Widely-tunable single-frequency diamond Raman laser
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2021-08-19 |
| Journal | Optics Express |
| Authors | Xuezong Yang, Zhenxu Bai, Dijun Chen, Weibiao Chen, Yan Feng |
| Institutions | Macquarie University, University of Chinese Academy of Sciences |
| Citations | 42 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- System Achievement: Demonstration of a continuously-tunable, single-frequency diamond Raman laser producing up to 8 W CW output across the 590 nm - 625 nm (yellow-red) spectrum, maintaining SLM operation in the 590 nm - 615 nm band.
- Pumping Architecture: Utilizes a tunable all-fiber Yb-doped (YDF) pump laser (1020 nm - 1072 nm) with a relatively broad 25 GHz spectral linewidth (M² = 1.24), avoiding stimulated Brillouin scattering (SBS) limitations common in fiber amplifiers.
- Conversion Method: External standing-wave cavity utilizing Stimulated Raman Scattering (SRS) in a Type IIa CVD single-crystal diamond, followed by intracavity Second Harmonic Generation (SHG) in a LiB3O5 (LBO) crystal.
- Material Advantage: Exploits diamond’s exceptionally high Raman shift (1332.3 cm-1) to reach target wavelengths in a single Stokes shift, alongside its superior thermal conductivity to suppress thermal degradation at high powers.
- SLM Stabilization: Achieves single-longitudinal-mode output without a narrow-linewidth seed by leveraging the homogeneous gain profile of the Raman medium combined with longitudinal-mode competition induced by the intracavity SHG crystal.
- Scalability Potential: Modeling suggests a simple adjustment of the cavity output coupling (1.2%) and shortening of the LBO crystal (0.5 cm) could yield 9 W of Stokes power at 50 W of pump power, confirming a clear path to tens-of-watts scaling.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Output Wavelength Range | 590 - 625 | nm | SHG output (continuous tuning) |
| SLM Output Range | 590 - 615 | nm | Verified Single-Longitudinal-Mode operation |
| Max CW Output Power | 8 | W | Maximum continuous-wave power achieved |
| Pump Wavelength Range | 1020 - 1072 | nm | Yb-doped fiber pump tuning |
| Pump Spectral Linewidth | 25 | GHz | Broad linewidth to suppress SBS |
| Pump Beam Quality (M²) | 1.24 | - | Measured output of YDF amplifier |
| Raman Medium | CVD Single-Crystal Diamond | - | Type IIa, Element Six Ltd |
| Diamond Dimensions | 8 (L) × 4 (W) × 1.2 (H) | mm³ | Crystal cut for <110> beam propagation |
| Raman Shift | 1332.3 | cm-1 | First-order phonon frequency of diamond |
| SHG Crystal | LiB3O5 (LBO) | - | Cut at θ = 90°, φ = 0° |
| LBO Dimensions | 10 (L) × 4 (W) × 4 (H) | mm³ | Placed on TEC mount |
| Phase-Matching Temp | 10 - 40 | °C | LBO operating temperature range |
| Pump Beam Waist (Diamond) | 27 | µm | Calculated spot size |
| Stokes Beam Waist (Diamond) | 32 | µm | Calculated spot size |
| Stokes Beam Waist (LBO) | 90 | µm | Calculated spot size |
| Input Mirror Transmission | >98.5 (<99.9 reflective) | % | High transmission @ 1020-1080 nm; High reflection @ 1180-1260 nm |
| Output Coupler Transmission | 30 - 80 | % | Partial transmission @ 590-625 nm |
| Effective Raman Gain (Narrow Pump) | 0.72 | g0 | Normalized to narrow-linewidth pump |
| Effective Raman Gain (Broad Pump) | 0.264 | g0 | Disparity of 2.7x compared to narrow pump |
Key Methodologies
Section titled “Key Methodologies”- Pump Source Preparation: Constructed a linearly-polarized, tunable fiber laser utilizing a ring-cavity oscillator equipped with an etalon-based filter (1010 nm - 1090 nm range, 3 dB bandwidth of 1 nm, >0.1 nm resolution).
- Fiber Amplification: Amplified the seed through three stages of polarization-maintaining large-mode-area (LMA) Yb-doped fibers (PLMA-YDF-15/130-VIII and PLMA-YDF-20/130-VIII) to achieve high power while maintaining beam quality.
- Resonator Assembly: Built a near-concentric standing-wave cavity consisting of a plano-concave input mirror (50 mm RoC) and an output coupler (100 mm RoC).
- Crystal Alignment: Positioned the diamond crystal at the waist of the resonator and placed the LBO crystal approximately 4 mm away to optimize SHG.
- Polarization Control: Co-aligned the pump polarization, diamond <111> axis, and the LBO slow axis to maximize nonlinear efficiency.
- Thermal Management: Maintained LBO phase-matching via a thermoelectric cooler (TEC) mount operating between 10 °C and 40 °C.
- Mode Matching: Focused the pump beam into the resonator using a plano-convex lens (f = 50 mm) to match the calculated cavity modes.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”The architecture of this high-power, tunable single-frequency diamond Raman laser relies fundamentally on the optical purity and thermal resilience of the Raman gain medium. 6CCVD provides the advanced materials required to replicate or extend this research.
-
Applicable Materials:
- To achieve the high continuous-wave (CW) power and single-frequency stability reported, an Optical Grade Single Crystal Diamond (SCD) is required. 6CCVD provides ultra-low-loss, high-purity Type IIa SCD specifically engineered for high-power Raman laser cavities, offering exceptional thermal conductivity to mitigate thermal lensing even when scaling to tens-of-watts.
- If future iterations require alternative gain media for specific Raman shifts or UV resilience, our Polycrystalline Diamond (PCD) plates and wafers (up to 125mm) can be custom-fabricated to your application’s absorption and scattering parameters.
-
Customization Potential:
- The paper utilized a specific diamond geometry (8 × 4 × 1.2 mm³) cut for beam propagation along the <110> axis. 6CCVD specializes in custom diamond dimensions and crystallographic orientations to ensure optimal mode matching and polarization alignment for your specific resonator design.
- For systems requiring precise thermal control or complex integration, we offer full custom metalization services (including Ti, Pt, Au, Cu, and W). We can apply metal layers directly to the diamond for soldering to TEC mounts or heat sinks, ensuring minimal thermal boundary resistance.
-
Engineering Support:
- The success of this visible-range laser hinges on balancing the Stokes output coupling and LBO crystal length. 6CCVD’s in-house PhD engineering team can assist with material selection, advising on the optimal SCD geometry and orientation for your specific nonlinear intracavity setups (such as this intracavity frequency-doubled Raman oscillator).
- We provide comprehensive material consultation for researchers working on atomic clocks, quantum sensing, and high-power visible laser systems, helping you select the ideal diamond grade and surface polishing specifications (achieving Ra < 1nm for SCD) to minimize insertion loss and maximize the Raman gain coefficient.
-
Call to Action:
- For custom specifications, tailored crystallographic cuts, or material consultation on your laser project, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
We report a diamond Raman laser that is continuously-tunable across the range from 590 nm to 625 nm producing continuous wave output with up to 8 W. The system is based on an all-fiber and tunable (1020-1072 nm) Yb-doped pump laser with a spectral linewidth of 25 GHz that is Raman-shifted and frequency doubled in a cavity containing diamond and a lithium triborate second harmonic crystal. Despite the broad pump spectrum, single frequency output is obtained across the tuning range 590-615 nm. The results reveal a practical approach to obtain tunable high-power single-frequency laser in a wavelength region not well served by other laser technologies.