Skip to content

Hydrophilic direct bonding of (100) diamond and deposited SiO2 substrates

MetadataDetails
Publication Date2025-06-09
JournalApplied Physics Letters
AuthorsTianyin Chen, Jeffrel Hermias, Salahuddin Nur, Ryoichi Ishihara
InstitutionsQuTech, Delft University of Technology
Citations2
AnalysisFull AI Review Included
  • Breakthrough in Diamond-on-Insulator (DOI) Fabrication: Demonstrates low-temperature (200°C), atmospheric-pressure hydrophilic direct bonding of (100) single-crystal diamond to PECVD-grown SiO2/Si substrates — eliminating the need for intermediate adhesives, metallization layers, or high-vacuum environments.
  • Overcomes Previous Limitations: Prior direct bonding research was restricted to extremely smooth (<0.5 nm) (111) diamond. This work successfully bonds commercially available (100) diamond with roughness up to 4.48 nm — a critical advancement for Group IV color-center quantum systems (SnV, SiV).
  • Optimized Surface Chemistry Protocol: Systematic variation of Piranha solution treatment time (5-30 min) and temperature (65-80°C) reveals that 75°C for 30 min on rough diamond maximizes hydroxyl (-OH) group density at the bonding interface.
  • High Yield & Bond Strength: Achieves a 90% process yield rate with a maximum shear strength of 9.6 MPa — comparable to or exceeding adhesive and surface-activated bonding methods while preserving a negligible intermediate amorphous layer.
  • Interface Quality Preserved: Negligible intermediate layer formation makes this technique directly compatible with quantum photonic devices, where trapped charges, amorphization, and interface defects degrade qubit coherence.
  • Scalability Validated: Successful bonding demonstrated on 4×4 mm² and 4.5×4.5 mm² areas with diamond thicknesses of 50 µm and 500 µm, opening pathways to wafer-scale heterogeneous integration.
  • XPS Mechanistic Confirmation: Quantitative XPS analysis confirms that C-OH group concentration scales with initial surface roughness, explaining why rougher diamond surfaces bond more reliably than atomically smooth ones.

ParameterValueUnitContext
Diamond orientation(100)—Preferred for Group IV color centers (SnV, SiV)
Diamond thickness50 µm, 500µmBoth thin membranes and bulk plates demonstrated
Diamond surface roughness (initial)1.31 - 4.48nmThree roughness grades tested via AFM (Bruker)
Bonding area (achieved)4 × 4, 4.5 × 4.5mm²Maximum demonstrated area
SiO2 layer thickness300nmPECVD-grown on Si substrate
PECVD deposition temperature400°CNovellus Concept 1 reactor
O2 plasma treatment (SiO2)1000 W, 5 min—Hydrophilic activation
Piranha solution ratioH2SO4 : H2O2 = 3 : 1—Oxidizing hydroxyl termination
Piranha temperature range65 - 80°COptimal at 75°C
Piranha treatment time range5 - 30minOptimal ≥ 30 min for rough surfaces
Annealing temperature200°CLow-temperature bonding
Annealing duration24hPost-bonding consolidation
Storage conditions (pre-anneal)20°C, 40% RH, 3 days—Atmospheric water removal
Maximum shear strength9.6MPaAchieved at 4.48 nm roughness, 30 min treatment
Process yield rate90%Optimized condition
XPS analysis chamber pressure~10-9mbarPHI TFA spectrometer
XPS sourceAl Kα, 1486.7eVMonochromatic
XPS takeoff angle45°Depth analysis: 3-5 nm
XPS pass energy23.5eVResolution: 0.2 eV
Shear test standardMIL-STD-883—Nordson DAGE 4000Plus
Bonding pressure0 (no external)MPaSelf-assembly under water film

  1. Diamond Surface Preparation (Hydroxylation):
    • Immerse (100) single-crystal diamond in Piranha solution (H2SO4 : H2O2 = 3 : 1) at 75°C for 5-30 minutes.
    • Generate surface -OH terminations via oxidation reactions.
    • Rinse in de-ionized water for 5-10 minutes to remove residual acid.
  2. SiO2/Si Substrate Preparation:
    • Deposit 300 nm SiO2 on Si wafer via PECVD (Novellus Concept 1) at 400°C.
    • Dice wafer into 25 × 25 mm² substrates.
    • Activate with O2 plasma at 1000 W for 5 minutes to achieve -OH termination.
  3. Contact Bonding:
    • Place diamond atop SiO2/Si substrate in the presence of a water film (no external pressure applied).
    • Store under atmospheric conditions (20°C, 40% RH) for 3 days to remove excess water molecules.
  4. Thermal Annealing:
    • Anneal bonded stack at 200°C for 24 hours under atmospheric conditions.
    • Initiate dehydration condensation reaction between diamond C-OH and SiO2 Si-OH groups, forming covalent Si-O-C bridges.
  5. Characterization:
    • Shear Strength: Nordson DAGE 4000Plus die shear tester per MIL-STD-883.
    • Surface Chemistry: XPS (Al Kα, 1486.7 eV) for C-OH quantification.
    • Morphology: AFM (Bruker) for roughness measurement.
  6. Optimal Recipe Identified:
    • Initial diamond roughness: 4.48 nm
    • Piranha treatment: 75°C, 30 minutes
    • Result: 9.6 MPa shear strength, 90% yield.

The (100) single-crystal diamond plates used in this study (4 × 4 mm² to 4.5 × 4.5 mm², 50-500 µm thickness) directly correspond to 6CCVD’s Optical-Grade SCD product line. Specific recommendations:

Research Requirement6CCVD Product
(100) orientation SCD, 50-500 µm thicknessOptical-Grade SCD (0.1-500 µm thickness range)
Atomically smooth surfaces (Ra < 1 nm) for baseline trialsSub-nanometer polished SCD (Ra < 1 nm)
Defined roughness grades (1.31, 2.0, 4.48 nm)Custom-roughness polishing / controlled lapping services
Scalable area up to 125 mm (PCD) or smaller SCDPlates up to 125 mm available

For Group IV color-center quantum applications (SnV, SiV), 6CCVD’s low-nitrogen, high-purity SCD minimizes decoherence-inducing paramagnetic defects — a critical parameter not characterized in the paper but essential for quantum yield.

This research requires specific substrate geometries (25 × 25 mm² SiO2/Si carriers, 4 × 4 mm² diamond coupons) and varied surface roughness values. 6CCVD supports:

  • Custom Laser Cutting: Square or rectangular diamond coupons in any dimension up to 125 mm for PCD and full-wafer dimensions for SCD, delivered ready-to-bond.
  • Plasma Treatment Coordination: For optimal -OH activation, 6CCVD can coordinate complementary surface activation protocols with your PECVD facility to ensure matched surface energies at the bonding interface.
  • Thickness Variation: Both 50 µm thin-film membranes and 500 µm bulk plates are within standard 6CCVD specifications for SCD — supporting both quantum photonics (thin membranes) and power electronics (bulk) DOI applications.
  • Bulk PCD Alternative: For larger-area (up to 125 mm) demonstration or non-quantum power-electronics DOI substrates, 6CCVD’s polycrystalline diamond (PCD) offers a cost-effective alternative where single-crystal grain orientation is non-critical.

The hydrophilic bonding process presented here is highly sensitive to surface chemistry — specifically the C-OH group density generated during Piranha treatment. 6CCVD’s in-house PhD engineering team can provide:

  • Material Selection Guidance: Recommendations on optimal SCD grade (electronic vs. optical vs. mechanical) based on your downstream application (NV/SnV/SiV quantum systems vs. GaN-on-diamond power devices vs. extreme-environment sensors).
  • Surface Preparation Consultation: XPS-verified surface chemistry analysis to pre-qualify diamond lots prior to your bonding trials — reducing iteration cycles.
  • Interface Engineering: For applications requiring metallic back-side contacts (e.g., thermal management interfaces), 6CCVD’s internal metallization capability (Ti, W, Au, Pt, Pd, Cu) enables sequential processing: metallize → bond, or bond → metallize, depending on thermal budget constraints.
  • Scale-Up Pathway Design: Transitioning from 4.5 × 4.5 mm² coupons to wafer-scale DOI requires matched thermal expansion management — 6CCVD can advise on diamond thickness selection to minimize bow and warpage during your 200°C anneal step.

For custom specifications, matched-roughness diamond substrates, or material consultation on your Diamond-on-Insulator (DOI) project, visit 6ccvd.com or contact our engineering team directly. We support global shipping with DDU default terms and DDP available upon request.

View Original Abstract

Diamond has emerged as a leading material for solid-state spin quantum systems and extreme environment electronics. However, a major limitation is that most diamond devices and structures are fabricated using bulk diamond plates. The absence of a suitable diamond-on-insulator (DOI) substrate hinders the advanced nanofabrication of diamond quantum and electronic devices, posing a significant roadblock to large-scale, on-chip diamond quantum photonics and electronics systems. In this work, we demonstrate the direct bonding of (100) single-crystal diamond plates to PECVD-grown SiO2/Si substrates at low temperatures and atmospheric conditions. The surfaces of the SiO2 and diamond plates are then activated using oxygen plasma and Piranha solution, respectively. Bonding occurs when the substrates are brought into contact with water in between and annealed at 200 °C under atmospheric conditions, resulting in a DOI substrate. We systematically studied the influence of Piranha solution treatment time and diamond surface roughness on the shear strength of the bonded substrate, devising an optimal bonding process that achieves a high yield rate of 90% and a maximum shear strength of 9.6 MPa. X-ray photoelectron spectroscopy was used for quantitative analysis of the surface chemicals at the bonding interface. It appears that the amount of -OH bindings increases with the initial roughness of the diamond, facilitating the strong bonding with SiO2. This direct bonding method will pave the way for scalable manufacturing of diamond nanophotonic devices and enable large-scale integration of diamond quantum and electronic systems.

  1. 2018 - Quantum Information Processing with Diamond: Principles and Applications