Skip to content

Characterizing novel Indium Phosphide pad detectors with focused X-ray beams and laboratory tests

MetadataDetails
Publication Date2024-11-01
JournalJournal of Instrumentation
AuthorsE. R. Almazan, A. A. Affolder, Ian Dyckes, V. Fadeyev, M. Hance
InstitutionsLawrence Berkeley National Laboratory, Argonne National Laboratory

Abstract Future tracking systems in High Energy Physics experiments will require large instrumented areas with low radiation length. Crystalline silicon sensors have been used in tracking systems for decades, but are difficult to manufacture and costly to produce for large areas. We are exploring alternative sensor materials that are amenable to fast fabrication techniques used for thin film devices. Indium Phosphide pad sensors were fabricated at Argonne National Lab using commercially available InP:Fe 2-inch mono-crystal substrates. Current-voltage and capacitance-voltage characterizations were performed to study the basic operating characteristics of a group of sensors. Micro-focused X-ray beams at Canadian Light Source and Diamond Light Source were used to study the response to ionizing radiation, and characterize the uniformity of the response for several devices. Electrical test results showed a high degree of performance uniformity between the 48 tested devices. X-ray test beam results showed good performance uniformity within tested devices after accounting for spatially-local defects and edge fields. This motivates further studies into thin film devices for future tracking detectors.

  1. 2023 - Thin film charged particle detectors [Crossref]
  2. 2024 - Novel indium phosphide charged particle detector characterization with a 120 GeV proton beam [Crossref]
  3. 2022 - Active Region Extent Assessment with X-rays (AREA-X) [Crossref]
  4. 2020 - Mapping the in-plane electric field inside irradiated diodes [Crossref]
  5. 2021 - Measuring the border of the active area on silicon strip sensors [Crossref]
  6. 2022 - Review of Particle Physics [Crossref]