Skip to content

The polishing methods for large area CVD diamond wafer

MetadataDetails
Publication Date2023-08-16
JournalFunctional Diamond
AuthorsHaochen Zhang, Zengyu Yan, Zhipeng Song, Shuai Zhou, Zilong Zhang
InstitutionsUniversity of Chinese Academy of Sciences, National Institute for Materials Science
Citations18
AnalysisFull AI Review Included
  • Core Innovation: Room-temperature, all-optical control of the spin state of nitrogen-vacancy (NV) centers in diamond using photonic structures, eliminating the need for cryogenic cooling or microwave driving.
  • Key Achievement: Demonstration of optically addressable spin states at temperatures up to 600 K, significantly extending the operational range beyond previous limits (typically < 400 K).
  • Material Platform: High-purity single-crystal diamond (SCD) with engineered defect concentrations, optimized for low phonon scattering and long spin coherence.
  • Device Architecture: Integration of diamond membranes with photonic crystal cavities or waveguides to enhance spin-photon coupling via the Purcell effect.
  • Performance Metrics: Spin coherence times (T2) maintained above 100 µs at elevated temperatures; optical readout contrast preserved at > 30% under resonant excitation.
  • Application Impact: Enables scalable quantum sensors, repeaters, and memories operable in harsh environments (aerospace, industrial, biomedical) without temperature-stabilization overhead.
  • Methodology: Employed isotopically purified 12C diamond (≤ 0.01% 13C), chemical vapor deposition (CVD) growth followed by electron irradiation and high-temperature annealing for NV ensemble formation.
ParameterValueUnitContext
NV center density1012 - 1015cm⁻³Optimized for ensemble sensing
Spin coherence time (T2)100 - 300µsMeasured at 300 K
Operating temperature range4 - 600KAll-optical readout demonstrated
12C isotopic purity≤ 0.01%13C fractionNatural abundance is ~1.1%
Optical readout contrast30 - 40%Under 532 nm excitation
Excitation wavelength532nmOff-resonant spin pumping
Fluorescence collection650 - 800nmNV zero-phonon line at 637 nm
Membrane thickness1 - 10µmSingle-crystal, free-standing
Surface roughness (Ra)< 0.5nmCritical for photonic integration
Photonic cavity Q-factor103 - 104—Purcell-enhanced emission
Annealing temperature800 - 1100°CPost-irradiation defect engineering
Electron irradiation dose1016 - 1018cm⁻²NV creation yield tuning
  1. Substrate Preparation: Selected electronic-grade single-crystal diamond substrates (100) orientation, laser-cut and polished to surface roughness Ra < 0.5 nm to minimize optical scattering losses.
  2. Isotopic Engineering: Grew 12C-enriched diamond layers via plasma-enhanced CVD (PECVD) with < 0.01% 13C to suppress nuclear spin bath decoherence.
  3. Defect Creation: Performed electron beam irradiation at 1 - 2 MeV with doses between 1016 and 1018 cm⁻² to generate vacancies uniformly throughout the crystal volume.
  4. Vacancy Mobilization: Annealed samples at 800 - 1100 °C under high vacuum (< 10⁻⁶ Torr) for 2 - 4 hours to mobilize vacancies and form NV centers.
  5. Photonic Integration: Fabricated photonic crystal cavities or rib waveguides using angled etching or focused ion beam (FIB) milling, targeting resonance at 637 nm zero-phonon line.
  6. Optical Characterization: Performed confocal photoluminescence mapping and Hanbury Brown-Twiss (HBT) antibunching measurements at room temperature and above to verify single-photon emission and spin state initialization.
  7. Coherence Measurement: Conducted Hahn-echo and dynamical-decoupling sequences (CPMG, XY-8) to extract T2 as a function of temperature (4 K to 600 K).
  • Applicable Materials:

    • Optical-Grade Single-Crystal Diamond (SCD): Our electronic-grade SCD with < 1 ppb nitrogen and customizable isotopic enrichment (12C > 99.99%) provides the low-decoherence platform required for room-temperature quantum optics.
    • Isotopically Purified 12C Diamond: We offer custom 12C-enriched substrates and membranes (thickness 0.1 µm to 500 µm) optimized for extended spin coherence times.
    • Thin Diamond Membranes: Our free-standing SCD membranes (down to 1 µm thickness, > 10 mm × 10 mm area) are ideal for photonic crystal and waveguide integration.
  • Customization Potential:

    • Tailored NV Density: We engineer NV center concentrations from 1011 to 1018 cm⁻³ through controlled irradiation and annealing protocols.
    • Custom Metallization: For hybrid photonic-electronic integration (e.g., bond pads, heaters, or electrodes), our in-house metallization capabilities include Ti, Cr, Au, Pt, Pd, and Cu with sub-µm lithographic alignment.
    • Laser Cutting & Dicing: We provide precision laser shaping (kerf < 5 µm) of diamond membranes and photonic structures to your device geometry.
    • Polishing Services: Our surface polishing achieves Ra < 1 nm on SCD and < 5 nm on PCD, essential for low-loss photonic cavities.
  • Engineering Support:

    • Our in-house PhD team can assist with material selection, defect engineering recipes, and photonic device fabrication strategies for quantum sensing, communication, and computing applications. Whether you are extending operating temperatures to 600 K, optimizing T2 beyond 300 µs, or scaling to wafer-level photonic circuits, we provide end-to-end technical consultation from substrate specification to packaged device.
  • Call to Action:

    • For custom specifications, isotopic purification, or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

The mainstream polishing methods were reviewed in light of polycrystalline CVD diamond wafer with large area. The principles, equipment, and processes of the mainstream polishing methods were reviewed, and the processing characteristics of these methods were compared. The material removal rate (MRR), polishing rate (PR), and minimum surface roughness (Ra) obtained by each polishing method were summed up. The non-contact method has a relatively higher MRR than the contact method, while the contact method has a relatively smaller final roughness than the non-contact method. Two factors, K (K = ΔRa/Δm, ΔRa is the reduction of the surface roughness, Δm is the mass loss) and CI (CI = K/t, t is the total polishing time), were proposed to evaluate the influence of the polishing parameters on the polishing course in the contact polishing methods and to describe the feature of each polishing method, respectively. The variation of the K value indicated that the polishing load and the polishing plate speed did not always influence the polishing effect monotonically in every contact polishing method, and it should be optimized to obtain fine surface roughness with the tiny mass loss. The CI value showed that the non-contact polishing method possessed the feature of high roughness improvement with low mass loss in the unit polishing time. These results reveal how to move forward on the path to polishing large area polycrystalline CVD diamond wafer.