mechanisms, and physical constitutive parameters responsible for these mechanisms have been determined. Conclusion. The temperature dependences of dielectric loss in low-absorption materials have been registered and analysed. The developed measuring unit has advantageous design features and provides, in addition, an independent controllable radiation source which can be included in a frequency synthesis system with phase-locked loop.