Skip to content

Enhancing the Quality of Diamond Film Growth Through the Synergistic Addition of Nitrogen and Carbon Dioxide

MetadataDetails
Publication Date2026-01-04
JournalMaterials
AuthorsZhanpeng Sheng, Xuejian Cui, Lei Zhao, Yihan Lv, Rongchen Zhang
InstitutionsNingbo Institute of Industrial Technology, Zhejiang University of Technology
Citations1
AnalysisFull AI Review Included

Technical Documentation: Synergistic N2/CO2 Co-Doping for High-Quality MPCVD Diamond Films

Section titled “Technical Documentation: Synergistic N2/CO2 Co-Doping for High-Quality MPCVD Diamond Films”
  • Methodology: Co-doping of ultra-low concentration nitrogen (≤40 ppm) with trace carbon dioxide (1 sccm) during MPCVD to fabricate free-standing polycrystalline diamond (PCD) films on 2-inch Si substrates.
  • Growth Rate Enhancement: Nitrogen increased the deposition rate by 3.1× (1.125 µm/h → 3.475 µm/h at 40 ppm N2); CO2 co-doping further elevated rates to 3.75 µm/h.
  • Texture Control: CO2 introduction promoted a highly ordered <111>-oriented crystallographic texture, mitigating nitrogen-induced lattice distortion.
  • Defect Suppression: CO2 etch chemistry (OH• radicals) selectively removed sp2 carbon and reduced NV0 (575 nm) and NV− (637 nm) defect luminescence intensities.
  • Thermal Performance: Best sample (S4: 12.48 ppm N2 + 1 sccm CO2) achieved a thermal conductivity of 1863.94 W·m−1·K−1, recovering 98.3% of the undoped baseline.
  • Residual Stress Reduction: Stress decreased from −1.57 GPa (N-only) to −1.31 GPa (N+CO2), indicating partial strain relief.
  • Application Target: Thermal management for high-power integrated circuits under extreme heat-flux conditions.
ParameterValueUnitContext
Substratep-type Si (100), 2-inch, 3 mm thick—Heteroepitaxial growth platform
H2 Flow Rate400sccmCarrier gas
CH4 Flow Rate12sccmCarbon precursor (CH4:H2 = 3:100)
N2 Concentration Range0 - 39.84ppmVia 1% N2/H2 mixture (0-1.6 sccm)
CO2 Flow Rate0 or 1sccmSelective etchant addition
Microwave Power3.8kWPlasma excitation
Chamber Pressure100TorrOptimized for <111> growth
Substrate Temperature850 ± 10°CMonitored by IR pyrometer
Growth Duration40hPer deposition run
Max Growth Rate3.75µm/hSample S6 (39.84 ppm N2 + CO2)
Thermal Conductivity (Best)1863.94W·m−1·K−1Sample S4 (12.48 ppm N2 + CO2)
Thermal Diffusivity (Best)1020.29mm2·s−1Measured via laser flash (LFA 467)
Thermal Conductivity (Baseline)1896.93W·m−1·K−1Undoped S0 reference
Raman FWHM (Best)4.174cm−1Sample S5 — lowest defect density
Raman FWHM (Worst)7.382cm−1Sample S3 — 39.84 ppm N-only
Raman Peak Shift (Best)1332.91cm−1Sample S6 — closest to stress-free diamond
Residual Stress (N-only)−1.57GPaSample S1 — compressive
Residual Stress (N+CO2)−1.17GPaSample S5 — lowest stress
Diamond Density (ρ)3.52g·cm−3Used for thermal conductivity calc.
Specific Heat Capacity (Cp)0.519J·g−1·K−1Standard CVD diamond value
Heating/Cooling Rate~15°C/minControlled thermal ramp
  • Substrate Preparation:
    • Ultrasonic cleaning in absolute ethanol to remove organic residue.
    • Nanodiamond seeding with W10 colloidal suspension in ethanol.
    • Secondary ultrasonication in acetone.
    • Unidirectional mechanical abrasion using lint-free cloth to embed seeds.
    • Bake-out in dry air before chamber loading.
  • MPCVD System:
    • Disc-shaped resonant cavity reactor (GMP60KIPT400, max 6 kW).
    • Operating at 3.8 kW, 100 Torr, 850 ± 10 °C.
  • Gas Chemistry Strategy:
    • Base gas: H2/CH4 = 100/3.
    • Nitrogen introduced via 1% N2/H2 mixture (0-1.6 sccm).
    • CO2 co-dosed at 0 or 1 sccm for defect suppression.
  • Post-Growth Processing:
    • HF/HNO3 wet etching (3:1 volume ratio) to remove Si substrate.
    • Rinse in deionized water; air dry.
    • Mirror polishing with ~2.5 µm diamond abrasive on SPG40-II polisher.
  • Characterization Suite:
    • XRD: Cu K-α (λ = 1.5406 Å), 2θ = 30°-130°, step 0.02°/s.
    • Raman: Diamond peak at 1332 cm−1; stress analysis via peak shift.
    • SEM: Regulus 8230 (Hitachi) for grain morphology.
    • PL Spectroscopy: NV0 (575 nm) and NV− (637 nm) defect tracking.
    • LFA 467: Laser flash thermal diffusivity measurement.

This paper’s results provide a clear benchmark for high-thermal-conductivity PCD targeted at semiconductor thermal management. The following 6CCVD capabilities directly map to the study’s requirements:

  • Applicable Materials:

    • Optical-Grade Free-Standing PCD: The paper’s free-standing films (post-Si-etch) align with 6CCVD’s thick PCD plate offerings (0.1 µm-500 µm thickness range, up to 10 mm substrate-equivalent bulk).
    • Thermal-Management PCD: The <111>-textured films achieving ~1863 W·m−1·K−1 are ideal for GaN-on-Diamond or high-power LED heat spreaders. 6CCVD provides PCD optimized for thermal management with grain-boundary engineering.
    • Low-Nitrogen PCD: To replicate the study’s defect-controlled chemistry, 6CCVD can deliver PCD with ultra-low NV defect density for optical/IR window applications.
  • Customization Potential:

    • Thickness Scaling: While the paper used 40-hour runs to reach ~150 µm, 6CCVD can scale thicknesses from thin films to bulk plates using optimized multi-cycle MPCVD recipes.
    • Wafer Dimensions: The paper used 2-inch Si substrates; 6CCVD extends to plates/wafers up to 125 mm diameter for larger-format PCD.
    • Surface Finishing: The study relied on post-growth polishing (2.5 µm diamond slurry). 6CCVD offers in-house polishing to Ra &lt; 5 nm for inch-size PCD, eliminating downstream processing steps.
    • Metalization: For direct integration onto IC heat-spreader stacks, 6CCVD provides internal Ti/Pt/Au, W, and Cu metalization. A Ti adhesion layer + Au or Pt finishing is standard for die-attachment applications requiring robust thermal contact.
    • Laser Cutting: Custom die geometries for chip-on-diamond assemblies can be achieved via 6CCVD’s laser cutting services.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team routinely assists clients in selecting between SCD, PCD, and BDD for thermal, optical, and electrochemical use cases.
    • For projects targeting high-power GaN/AlN IC thermal management, 6CCVD can recommend the optimal balance of grain size, texture, and nitrogen doping level to maximize thermal conductivity while meeting IR/optical transmission requirements.
    • Whether replicating the N2/CO2 co-doping strategy or scaling to production-grade reactors, 6CCVD offers material consultation from recipe design through metallization and dicing.
  • Call to Action: For custom specifications, material consultation, or quotations on thermal-management-grade PCD, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

This study investigates the synergistic effects of co-doping with ultralow-concentration nitrogen and trace carbon dioxide on the growth of polycrystalline diamond films via microwave plasma chemical vapor deposition (MPCVD). The films were characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and photoluminescence spectroscopy. Results indicate that trace nitrogen effectively promotes &lt;111&gt; oriented growth and enhances the deposition rate, whereas excessive nitrogen leads to the formation of defects such as pores and microcracks. The introduction of CO2 suppresses the formation of nitrogen-vacancy-related defects through a selective etching mechanism. Under co-doping conditions, diamond films with high growth rates, strong &lt;111&gt; texture, and superior thermal conductivity (up to 1863.94 W·m−1·K−1) were successfully synthesized, demonstrating significant potential for thermal management applications in high-power integrated circuits.

  1. 2024 - Significantly Enhanced Interfacial Thermal Conductance across GaN/Diamond Interfaces Utilizing AlxGa1-xN as a Phonon Bridge [Crossref]
  2. 2020 - Past Achievements and Future Challenges in the Development of Infrared Antireflective and Protective Coatings [Crossref]
  3. 2018 - Direct observations of crystal defects in polycrystalline diamond [Crossref]
  4. 2012 - TEM observations of dislocations in plastically deformed diamond [Crossref]
  5. 2004 - EPR study of hydrogen-related defects in boron-doped p-type CVD homoepitaxial diamond films [Crossref]
  6. 2004 - Hydrogen-related defects in single crystalline CVD homoepitaxial diamond film studied by EPR [Crossref]
  7. 2003 - Study of deep defects in polycrystalline CVD diamond from thermally stimulated current and below-gap photocurrent experiments [Crossref]
  8. 2009 - Microwave engineering of plasma-assisted CVD reactors for diamond deposition [Crossref]
  9. 2024 - Vapor phase nucleation and sedimentation of dispersed nanodiamonds by MPCVD [Crossref]