Skip to content

Spin-photon correlations from a Purcell-enhanced diamond nitrogen-vacancy center coupled to an open microcavity

MetadataDetails
Publication Date2025-11-27
JournalNature Communications
AuthorsJulius Fischer, Yanik Herrmann, Cornelis F. J. Wolfs, Stijn Scheijen, Maximilian Ruf
InstitutionsDelft University of Technology, Eindhoven University of Technology
Citations4
AnalysisFull AI Review Included
  • Platform Innovation: Demonstration of a coherently controlled diamond Nitrogen-Vacancy (NV) center electron spin qubit optically interfaced with an open fiber-based Fabry-Pérot microcavity, achieving an order-of-magnitude improvement over conventional Solid Immersion Lens (SIL) architectures for quantum networking.
  • Purcell Enhancement: Measured Purcell factor of 7.3 ± 1.6 in the low-frequency (LF) cavity mode, reducing the excited state lifetime from 9.5 ± 0.4 ns (off-resonance) to 7.8 ± 0.2 ns.
  • Photon Collection Efficiency: Achieved a coherent photon detection probability of 0.5% per pulse, representing a 10× improvement over the ~5 × 10⁻⁴ baseline of SIL-based quantum network nodes.
  • Coherent Qubit Control: Demonstrated microwave-driven Rabi oscillations at Ω = 10.73 ± 0.02 MHz, with a π-pulse fidelity of 83 ± 9% and a free-induction decay time of T2* = 170 ± 20 ns.
  • Multi-Qubit State Generation: Successfully generated two-qubit (Bell) and three-qubit (GHZ) spin-photon states, with heralded spin-photon correlations confirming Z-basis correlations between photonic time-bin qubits and the electron spin.
  • System Architecture: Utilized a diamond membrane bonded to a dielectric Bragg sample mirror with an integrated gold stripline (10 µm from the NV), enabling simultaneous optical addressing and microwave control.
  • Projected Performance: Theoretical pathway to 5% ZPL detector click probability by reducing device losses, establishing this platform as a viable route to high-rate remote entanglement for distributed quantum computing.

ParameterValueUnitContext
Optical transition (Ey)470.377THzNV center readout transition frequency
PLE linewidth (FWHM)45 ± 3MHzMeasured on LF cavity mode
Cavity quality factor (Q)280 × 10³—Individual polarization mode
Cavity polarization mode splitting9.56 ± 0.02GHzAttributed to membrane birefringence
Cavity mode linewidth1.69 ± 0.02GHzIndividual polarization mode
Cavity mode volume86λ³—Simulated effective mode volume
Cavity outcoupling efficiency39%Through sample mirror
Excitation laser suppression> 60dBVia cross-polarization filtering
Purcell factor (LF mode)7.3 ± 1.6—Determined via lifetime reduction
Purcell factor (HF mode)2.0 ± 1.4—High-frequency cavity mode
Off-resonance lifetime (τoff)9.5 ± 0.4nsCavity detuned by −4 GHz
Purcell-reduced lifetime (LF)7.8 ± 0.2nsOn resonance
Purcell-reduced lifetime (HF)9.0 ± 0.2nsOn resonance
ZPL emission into LF mode (βLF)~18%Coherently emitted
Outcoupled ZPL emission~7%Practical system efficiency
Max detector click probability (current)0.5%Per excitation pulse
Projected detector click probability1.4%With improved excitation efficiency
Theoretical ZPL click probability~5%Optimized device quality
Second-order correlation g⁽²⁾(0)0.034 ± 0.005—Single-photon emission verified
Qubit frequency (microwave)2.773GHzms = 0 ↔ ms = −1 transition
Rabi frequency (Ω)10.73 ± 0.02MHzCoherent spin control
π-pulse fidelity83 ± 9%Corrected for initialization
π-pulse duration64nsFixed qubit rotation time
Free-induction decay (T2*)170 ± 20nsRamsey measurement
Hahn-Echo coherence envelope180µsGaussian decay constant
ms = ±1 Zeeman splitting210MHzAt 37.5 G static field
Spin initialization fidelity93.5 ± 0.9%Optical pumping to ms = 0
Heralding probability (Bell)0.54%Per attempt (27143 events / 5×10⁶ attempts)
Heralding probability (GHZ)2.4 × 10⁻⁵—Per attempt (5242 events / 220×10⁶ attempts)
Magnetic field~37.5GAlong NV crystal axis
Cryostat base temperature~6KClosed-cycle Montana HILA
Sample mirror temperature~8KOperating temperature
Microwave transmission loss26dBThrough cryostat at qubit freq
Pulse sequence repeat rate126nsInter-pulse spacing
Cavity vibration level (residual)22pmLimits max Purcell factor to 12

  • Diamond Membrane Fabrication: Micrometer-thin etched diamond membrane (per Ref. [39]) bonded to a dielectric Bragg sample mirror with an integrated 10 µm-distant gold stripline for microwave delivery.
  • Microcavity Assembly: Fiber-based Fabry-Pérot cavity formed by the planar sample mirror and a laser-ablated spherical mirror on a single-mode optical fiber tip (Coherent FUD-4519, S630-P).
  • Cryogenic Operation: Floating-stage closed-cycle optical cryostat (Montana Instruments HILA) at 6 K base temperature with cryo-compatible nanopositioning (JPE CPSHR1-a) for cavity tuning.
  • Optical Initialization: 515 nm charge repump laser (Hübner Cobolt 06-MLD) to prepare NV⁻ state, followed by 637 nm E₁ transition pulse for spin pumping to ms = 0 (Toptica DL Pro).
  • Resonant Readout Excitation: Nanosecond-short pulses (2 ns) generated via temperature-stabilized EOM (Jenoptik AM635) modulated by a home-built pulse generator, with frequency stabilization to a wavemeter (HighFinesse WS-U).
  • Cross-Polarization Filtering: Excitation via vertical polarization cavity mode; ZPL collection via horizontal mode through a polarizing beamsplitter, with piezo-rotated waveplates providing active > 60 dB laser suppression via hill-climbing optimization.
  • Cavity Locking: Side-of-fringe lock using 637 nm cavity lock laser (Newport Velocity TLB-6300-LN) at ~700 kHz count rate, with proportional feedback controlling the fiber mirror piezo.
  • Lifetime Measurement: Monoexponential fits over 5-18 ns detection window with background subtraction to isolate Purcell-reduced emission.
  • PLE Characterization: Photoluminescence excitation scan with 515 nm repump interleaving, Gaussian fitting yielding FWHM linewidth.
  • HBT Verification: Pulsed second-order correlation measurement using 30 consecutive excitation pulses with 126 ns spacing, collected over 55 × 10⁶ repetitions.
  • Coherent Qubit Control: SSB-modulated microwave (Rohde & Schwarz SMBV100A) amplified (Mini-Circuits ZHL-50W-63+) delivered via gold stripline; π and π/2 pulses calibrated via five-pulse minimization.
  • Spin-Photon State Generation: π/2-π-π microwave sequence interleaved with two resonant excitation pulses, followed by Z-basis spin readout using 200 short excitation pulses.
  • Qubit Readout Calibration: Photon statistics histograms for ms = 0 and ms = ±1 initial states, with average fidelity optimal at 200 readout pulses.

The successful implementation of this Purcell-enhanced NV-cavity interface requires ultra-high-quality single-crystal diamond membranes with specific dimensional, optical, and surface engineering attributes. Below is a direct mapping between the research requirements and 6CCVD’s technical offerings.

Research RequirementRecommended 6CCVD ProductRationale
Thin, low-strain diamond membrane with bulk-like NV optical coherenceOptical Grade SCD (Single Crystal Diamond)Homogeneous, low-strain crystal lattice preserves lifetime-limited optical linewidth (essential for the 45 MHz PLE FWHM demonstrated).
Micrometer-thick membrane with smooth bonding surfaceCustom SCD Thinned Membranes (0.1 µm - 500 µm)6CCVD’s precision thinning capabilities support fabrication of the micrometer-scale membranes required for fiber-based Fabry-Pérot integration.
Diamond with embedded stripline proximity (~10 µm from NV)SCD with Custom Metallization (Au, Ti, Pt, Pd, W, Cu)In-house metalization enables embedded microwave delivery structures directly on the diamond surface, critical for Rabi control at 10.73 MHz.
Strain-engineered photonic environmentCustom Polished SCD (Ra < 1 nm)Sub-nanometer surface roughness minimizes scattering losses and supports high cavity Q (280 × 10³ demonstrated).
  • Custom Dimensions: The research utilizes thin diamond membranes bonded to Bragg sample mirrors. 6CCVD provides custom-cut SCD plates and wafers up to 125 mm with thicknesses precisely controlled from 0.1 µm to 500 µm, enabling membrane geometries tailored to specific cavity mode volume requirements (e.g., 86λ³ in this work).
  • Integrated Metallization: The paper’s gold stripline (delivering 2.773 GHz microwave control) demands lithographically defined, low-loss conductors. 6CCVD’s internal Au, Ti, Pt, Pd, W, and Cu metalization capabilities support custom stripline patterns, ground planes, and bond pad geometries directly on diamond substrates.
  • Laser Cutting & Dicing: For hybrid integration into cryogenic Fabry-Pérot assemblies, 6CCVD offers precision laser cutting to achieve the specific chip dimensions required for bonding to sample mirror substrates.
  • Surface Polishing: Both the SCD membrane face (toward cavity) and the bonded face (toward mirror) demand ultra-smooth surfaces. 6CCVD’s Ra < 1 nm polishing for SCD supports the low-scatter, high-finesse cavity conditions required for Q ~ 280,000.

6CCVD’s in-house PhD engineering team provides direct consultation on material selection for quantum photonics and spin-photon interface research. Our team can advise on:

  • NV-density optimization: Tailoring nitrogen concentration during MPCVD growth to balance NV creation yield against optical inhomogeneous broadening.
  • Strain engineering: Crystal growth orientation and post-processing protocols to minimize birefringence-induced polarization mode splitting (e.g., the 9.56 GHz splitting observed here, attributed to membrane strain).
  • Membrane thinning protocols: Achieving uniform, etch-free thin membranes suitable for low-roughness bonding to dielectric Bragg mirrors.
  • Metallization adhesion: Selection of Ti/Au or Cr/Au stacks for cryogenic-compatible microwave striplines with minimal thermal stress.
  • Surface preparation: Plasma cleaning and annealing protocols to optimize NV charge state stability (NV⁻ preparation via 515 nm repump in this work).

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

An efficient interface between a spin qubit and single photons is a key enabling system for quantum science and technology. We report on a coherently controlled diamond nitrogen-vacancy center electron spin qubit that is optically interfaced with an open microcavity. Through Purcell enhancement and an asymmetric cavity design, we achieve efficient collection of resonant photons, while on-chip microwave lines allow for spin qubit control at a 10 MHz Rabi frequency. With the microcavity tuned to resonance with the nitrogen-vacancy center’s optical transition, we use excited state lifetime measurements to determine a Purcell factor of 7.3 ± 1.6. Upon pulsed resonant excitation, we find a coherent photon detection probability of 0.5% per pulse. Although this result is limited by the finite excitation probability, it already presents an order of magnitude improvement over the solid immersion lens devices used in previous quantum network demonstrations. Furthermore, we use resonant optical pulses to initialize and read out the electron spin. By combining the efficient interface with spin qubit control, we generate two-qubit and three-qubit spin-photon states and measure heralded Z-basis correlations between the photonic time-bin qubits and the spin qubit. Current applications of NV centers in diamond as spin-photon interfaces for quantum networks are limited by low coherent photon emission. Here, the authors integrate a coherently controlled NV spin qubit with an open microcavity to achieve Purcell-enhanced emission and demonstrate spin-photon state generation.