Progress in semiconductor diamond photodetectors and MEMS sensors
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2021-01-02 |
| Journal | Functional Diamond |
| Authors | Meiyong Liao |
| Institutions | National Institute for Materials Science |
| Citations | 206 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Dual-Application Review: Comprehensive overview of Single-Crystal Diamond (SCD) applications in two advanced domains: solar-blind Deep-Ultraviolet (DUV) photodetectors and Microelectromechanical Systems (MEMS) sensors, demonstrating diamond’s superiority over conventional semiconductors (Si, GaN, SiC, Ga2O3).
- The 5S Requirement: Established evaluation framework for DUV detectors requiring high Sensitivity, Signal-to-Noise ratio, Spectral selectivity, Speed, and Stability. Only SCD fulfills all 5S criteria; polycrystalline variants fall short due to sp2 carbon impurities.
- Extreme Material Properties: Diamond’s ultra-wide bandgap (5.5 eV), thermal conductivity (22 W/mm·K), breakdown field (>10 MV/cm), and Young’s modulus position it as the ultimate semiconductor for harsh-environment sensing.
- DUV Photodetector Performance: Achieved responsivity up to 230 A/W at H-plasma-treated surfaces; photocurrent enhancement of 105; DUV/visible rejection ratio reaching 104; cut-off wavelength at 280 nm enabling true solar-blind operation.
- MEMS Resonator Breakthroughs: Quality factor (Q) exceeding 106 in single-crystal diamond nanomechanical resonators through annealing protocols (500°C, oxygen ambient), enabling magnetic field sensing at temperatures up to 773 K.
- Micromachining Innovation: Novel fabrication routes including Diamond-on-Insulator (DOI), ion-implantation lift-off, and Faraday cage angled-etching enable batch production of free-standing diamond cantilevers, bridges, and nanowires.
- Hybrid Sensor Architectures: Integration of magneto-strictive Galfenol (FeGa) films with diamond MEMS resonators creates Lorentz-force and delta-E effect magnetic sensors operational from cryogenic to 773 K temperatures.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Bandgap Energy | 5.5 | eV | Ultra-wide bandgap enabling solar-blind DUV detection |
| Cut-off Wavelength | 280 | nm | Solar-blind detection threshold (no visible response) |
| Thermal Conductivity | 22 | W/mm·K | Highest among all known semiconductors |
| Breakdown Electric Field | >10 | MV/cm | Power electronics capability |
| Young’s Modulus | Highest in nature | GPa | Mechanical stiffness for MEMS |
| Maximum Responsivity (DUV) | 230 | A/W | H-plasma treated MSM photodetector |
| DUV/Visible Rejection Ratio | 104 | - | Selectivity at 210 nm vs. visible light |
| Photocurrent Enhancement (H-plasma) | 105 | - | Versus untreated diamond surface |
| Boron Doping Threshold (High Gain) | >1017 | cm-3 | Required for sub-surface pn-junction gain |
| Photoconductive Gain (MSM) | >104 | - | At high boron doping levels |
| Response Time (UNCD Nanowire) | ~20 | ms | Boron-doped ultrananocrystalline diamond + Pt NPs |
| UV/Visible Rejection (UNCD) | 105 | - | At 300 nm, zero-bias self-powered operation |
| Quality Factor (Diamond MEMS) | >106 | - | SCD nanomechanical resonator post-annealing |
| Resonator Frequency | 432.56 | kHz | Diamond MEMS bridge example |
| Membrane Thickness (DOI) | 1.21-1.44 | µm | Thinned single-crystal diamond membranes |
| Membrane Thickness (Ultra-thin) | 100 | nm | Silicon-based diamond membrane |
| Resonator Length (L) | 100 | µm | Typical cantilever/bridge dimension |
| Resonator Width (W) | 6 | µm | Typical lateral dimension |
| Annealing Temperature | 500 | °C | Oxygen ambient to reduce surface dissipation |
| Annealing Duration | 20-30 | hours | For Q-factor optimization |
| Magnetic Sensing Range | 0-3 | mT | Galfenol-diamond resonator sensitivity |
| Operating Temperature (Magnetic) | 300-773 | K | High-temp magnetic field detection |
| Carrier Mobility (Holes) | High | cm2/V·s | P-channel MOSFET operation |
| Resonator Etching Rate | 0.5 | nm/hr | Controlled diamond thinning |
Key Methodologies
Section titled “Key Methodologies”- SCD Growth via MPCVD: Microwave Plasma Chemical Vapor Deposition on HPHT or CVD SCD substrates; mosaic cloning for inch-size wafers; heteroepitaxial growth on iridium for large-area single crystals.
- Surface Termination Engineering: H-plasma treatment to enhance DUV photocurrent by 105; O-termination for low dark current; UV-ozone modification to tune surface conductivity.
- MSM Photodetector Fabrication: Interdigitated finger geometry with symmetric Schottky or Ohmic contacts (Au, Pt, WC, Ti); thermally stable Schottky diodes using tungsten carbide (WC) contacts.
- Diamond-on-Insulator (DOI) Process: Diamond bonding to SiO2/Si template via HSQ spin-on; thinning and lithographic release of free-standing diamond membranes (1.21-1.44 µm thickness).
- Ion Implantation Lift-Off: High-dose ion implantation creates graphite-like buried layer; electrochemical or annealing-based separation produces free-standing diamond cantilevers and bridges.
- Faraday Cage Angled-Etching: Anisotropic reactive ion etching (RIE) using Al/Ti metal mask in inductively coupled plasma; produces nanowires, photonic crystal cavities, and nanostructures in bulk diamond.
- Quality Factor Enhancement Protocol: Thermal annealing in oxygen ambient at 500°C for 20-30 hours to reduce surface effect dissipation; achieves Q > 106 in single-crystal diamond nanoresonators.
- MEMS Magnetic Sensor Integration: Sputter deposition of magneto-strictive Galfenol (FeGa) or boron-doped FeGa films onto diamond resonators; exploits delta-E effect and Lorentz force coupling.
- Photoconductive Gain Tuning: High-bias operation (≥32 V) triggers charge trapping at metal/diamond interface; thermionic-field emission (TFE) and field emission (FE) enable gain > 104.
- Sub-surface Junction Engineering: H-terminated epilayer on type-Ib HPHT substrate creates 2DHG/pn-junction enabling absolute transient negative photocurrent (TNPC) and low-dark-current DUV detection.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”| Research Requirement | Recommended 6CCVD Material | Key Properties |
|---|---|---|
| Solar-blind DUV photodetector (5S compliance) | Optical Grade SCD (Single Crystal Diamond) | Ultra-wide bandgap 5.5 eV, cut-off <280 nm, low sp2 content |
| High-gain photoconductive detector | Heavy Boron-Doped PCD (BDD) | Resistivity <0.1 Ω·cm, doping >1019 cm-3 available |
| UNCD nanowire UV detector (self-powered) | Boron-Doped Nanocrystalline Diamond | Nanowire-compatible, Pt nanoparticle functionalization ready |
| Sub-surface junction device | SCD on HPHT Substrate | Type-Ib substrate + H-terminated epilayer architecture |
| High-Q nanomechanical resonator | Electronic Grade SCD (Element Six equivalent) | Low dislocation density, Ra < 1 nm polish, Q > 106 achievable |
| MEMS magnetic sensor substrate | SCD Plates (100 orientation) | High Young’s modulus, thermal stability to 773 K |
| Diamond membrane (DOI structure) | Thinned SCD Membranes (0.1-10 µm) | Sub-micron thinning capability, surface roughness < 1 nm |
| Free-standing cantilever/bridge | SCD with Laser-Cut Geometry | Custom dimensions, batch production available |
Customization Potential
Section titled “Customization Potential”- Tailored Thickness Range: 6CCVD provides SCD and PCD films from 0.1 µm to 500 µm, plus thick substrate plates up to 10 mm—directly addressing the membrane thickness range (100 nm-1.44 µm) required for MEMS resonator fabrication demonstrated in this work.
- Wafer-Scale Options: PCD plates available up to 125 mm diameter; SCD mosaic and single-crystal wafers support inch-size device fabrication referenced in the DOI approach.
- Custom Metalization (In-House): Full-stack deposition of Au, Pt, Pd, Ti, W, Cu supports all contact architectures cited—Schottky (WC, Ti), Ohmic (Ti/Pt/Au), and interdigitated MSM finger electrodes. For WC Schottky contacts, metallization can be optimized for the 500°C thermal stability demonstrated in the paper.
- Laser Cutting & Dicing Services: Precision shaping of SCD cantilevers (L = 100 µm, W = 6 µm), bridges, and nanowire geometries; supports Faraday-cage-etching pre-patterning and final device release.
- Surface Termination Control: H-termination, O-termination, and UV-ozone modification protocols available as post-growth services to tune dark current and DUV responsivity per the 5S optimization framework.
- Boron Doping Gradient: Custom BDD layers with doping concentration from 1015 to >1020 cm-3 to engineer sub-surface junctions and photoconductive gain layers.
Engineering Support
Section titled “Engineering Support”6CCVD’s in-house PhD engineering team provides end-to-end material consultation for DUV photodetector and MEMS sensor development, including:
- Crystal Quality Selection: Guidance on dislocation density specifications (<104 cm-2 achievable) for low-dark-current solar-blind detection
- Doping Strategy: Recommending BDD layer thickness, concentration profiles, and post-growth annealing protocols to achieve responsivity targets up to 230 A/W
- MEMS Resonator Design: Material selection for high-Q factor applications; pairing SCD with appropriate annealing protocols (500°C, O2 ambient) for Q > 106 performance
- Hybrid Integration Consulting: Technical advice on interfacing magneto-strictive films (Galfenol, FeGa) with diamond substrates for magnetic sensor platforms
- Metallization Engineering: Stack design (e.g., Ti/Pt/Au, W-based Schottky) matched to device thermal budget and operational wavelength requirements
Call to Action
Section titled “Call to Action”For custom specifications, material consultation, or to request a quotation on optical-grade SCD, boron-doped diamond, or precision-machined MEMS substrates, visit 6ccvd.com or contact our engineering team directly. Global shipping available (DDU default, DDP upon request).
View Original Abstract
Diamond with an ultra-wide bandgap shows intrinsic performance that is extraordinarily superior to those of the currently available wide-bandgap semiconductors for deep-ultraviolet (DUV) photoelectronics and microelectromechanical systems (MEMS). The wide-bandgap energy of diamond offers the intrinsic advantage for solar-blind detection of DUV light. The recent progress in high-quality single-crystal diamond growth, doping, and devices design have led to the development of solar-blind DUV detectors satisfying the requirement of high Sensitivity, high Signal-to-Noise ratio, high spectral Selectivity, high Speed, and high Stability. On the other hand, the outstanding mechanical hardness, chemical inertness, and intrinsic low mechanical loss of diamond enable the development of MEMS sensors with boosted sensitivity and robustness. The micromachining technologies for diamond developed in these years have opened the avenue for the fabrication of high-quality single-crystal diamond mechanical resonators. In this review, we report on the recent progress in diamond DUV detectors and MEMS sensors, which includes the device principles, design, fabrication, micromachining of diamond, and devices physics. The potential applications of these sensors and a perspective are also described.
Tech Support
Section titled “Tech Support”Original Source
Section titled “Original Source”References
Section titled “References”- 2019 - Ultra-wide bandgap semiconductor materials