Skip to content

A New Hope for All-Diamond Electrodes? The Interdigitated Double Diamond Electrode

MetadataDetails
Publication Date2025-11-22
JournalElectrochem
AuthorsManuel Zulla, Carolin Messerschmidt, Hanadi Ghanem, Johannes Bähr, Lukas Hegemann
InstitutionsFriedrich-Alexander-Universität Erlangen-Nürnberg
Citations1
AnalysisFull AI Review Included
  • Novel Electrode Architecture: Introduces the Interdigitated Double Diamond Electrode (iDDE), an “all-diamond” planar microelectrode utilizing a single Boron-Doped Diamond (BDD) layer on a non-conductive ceramic substrate, where the anode and cathode are electrically isolated via laser structuring.
  • Energy Efficiency Breakthrough: The iDDE concept consumes 14-46% less energy than standard BDD/Steel setups during batch-mode degradation of glucose in poorly conductive electrolytes (κ < 350 µS/cm).
  • Microscale Interelectrode Spacing (IES): Laser-induced micro-structuring reduces the IES to below 50 µm (with variations down to 20 µm), eliminating the need for supporting electrolytes or proton exchange membranes.
  • Sustainable Material Sourcing: Utilizes abundant kaolinite-cordierite ceramic substrates instead of rare, conflict-prone metals like Niobium (Nb) and Tantalum (Ta), significantly lowering environmental impact and production costs.
  • High Local Current Density: Achieves local current density maxima (j) of ≥ 1 A/cm² within the Primary Interelectrode Zone (PIEZ), facilitating efficient hydroxyl radical (•OH) generation for mineralization.
  • Scalable Fabrication: Demonstrates batch-coating capability (up to 18 samples per run) using Hot-Filament CVD (HFCVD) at 850°C, yielding a growth rate of 0.17 µm/h on ceramics.
  • Operational Versatility: Supports polarity reversal during Electrochemical Advanced Oxidation Processes (EAOPs), allowing for the removal of pH-dependent precipitates and extended service life.
ParameterValueUnitContext
Substrate MaterialKaolinite-Cordierite—Non-conductive ceramic mass
Substrate Dimensions5 x 5 x 0.25cmWith 4 x Ø4 mm contact holes
BDD Layer Thickness~7µmMicrocrystalline morphology
Deposition Temperature850 ± 10°CHFCVD substrate temperature
Filament Power Density10W/cm²Activation energy
Chamber Pressure3.3mbarReactive gas phase
Hydrogen (H₂) Flow1000mL/minCarrier gas
Methane (CH₄) Flow12mL/minCarbon source
Trimethylborate (TMB) Flow0.15mL/minBoron doping source
Growth Rate0.17µm/hOver a 42-hour coating cycle
Interelectrode Spacing (IES)< 50 (down to 20)µmAchieved via laser structuring
Laser Wavelength1064nmInfrared structuring laser (Rofin 100D)
Laser Power / Frequency100 / 10W / kHz—
Applied Voltage (iDDE)7.1 - 8.0VGlucose degradation tests
Applied Voltage (Standard BDD)9.8 - 11.8VBDD-Si/Steel reference
Operating Current0.5ACurrent-controlled mode
Electrolyte Conductivity Limit< 350µS/cmOptimal for low-conductivity matrices
Local Current Density (PIEZ)≥ 1A/cm²Peak edge-effect density
Electrolysis Temperature20 ± 1.5°CWater bath homogenization
COD Removal (75%) Energy Savings46%Compared to standard BDD-Si/Steel
Surface Roughness / PolishVariable—Dependent on application requirements
  • Substrate Preparation: Ceramic substrates particle-blasted (SiC-F150, 4 bar), ultrasonically cleaned in ethanol, and seeded with nano-diamond suspension (uDiamond Hydrogen-D, 1:500 in ethanol).
  • BDD Deposition (HFCVD): Aligned between two parallel filament rows (30 mm apart) in a custom HFCVD machine; processed at 850°C and 3.3 mbar using a H₂/CH₄/TMB gas mixture for 42 hours.
  • Laser Structuring: Selective removal of the BDD layer using a 1064 nm infrared laser (60 mm/s speed) to create an interdigitated pattern with a total path length of 233.8 cm per sample side.
  • Electrochemical Cleaning: Anodization of laser-structured gaps at 10 V in distilled water for 2 minutes to remove residual sp² carbon.
  • Comparative Electrochemical Setup: Batch-mode electrolysis (250 mL volume) using a magnetic stirrer (150 rpm); tested against a commercial BDD-Si anode (5 x 5 x 0.3 cm) and V2A steel cathode with an IES of 800 µm.
  • Analytical Characterization: Morphological and structural evaluation via SEM, LSM, XRD, and Raman spectroscopy (focusing on sp³/sp² ratios and doping homogeneity).
  • Performance Testing: Glucose oxidation (1 g/L) monitored via Chemical Oxygen Demand (COD) reduction using photometric cuvette tests; validated by cathodic copper deposition (0.0015 mol/L CuSO₄·5H₂O).
  • Applicable Materials: To replicate or extend this iDDE architecture, 6CCVD recommends utilizing our Optical Grade or Heavy Boron-Doped Polycrystalline Diamond (PCD) coatings. Our PCD is optimized for high sp³ phase purity and tunable boron concentrations (heavy doping levels), ensuring high local current densities and maximized •OH generation in low-conductivity electrolytes.
  • Customization Potential:
    • Precision Laser Structuring: The paper relies on laser ablation to achieve < 50 µm IES. 6CCVD offers advanced custom micro-structuring and laser cutting services to pattern diamond electrodes exactly to your required interdigitated or mesh geometries.
    • Dimensional Scalability: While this study used 5 cm x 5 cm substrates, 6CCVD is equipped to deposit on plates and wafers up to 125mm (PCD) or thicker custom substrates (up to 10mm), allowing for larger reactor formats and industrial scaling.
    • Metalization: For current collector integration (e.g., the Ti stripes used in this study), we provide in-house metalization services with high-adhesion films including Ti, Pt, Au, Pd, W, and Cu.
    • Thickness Control: Our deposition capabilities span from 0.1µm to 500µm for SCD and PCD, accommodating both ultra-thin microelectrode arrays and thick, highly durable structural diamond components.
  • Engineering Support: The complex interplay between sp²/sp³ ratios, boron doping, and local current density (as highlighted in the paper’s Raman analysis) is critical for EAOP efficiency. 6CCVD’s in-house PhD engineering team can assist with material selection and CVD recipe optimization to tailor the electrochemically active surface area for your specific wastewater treatment or advanced oxidation projects.
  • Logistics & Delivery: We support global R&D and industrial clients with flexible shipping terms (DDU default, DDP available) to ensure your custom diamond electrodes arrive securely, regardless of destination.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Nowadays, the development of efficient water treatment processes is increasingly driven by the need to provide solutions for contaminants of emerging concern. Electrochemical advanced oxidation processes (EAOPs) based on diamond electrodes can be part of innovative removal concepts. However, expensive substrates, energy-intensive chemical vapor deposition (CVD) of diamond, and market availability complicate matters for diamond electrodes to gain traction in the water treatment sector. In addition, it has to be stated that the mining and complex processing of necessary substrates like Si, Ti, Nb, or Ta need a significant amount of fresh water, which counteracts the need for more sustainability in the field of EAOPs. In this context, a ceramic-based boron-doped diamond (BDD) electrode is presented, which addresses this dilemma. The presented concept of the so-called interdigitated double diamond electrode (iDDE) consumes 14-46% less energy in batch-mode experiments to degrade an organic model molecule compared to standard BDD technology in a poorly conductive electrolyte (κ < 350 µS/cm). Laser-induced micro-structuring of the BDD layer reduces the interelectrode spacing (IES) of the iDDE to below 50 µm. The structuring approach at the micrometer scale enables the treatment of electrically low-conductivity electrolytes more energy efficiently, while reducing the need for a supporting electrolyte or a proton exchange membrane. Degradation experiments and Raman measurements reveal different properties of an iDDE compared to standard BDD technology. The iDDE concept highlights the need to understand the significance of non-uniform current density distributions on the general electrochemical activity of BDD electrodes.

  1. 2021 - Occurrence of pharmaceutical residues, personal care products, lifestyle chemicals, illicit drugs and metabolites in wastewater and receiving surface waters of Krakow agglomeration in South Poland [Crossref]
  2. 2009 - Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany [Crossref]
  3. 2021 - Recent advances in advanced oxidation processes for removal of contaminants from water: A comprehensive review [Crossref]
  4. 2024 - Non-active anodes based on boron-doped diamond, PbO2 and SnO2-Sb for anodic oxidation of water contaminants: Synthesis, properties, and recent advances [Crossref]
  5. 1993 - Electrochemical oxidation of phenol for wastewater treatment using SnO2, anodes [Crossref]
  6. 1996 - Electrocatalysis in anodic oxidation of organics with simultaneous oxygen evolution [Crossref]
  7. 1999 - Oxidation of Organics by Intermediates of Water Discharge on IrO2 and Synthetic Diamond Anodes [Crossref]
  8. 2025 - The world impact of boron doped diamond electrodes and low-cost strategies for novel production systems for sustainable wastewater treatment [Crossref]
  9. 2022 - Factors and challenges in the recovery of niobium and tantalum from mineral deposits, recommendations for future development—A review [Crossref]