Skip to content

Application of high-thermal-conductivity diamond for space phased array antenna

MetadataDetails
Publication Date2021-01-02
JournalFunctional Diamond
AuthorsWei Lu, Jin Li, Jianyin Miao, Liangxian Chen, Junjun Wei
InstitutionsUniversity of Science and Technology Beijing, China Academy of Space Technology
Citations22
AnalysisFull AI Review Included
  • Application: Spaceborne Ka-band active phased array antenna thermal management for inter-satellite links.
  • Material Challenge: T/R module heat flux up to 50 W/cm2 in micron-scale GaAs chips, constrained by a 2.8 mm gap preventing heat-pipe use.
  • Solution: Free-standing polycrystalline diamond (PCD) films fabricated via Direct Current (DC) arc-plasma jet CVD.
  • Performance Achieved: Thermal conductivity up to 2000 W/(m·K) — roughly 5× copper and 10× aluminum.
  • In-Orbit Validation: Deployed across four satellites; T/R module temperature gradient maintained below 2.2 °C, far exceeding the ≤10 °C specification.
  • Operational Lifespan: Validated for continuous operation over 15 years within a −10 °C to 50 °C thermal envelope.
  • Key Achievement: Successful scale-up for batch production of large-diameter, high-thermal-conductivity diamond components integrated into satellite transceiver assemblies.
ParameterValueUnitContext
Diamond Thermal Conductivity≥2000W/(m·K)Measured at room temperature, DC arc-plasma jet CVD film
Operating Temperature Range−10 to 50°CT/R module specification for orbital environment
Required T/R Module Temp. Gradient≤10°COriginal engineering requirement
Achieved T/R Module Temp. Gradient<2.2°CFlight data from deployed satellites
GaAs Chip Heat Fluxup to 50W/cm2Exceeds general heat pipe transfer limits
Avg. T/R Module Heat Consumption1WPer module thermal load
Transceiver Geometric Distance2.8mmGap between front/back T/R module sides
Min. Aerospace Heat Pipe Size3.1mmExceeds available geometry, ruling out heat pipes
Al Alloy Estimated Temp. Difference~23.6°CCenter-to-edge transceiver component using aluminum
Raman Diamond Peak Position~1332cm−1Characteristic sp3 diamond phase confirmation
Target Orbital Lifespan>15yearsContinuous duty cycle requirement
LTCC Thermal Conductivity~2W/(m·K)Baseline chip substrate value (reference)
  • Synthesis Method: Direct Current (DC) arc-plasma jet CVD selected over HFCVD and MPCVD for optimal balance of size, thermal conductivity, and batch cost.
  • Substrate Selection: Diamond grown as free-standing polycrystalline films (plates) rather than coated substrates to maximize bulk thermal transfer.
  • Material Sizing: Plates scaled to match the active transceiver component layout, accommodating densely packed T/R modules on both sides.
  • Characterization:
    • Raman spectroscopy to verify phase purity and crystalline quality (peak near 1332 cm−1).
    • Thermal conductivity measurement plotted against production batch numbers to validate manufacturing consistency.
    • SEM imaging at 200× magnification to inspect film microstructure and bonding surfaces.
  • Assembly & Integration:
    • High-precision assembly of the diamond plate into a metal structural frame.
    • Thermal matching design between the diamond film and frame materials to minimize contact resistance.
    • Solid-state conduction/radiation pathway replaces two-phase heat transfer (heat pipes).
  • Validation Pipeline:
    • Ground thermal-vacuum testing simulating orbital heat loads.
    • In-orbit telemetry from four launched satellites to confirm gradient performance.
  • Applicable Materials:
    • For replicating the demonstrated thermal performance, High Thermal Conductivity Free-Standing PCD (Polycrystalline Diamond) is the direct equivalent. 6CCVD’s PCD plates are engineered specifically for bulk heat-spreading applications like this phased array design. Where single-crystal thermal conductivity is required (e.g., >2200 W/(m·K) thermal benchmarking), Optical Grade SCD plates are available.
  • Customization Potential:
    • The paper highlights diamond plates cut to fit custom transceiver geometries with tight tolerances. 6CCVD supports custom PCD wafer dimensions up to 125 mm, with thicknesses from 0.1 µm to 500 µm — and substrate configurations up to 10 mm — accommodating the exact form factors needed for T/R module stacks and narrow 2.8 mm cavities.
    • 6CCVD provides internal metallization with Ti, W, Au, Pt, Pd, and Cu. The thermal matching interface described in the paper (diamond-to-metal frame) typically requires Ti or W adhesion layers followed by Au or Pt finishes — all of which can be deposited in-house to eliminate assembly contact resistance.
    • Laser cutting and dicing services are available to produce the precise shapes required for embedding between T/R module arrays.
  • Engineering Support:
    • 6CCVD’s in-house PhD engineering team can assist with material selection, thermal modeling guidance, and metallization stack design for satellite thermal control, GaAs/GaN chip cooling, and high-power RF window projects. We routinely support customers transitioning from legacy heat-pipe or Al-alloy thermal designs to diamond-based architectures.
  • Next Steps:
    • For custom specifications, metallization stack design, or material consultation on high-thermal-conductivity diamond for space, RF, or high-power electronics, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

Active phased array antenna typically featured high performance, high device integration, and high heat flux, making it difficult to dissipate heat. Diamond, the substance with the closest arrangement of atoms in nature, has the advantages of a high thermal conductivity and strong adaptability to the space environment. The batch applications of high-thermal-conductivity diamonds for the thermal management of the phased array antennas of the inter-satellite links were introduced in this paper. The diamond was developed by the direct-current arc-plasma chemical vapor deposition method. The product size, thermal conductivity, precision, and application scale all met the engineering requirements. The high-precision assembly of the diamond and the structural frame enabled the efficient heat collection and transfer from the distributed point heat sources of multiple transmit/receive (T/R) modules. Verified on the ground, the thermal matching design between the diamond and the metal frame exhibited an outstanding heat dissipation performance. After four satellites using the diamonds were launched, the flight data showed good antenna thermal control, with temperature gradients of the T/R modules less than 2.2 °C, further verifying the rationality and effectiveness of using high-thermal-conductivity diamonds in the thermal design and implementation of antennas.

  1. **** - The 11th Space Thermal Physics Conference
  2. **** - The 7th Shanghai Conference on Aerospace Science and Technology Innovation and Development
  3. 1979 - The properties of diamond[M]